Black Lion Audio PBR TT Manual

Black Lion Audio Ikke kategoriseret PBR TT

Læs gratis den danske manual til Black Lion Audio PBR TT (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 83 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 42 anmeldelser. Har du et spørgsmål om Black Lion Audio PBR TT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Owner’s Manual

SIGNAL FLOW IN YOUR TT PATCHBAY

The ow of signal through a patchbay module is affected by

both physical connections and mode setting (Normalled, Non-

normalled, or Half-Normalled.) The most common conguration

for a patchbay is for signals to come in to the patchbay from the top

rear connections, and out of the patchbay from the bottom rear

connections. Conversely, on the front of the patchbay, the top row

connections are outputs and the bottom row connections are inputs.

With jacks connected to the top rear and bottom rear of

a single patchbay module, signals coming into a top rear

connection are passed directly through to the output on the

bottom rear, as shown here. This connection style should

be used for your hardware’s “default” conguration - the way

you want your signals to ow on a day-to-day basis.

When no jacks are connected to the top connections of a module, a

signal from the front bottom input is passed through to the rear bottom

output.

When all four jacks are connected to a patchbay module, a signal

connected to a rear top input of the patchbay is passed to the front top

output, while signal from the front bottom input is passed to the rear

bottom output.

NORMALLED OPERATION

When a module is set to Normalled and connections are made to the

top rear and top front jacks, the signal is passed through from the

top rear to the top front - breaking the connection shown in gure 1.

A Normalled conguration allows you to run several devices in series by

using patch cables on the front of the patchbay to interconnect several

of your devices. For example, you could run a signal from a preamp, to a

compressor, and nally to a reverb. A cable inserted into the bottom

rear will have its connection broken when a cable is inserted into the

top front.

HALF-NORMALLED OPERATION

When a module is set to Half-Normalled and connections are made to

the rear top, rear bottom, and front top jacks, the signal is passed

through from the top rear to the top front - without breaking the

connection shown in gure 1.

This allows you to use the patchbay as a mult (splitter), sending the

signal coming into the patchbay to two different destinations; very

useful for parallel processing of your signal and monitoring

applications. Inserting a cable in to the front bottom jack of a

half-normalled module will break the connection between the rear

jacks.

NON-NORMALLED OPERATION

AKA “open.” In non-normalled conguration, the top and bottom

rows of jacks are not connected at all. Modules set to non-normalled

operation will pass signal straight through from front-to-back

or back-to-front, but not vertically. Useful for setups where you

do not want your devices to automatically route anywhere.

ON PHANTOM POWER

We advise against running phantom power through your patchbay,

as this makes it possible to send phantom power to a device

not designed to handle it; expensive damage could result!

DB25 WIRING CONVENTION

The PBR TT Patchbay uses the Tascam DB25 wiring convention.

Some audio equipment uses the Yamaha convention. Check the

documentation for your other DB25 hardware to ensure compatibility.

NOTICE

This manual provides general information, preparation for use, installation and oper-

ating instructions for the Black Lion Audio PBR-Series Patchbays.

The information contained in this manual is subject to change without notice. Black

Lion Audio makes no warranties of any kind with regard to this manual, including, but

not limited to, the implied warranties of merchantability and tness for a particular

purpose. Black Lion Audio shall not be liable for errors contained herein or direct, indi-

rect, special, incidental, or consequential damages in connection with the furnishing,

performance, or use of this material.

or registered trademarks of Black Lion Audio.

This manual and any associated intellectual property are subject to

any form without explicit written consent from Black Lion Audio.

Fig. 2

Fig. 1

Fig. 3

Fig. 4

Fig. 5

PBR TT

Patchbay

The PBR TT offers 96 points of connectivity for your studio gear,

allowing for permanent installation and routing of your favorite

hardware while still allowing for exible and creative patching.

The PBR TT Patchbay offers Normalled, Non-Normalled, and Half-

Normalled operation, switchable from the top of the unit on a

per-module basis. A module, in this context, is any set of vertically-

aligned jacks on the patchbay; TT on the front and DB25 on the

back.

A typical patchbay conguration will have device outputs sent to

the top rear row of patch points with device Inputs connected to

the rear bottom row. For example, you would connect the Input of a

delay unit or compressor to a DB25 output connection on the rear

of the patchbay, and connect the delay’s Output to a DB25 Input

connection, also on the rear.

A note on cable choice:

We’ve tested the following brands of cables for a secure, reliable

connection: Hosa, Mogami, Rean, Neutrik, and RedCo. We advise

against using cables from other manufacturers.

1. Balanced TT connections: Accepts TT (Bantam) jacks for connect-

ing and routing your audio gear. Accepts balanced connections.

