Black Lion Audio Auteur DT Manual

Black Lion Audio Ikke kategoriseret Auteur DT

Læs gratis den danske manual til Black Lion Audio Auteur DT (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Black Lion Audio Auteur DT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Audio ‘Lion Face’ logo, BLA, are trademarks

or registered trademarks of Black Lion Audio.

This manual and any associated intel-

lectual property are subject to copyright

protection. No part of this document may

be reproduced in any form without explicit

written consent from Black Lion Audio.

Notice

This manual provides general information, preparation for

use, installation and operating instructions for the Black Lion

Audio Auteur DT.

The information contained in this manual is subject to

change without notice. Black Lion Audio makes no warran-

ties of any kind with regard to this manual, including, but not

limited to, the implied warranties of merchantability and t-

ness for a particular purpose. Black Lion Audio shall not be

liable for errors contained herein or direct, indirect, special,

incidental, or consequential damages in connection with the

furnishing, performance, or use of this material.

Auteur DT

Transformer-coupled Desktop Preamplier

Owner’s Manual

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or third prong is provided for your safety. If the pro-

vided plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particular-

ly at plugs, convenience receptacles, and the point where they exit

from the apparatus. If the power cord becomes frayed, stop using

immediately.

11. Use only attachments/accessories specied by the manufacturer

12. Use only with a cart, stand, tripod, bracket or table specied by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid in-

jury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such as

power supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been ex-

posed to rain or moisture, does not operate normally, or has been

dropped.

15. This apparatus shall not be exposed to dripping or splashing, and

no object lled with liquids, such as vases, shall be placed on the

apparatus.

16. Note that this apparatus is not completely disconnected from the

AC mains service when the power switch is in the OFF position.

17. The mains plug or power inlet on the product is used as the discon-

nect device, so the disconnected device shall remain readily opera-

ble when reconnected.

18. Any changes or modications not expressly approved in this manu-

al could void your authority to operate this apparatus.

IMPORTANT !

Be sure to use a three prong AC cable that properly ts the power

source. Please use the correct fuse designated on the rear panel be-

fore plugging in the power cord. Improper selection can result in dam-

age to the unit that will not be covered under the warranty.

The lightning ash with an arrow-

head symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsu-

lated “dangerous voltage” within

the product’s enclosure that may

be of sucient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

The Black Lion Audio Auteur DT complies with all applicable / RoHS/

WEEE European Union directives.

Do not attempt to service this unit yourself, as it will void your warran-

ty. Please check your unit carefully upon receipt and return to place

of purchase immediately if there are any problems with the product.

After that, the standard Black Lion Audio 3 YEAR warranty will apply

to defects in materials and workmanship.

INTERNATIONAL

For service or warranty assistance, please contact the Black Lion Au-

dio distributor in your country through the dealer from whom you pur-

chased this product.

LIMITED 3-YEAR WARRANTY

Black Lion Audio’s Auteur DT is warranted by Black Lion Audio to be free

from defects in materials and workmanship for the period of THREE (3)

YEARS to the original purchaser. In the event of such defects, the prod-

uct will be repaired without charge or, at our option, replaced with a new

one if delivered to Black Lion Audio prepaid, together with a copy of the

sales slip or other proof of purchase date. The warranty excludes prob-

lems due to normal wear, abuse, shipping damage or failure to use the

product in accordance with the specications.

All parts and labor are covered under this Limited Warranty. However,

if it is determined by Black Lion Audio that the device was damaged or

made defective through abuse, we reserve the right to charge the cus-

tomer for the cost of the repair.

Black Lion Audio shall not be liable for damages based upon inconve-

nience, loss of use of the product, loss of time, interrupted operation or

commercial loss or any other damages, whether incidental, consequen-

tial or otherwise. This warranty gives you specic legal rights, and you

may have other rights, which will vary from state to state.

This warranty is not transferable.

