Axxess LOC-NIH1 Manual


Læs gratis den danske manual til Axxess LOC-NIH1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Axxess LOC-NIH1, eller vil du spørge andre brugere om produktet?

Side 1/4
MetraOnline.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 9/6/23 INSTAX-LOC
AX-LOC
INSTALLATION INSTRUCTIONS
TABLE OF CONTENTS
Things to Know .......................................................1
Connections
Adding a Subwoofer and Amplifier to Your
Factory system-Keeping Factory Speakers .... 2
Adding a 4 Channel Amplifier-Entire System
Not Using Radio’s Output ................................. 3
Specifications .........................................................4
LOC T-Harnesses have vehicle specific applications.
Please visit AxxessInterfaces.com for the latest and up to date application information.
TOOLS RECOMMENDED
• Digital Multi-meter
• Test Tones
Things to Know
LOC T-harnesses are installed at the radio and designed for non-amplified vehicles. You can find dash
disassembly instructions from the Vehicle Fit Guide on AxxessInterfaces.com
It is recommended that a polarity tester and tone generator be used before connecting your
aftermarket equipment.
If your vehicle doesn’t have an accessory circuit your LOC T-Harness will not have an accessory (Red)
wire in the harness. Refer to the AX-LOC instructions for remote turn on options. Some vehicles
require the addition of load resistors, there are multiple options available. We recommend AX-LR20,
AX-LR39, and AX-LR60.
Proper termination of loose wires is required.


Produkt Specifikationer

Mærke: Axxess
Kategori: Ikke kategoriseret
Model: LOC-NIH1

Har du brug for hjælp?

Hvis du har brug for hjælp til Axxess LOC-NIH1 stil et spørgsmål nedenfor, og andre brugere vil svare dig