2. Normal/Non-Normalled/Half-Normalled Switches: Switch-

es the routing for its respective module between Normal,

Non-Normal, and Half Normalled operation. Switch up =

Half-Normal, Switch mid = Non-normal. Switch down = Normal

3. DB25 connections. Accepts DB25 connections (eight channels

in a breakout cable) for connecting to the inputs and outputs of

your outboard equipment. Common convention is to connect the

top row of connections to device outputs and the bottom row to

device inputs.

4. Grounding lug. Connect this to your outboard equipment using a

ground wire to prevent noise from ground loops.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus that produce heat.

9. Use only attachments/accessories specied by the manufacturer

10. Use only with a cart, stand, tripod, bracket or table specied by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid in-

jury from tip-over.

11. Refer all servicing to qualied service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such as

power supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been ex-

posed to rain or moisture, does not operate normally, or has been

dropped.

12. This apparatus shall not be exposed to dripping or splashing, and

no object lled with liquids, such as vases, shall be placed on the

apparatus.

13. Any changes or modications not expressly approved in this manu-

al could void your authority to operate this apparatus.

Do not attempt to service this unit yourself, as it will void your warran-

ty. Please check your unit carefully upon receipt and return to place

of purchase immediately if there are any problems with the product.

After that, the standard Black Lion Audio 3 YEAR warranty will apply

to defects in materials and workmanship.

U.S.A.

Should your Black Lion Audio product require service,

please contact us on our customer service site:

https://www.blacklionaudio.com/contact. You must obtain an RA #

(Return Authorization number) from us before shipping a unit back to

us. This RA # must be clearly written on the outside of the box.

Please safely pack the units…It is best to use the original packing

materials. Black Lion Audio cannot be responsible for any damag-

es incurred in shipping to us due to poor packaging. PLEASE PACK

CAREFULLY and FULLY INSURE THE SHIPMENT.

INTERNATIONAL

For service or warranty assistance, please contact the Black Lion Au-

dio distributor in your country through the dealer from whom you pur-

chased this product.

LIMITED 3 YEAR WARRANTY

Black Lion Audio’s PBR TT Patchbays are warranted by Black Lion Audio

to be free from defects in materials and workmanship for the period of

THREE (3) YEARS to the original purchaser. In the event of such defects,

the product will be repaired without charge or, at our option, replaced

with a new one if delivered to Black Lion Audio prepaid, together with a

copy of the sales slip or other proof of purchase date. The warranty ex-

cludes problems due to normal wear, abuse, shipping damage or failure

to use the product in accordance with the specications.

All parts and labor are covered under this Limited Warranty. However,

if it is determined by Black Lion Audio that the device was damaged or

made defective through abuse, we reserve the right to charge the cus-

tomer for the cost of the repair.

Black Lion Audio shall not be liable for damages based upon inconve-

nience, loss of use of the product, loss of time, interrupted operation or

commercial loss or any other damages, whether incidental, consequen-

tial or otherwise. This warranty gives you specic legal rights, and you

may have other rights, which will vary from state to state.

This warranty is not transferable.

CONNECTIONS

Produkt Specifikationer

Mærke:	Black Lion Audio
Kategori:	Ikke kategoriseret
Model:	PBR TT

Har du brug for hjælp?

Hvis du har brug for hjælp til Black Lion Audio PBR TT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Black Lion Audio Manualer

Black Lion Audio Auteur DT Manual

28 September 2025

Black Lion Audio PBR XLR Manual

2 August 2025

Black Lion Audio LS-4 Manual

17 Juli 2025

Black Lion Audio PBR TRS-BT Manual

6 Juli 2025

Black Lion Audio Bluey 500 Manual

3 April 2025

Black Lion Audio Micro Clock MkIII XB Manual

25 December 2024

Black Lion Audio Revolution 14x16 Manual

11 December 2024

Black Lion Audio PG-2R Manual

9 December 2024

Black Lion Audio PG-P Type C Manual

5 September 2024

Black Lion Audio PBR TRS3 Manual

5 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Pioneer SXT-C10PS Manual

2 Oktober 2025

Draper 51132 Manual

2 Oktober 2025

Structural Concepts Reveal NE4820HSV Manual

2 Oktober 2025

Draper 82755 Manual

2 Oktober 2025

Structural Concepts Harmony HMO6353R Manual

2 Oktober 2025

Advantech UTC-320F Manual

2 Oktober 2025

Teesa TSA2010 Manual

2 Oktober 2025

Draper Expert 16098 Manual

2 Oktober 2025

Structural Concepts Grocerant FB4SS-3R Manual

2 Oktober 2025

Draper 51690 Manual

2 Oktober 2025