Blustream HEX11WP-TX Manual


Læs gratis den danske manual til Blustream HEX11WP-TX (4 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Blustream HEX11WP-TX, eller vil du spørge andre brugere om produktet?

Side 1/4
HEX11WP-TX QUICK REFERENCE GUIDE
contact: support@blustream.co.uk / support@blustream.com.au
HEX11WP-TX
Quick Reference Guide
01
Our HEX11WP HDMI wall plate HDBaseT™ Transmitter is a 4K solution that extends
HDMI up to 70m at 1080p (40m at 4K 60Hz 4:2:0). The HEX11WP-TX has been
designed to work with all Blustream HDBaseT™ Receiver and Matrix solutions, be
installed in both UK and European backboxes and can be powered locally or from
compatible Blustream HDBaseT™ products.
Introduction
FEATURES:
Advanced HDBaseT™ technology oering distribution of video and audio over a single CAT cable
Supports 4K UHD video up to 40m (3840 x 2160 @30Hz 4:4:4, 4096 x 2160 @24Hz 4:4:4, and 4K @60Hz 4:2:0)
Extends HDMI at 1080p up to a distance of 70m
Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD
Master Audio transmission
Supports 12V-48V PoC from compatible Blustream HDBaseT™ Receiver / Matrix products
Bi-directional RS-232 pass through
Supports IR pass-through to HDBaseT™ device
Compatible with all Blustream HDBaseTReceiver / Matrix products*
Magnetic faceplate surround allowing both UK & EU backbox compatibility
HDCP 2.2 support
*Technical performance is subject to the features supported on the connected HDBaseT™ device
HEX11WP-TX QUICK REFERENCE GUIDE
www.blustream.com.au / www.blustream.co.uk
02
Front Panel Description
1 Power status indicator - Illuminates when powered
2 HDBaseT™ link status indicator - Illuminates when the Transmitter is connected to a HDBaseT™ Receiver / Matrix
product successfully
3 IR Receiver - Built in IR sensor for IR passthrough
4 HDMI input - Type A HDMI port to connect HDMI source
5 HDBaseT™ output - RJ45 HDBaseT™ port to connect to the input port of the compatible Blustream HDBaseT
HDBaseT™ Receiver / Matrix device
6 12V DC input - 2-pin phoenix connector to connect to Blustream 12V power supply (supplied)
7 IR Receiver Input - 3-pin phoenix connector to connect to Blustream IR Receiver (not supplied)
8 RS-232 - 3-pin phoenix connector for RS-232 passthrough to / from compatible Blustream HDBaseT™ device
1 2 3 4
6 7 85
Rear Panel Description
EDID Management
Please note this unit does not feature EDID management. As HDBaseT is limited to 10.2Gbps video signals, please
make sure your source device only outputs a HDMI signal within this bandwidth. A video signal beyond 10.2Gbps of
bandwidth will not be passed through this device resulting in a blank screen.


Produkt Specifikationer

Mærke: Blustream
Kategori: AV forlænger
Model: HEX11WP-TX

Har du brug for hjælp?

Hvis du har brug for hjælp til Blustream HEX11WP-TX stil et spørgsmål nedenfor, og andre brugere vil svare dig