Axxess LOC-GMH3 Manual


Læs gratis den danske manual til Axxess LOC-GMH3 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Axxess LOC-GMH3, eller vil du spørge andre brugere om produktet?

Side 1/4
MetraOnline.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 9/6/23 INSTAX-LOC
AX-LOC
INSTALLATION INSTRUCTIONS
TABLE OF CONTENTS
Things to Know .......................................................1
Connections
Adding a Subwoofer and Amplifier to Your
Factory system-Keeping Factory Speakers .... 2
Adding a 4 Channel Amplifier-Entire System
Not Using Radio’s Output ................................. 3
Specifications .........................................................4
LOC T-Harnesses have vehicle specific applications.
Please visit AxxessInterfaces.com for the latest and up to date application information.
TOOLS RECOMMENDED
• Digital Multi-meter
• Test Tones
Things to Know
LOC T-harnesses are installed at the radio and designed for non-amplified vehicles. You can find dash
disassembly instructions from the Vehicle Fit Guide on AxxessInterfaces.com
It is recommended that a polarity tester and tone generator be used before connecting your
aftermarket equipment.
If your vehicle doesn’t have an accessory circuit your LOC T-Harness will not have an accessory (Red)
wire in the harness. Refer to the AX-LOC instructions for remote turn on options. Some vehicles
require the addition of load resistors, there are multiple options available. We recommend AX-LR20,
AX-LR39, and AX-LR60.
Proper termination of loose wires is required.


Produkt Specifikationer

Mærke: Axxess
Kategori: Ikke kategoriseret
Model: LOC-GMH3

Har du brug for hjælp?

Hvis du har brug for hjælp til Axxess LOC-GMH3 stil et spørgsmål nedenfor, og andre brugere vil svare dig