• Do not drop, disassemble, open, crush, bend, deform, puncture, shred,
microwave, incinerate, paint, submerge in a liquid, or insert foreign objects
into the power bank.
• Keep power banks out of the reach of children. Children should be
supervised when a power bank is in use.
• Do not expose power banks to heat or re. Do not store in direct sunlight or
in a vehicle.
• Do not use or charge a damaged power bank. In the event of a power bank
leaking, keep away from skin and eyes. Wash any aected area with large
amounts of water and seek medical attention.
• Power banks need to be charged before use.
Always use the correct cable and refer to the power bank manufacturer’s
instructions for proper charging instructions.
• Do not use any cable other than that specically provided or recommended
by the power bank manufacturer.
• Do not use a damaged cable to charge or discharge a power bank.
• Do not leave a power bank on prolonged charge when not in use.
• Disconnect the power bank from the charging source once full.
• Observe the dedicated input and output ports for receiving and providing
power on the power bank and the device to be charged to ensure correct use.
• Do not use any power bank which is not designed for use with the device
you wish to charge. Refer to the device’s manual for proper charging
instructions.
• When possible, detach the cable(s) from power bank when not in use.
• Only use the power bank in the application for which it was intended.
• Store the power bank in a cool, dry place when not in use. When a power
bank is not used for prolonged periods, the power bank should be charged
periodically in order to maintain power bank life.
• Dispose of the power bank properly.
• Do not place metal objects between devices and the wireless charging
pads.
• Recharge the power bank if it has not been used for more than 90 days.
• Risk of res and burns. Do not open, crush, heat above 140° F (60° C), or
incinerate. Follow the instructions.
• Operating environment temperatures: 32~95° F (0~35° C)
• Do not place this device in re or other excessively hot environments.
• This product is intended for home oce use, and for indoor use only.
• Consult local sta before using the product near medical or industrial
equipment or on board an aircraft.
• Unplug the power bank if not used for an extended period of time.
• Make sure that your mobile phone is compatible with wireless charging
before using.
• Make sure that the charging plate is placed on a at surface.
• Make sure that the mobile phone does not move away from the charging
pad’s wireless inductive charging area. Most non-metallic protective
cases can be used for charging. The thickness of the case should not
exceed 0.1 in. (3 mm). Make sure that the case contains no metal.
• When metal is placed in the charging area, the charging plate
automatically recognizes the metal and turns the power o.
Normal charging resumes when the metal is removed.
• When the temperature of the charging pad is too high, the automatic
protection mode turns on and the power bank turns o. Unplug the
power supply then use the charging pad when it returns to a normal
temperature.
• Keep all instructions provided with the device for future reference.
• People with pacemakers should keep away from the magnets. The
magnets can negatively aect the function of the pacemaker.
• Do not place any bank or similar cards with magnetic strips or
magnetically sensitive objects on the product. The data on the cards could
be damaged or completely deleted.
• Ensure that there are no metal parts on the back of your device. Metal
heats up signicantly in the eld of an induction charger and can damage
your device and/or the charger.
Legal notices
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC Caution:
Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Statement:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
RF Exposure: This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or
transmitter.
RSS-Gen statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Ce dispositif contient des émetteurs exonérés de permis(s)/récepteurs)s
2. Ce dispositif doit accepter toute interférence, y compris les interférences
qui sont conformes aux RSS (s) exemptés de licence du Canada. L’opération
est soumise aux deux conditions suivantes :
1. Cet appareil peut ne pas causer d’interférences.
2. Ce dispositif doit accepter toute interférence, y compris les interférences
qui peuvent provoquer un fonctionnement indésirable de l’appareil.
RSS-102 Statement
This equipment complies with IC RSS_102 radiation exposure limits set
forth for an uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux radiations IC
CNR_102 établies pour un environnement non contrôlé.