HOOKUP AND QUICK START

1. On your sound system, mute your studio monitors.

2. Connect AC power to the Auteur DT and set power switch to OFF.

3. Connect your input source(s) via balanced XLR or TRS cable(s).

Microphone-level sources connect to the back panel XLR input,

while instrument-level and line-level sources utilize the front panel

TRS input.

4. Connect your Auteur DT’s Output to your patch bay, audio interface,

or subsequent signal processor using the appropriate TRS cable.

5. Set all controls to the fully counter-clockwise position, and all push-

buttons deselected or to the off position.

6. Set Auteur DT’s Power switch to ON.

7. Engage the pushbutton options according to the requirements of

the input source (HI-Z for instruments or 48V for condenser mics) .

8. Unmute studio monitors.

9. Turn Gain Knob clockwise until the desired signal amplitude is

achieved.

1. Power: Flip switch up to turn preamp on, ip switch down to turn

preamp off.

2. Gain: Clockwise rotation yields an increase in output signal ampli-

tude, counterclockwise rotation yields a decrease in output signal

amplitude.

3. 48V: Engage to turn phantom power on, disengage to turn phantom

power off.

4. Phase Inverse (Ø): Engage to adjust input signal polarity by 180°,

disengage to leave input signal polarity unchanged.

5. Pad: Engage to reduce input signal amplitude by 10dBu, disengage

to leave input signal amplitude unchanged.

6. Hi-Z: Engages the Hi-Z Instrument Input for DI use.

7. Hi-Z Instrument Input: Unbalanced, instrument level TS input for

instrument connection.

8. VU Meter: Analog VU displays the output level of the Auteur DT.

9. AC IN: 24VAC input jack (only use a BLA-specied power supply).

10. TRS OUT: Balanced, line-level TRS output.

11. XLR Microphone Input: Balanced mic-level input.

SPECIFICATIONS

Preamp Type Solid State

Number of Channels 1

Phantom Power Yes

Pad -10 dB

Analog Inputs XLR / 1/4″ TRS

Analog Outputs 1/4″ TRS

Frequency Response 10 Hz-30 kHz bandwidth

Power Source 24 V AC power supply, minimum 300 mA

2.5 mm center pin

Dimensions Width – 157 mm / 6.1875"

Height – 49.2 mm / 1.9375"

Depth – 171 mm / 6.75"

Weight 2.3 lbs.

1 72 43 5 86

9 10 11

Produkt Specifikationer

Mærke:	Black Lion Audio
Kategori:	Ikke kategoriseret
Model:	Auteur DT

Har du brug for hjælp?

Hvis du har brug for hjælp til Black Lion Audio Auteur DT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Black Lion Audio Manualer

Black Lion Audio Auteur DT Manual

28 September 2025

Black Lion Audio PBR XLR Manual

2 August 2025

Black Lion Audio LS-4 Manual

17 Juli 2025

Black Lion Audio PBR TRS-BT Manual

6 Juli 2025

Black Lion Audio Bluey 500 Manual

3 April 2025

Black Lion Audio Micro Clock MkIII XB Manual

25 December 2024

Black Lion Audio Revolution 14x16 Manual

11 December 2024

Black Lion Audio PG-2R Manual

9 December 2024

Black Lion Audio PG-P Type C Manual

5 September 2024

Black Lion Audio PBR TRS3 Manual

5 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Axxess GMOS-01 Manual

30 September 2025

Samsung AM26B2B2A Manual

30 September 2025

Martin Audio Blackline S218 Manual

30 September 2025

Vestil EHLTP-3648-2-48-A1 Manual

30 September 2025

Vestil AHS-6-10-12 Manual

30 September 2025

Hansgrohe Talis E Manual

30 September 2025

Vestil EHLTP-3664-3-60-D2 Manual

30 September 2025

Vestil AHSN-8-15-16 Manual

30 September 2025

Axxess LC-GMRC-01 Manual

30 September 2025

Vestil CRF-144 Manual

30 September 2025