Boston Acoustics KIT-ST-35 Manual

Boston Acoustics Guitarforstærker KIT-ST-35

Læs gratis den danske manual til Boston Acoustics KIT-ST-35 (2 sider) i kategorien Guitarforstærker. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Boston Acoustics KIT-ST-35, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

KIT-ST-35

Tools needed

Small Phillips screwdriver

Big Phillips screwdriver

Soldering iron and solder

Wrench

Hammer

The most all-round electric guitar for you to build yourself. The high quality ash body,

maple neck with its pau ferro ngerboard are the ingredients for a classic electric guitar

sound. The three single coil pickups will amplify the sound to suit your taste. Of course this

kit contains the traditional tremolo. The neck is already equipped with frets and neck and

the body is already aligned. All parts are included in the package such as pickups, screws,

potentiometers, switches, tuners and strings. Furthermore you can of course enjoy them

with paint and/or specify the colour or gloss you want. If you wish to continue viewing the

wood grain, then the clear coat is an excellent choice to emphasize the grain of the wood.

The DIY guitar Boston is a fun, easy and creative way to create your own unique guitar. The

headstock is a so called half-paddle head, a blank canvas ready to be formed to your own

ideas!

body : ash

neck : USA maple

ngerboard : pau ferro

bridge : traditional tremolo

pickups : 3 x single coil

hardware : chrome

Wood

First shape the headstock to your liking. Use les or saws and sanding paper to make your

headstock design neat and tidy. Make sure you remove all saw and sanding marks. This will

be your signature on this guitar, take your time!

Sanding and nishing

Take the loaded pickguard o your guitar. Sand the body and neck with 320 grit dry

sanding paper. After this step, use masking tape to guard those parts that you don’t want

to colour/nish. Always follow the instructions on your nishing product, be it staining,

spraying with aerosol cans or nishing in a spraying booth. After the body and neck have

been nished in the colour and gloss of your choice, and you have polished your guitar to

the desired result, it’s time to t the neck to the body.

The base of each guitar is the wood construction. The neck pocket in our kits is perfect.

There is no need to work the neck pocket other than maybe a simple sanding. Slide the

neck into the pocket and take the neckplate and the four big screws to fasten the neck.

Electronics

The pickguard of your ST-35 has been prepared already. You only need to thread the

output wires to the appropriate cavity and solder them to the output. Solder a ground wire

to the top of a potentiometer and lead that cable into the vibrato cavity. Now you solder

this to the spring claw. This is necessary to prevent earth humming. Take the jack plate and

fasten the output to the jack plate. Now screw this into the body.

Hardware

Install the machine heads. Don’t forget the washers. Before drilling or punching a hole to

secure the machine heads, please align the machine heads on the back, so it looks neat

and tidy. Now fasten all screws and nuts. A loose washer or nut can cause unwanted reso-

nance.

If wanted, you can install the two string retainers to keep the strings under the correct

angle at the nut.

Installing the tremolo unit. First you secure the spring claw into the body. Now take the

tremolo unit and screw it into the body. Please make sure that you leave the screws out a

little bit for the unit to move. Turn the guitar around and t the tremolo springs to the

tremolo block and the tremolo claw.

Put the strings on and start tuning the guitar.

Now the guitar needs a set up. Once tuned to pitch, check the neck curve and adjust to

your preference with the trussrod key. Check the frets for level. If the frets are not level

enough to your liking, level and polish the frets. Now adjust the string height so the guitar

plays comfortably all over the neck and there is no string buzz. The string height at the

tremolo unit is set using the supplied small Allen wrench. The string height at the nut is set

by ling the string slots to the desired height.

Finish setting up with adjusting the intonation. Now you are ready. You have built your

ST-35 ! Have fun playing it!

Produkt Specifikationer

Mærke:	Boston Acoustics
Kategori:	Guitarforstærker
Model:	KIT-ST-35

Har du brug for hjælp?

Hvis du har brug for hjælp til Boston Acoustics KIT-ST-35 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Guitarforstærker Boston Acoustics Manualer

Boston Acoustics KIT-TE-45 Manual

5 Januar 2026

Boston Acoustics KIT-FV-15 Manual

3 Januar 2026

Boston Acoustics KIT-LP-45 Manual

2 Januar 2026

Boston Acoustics KIT-JB-15 Manual

2 Januar 2026

Boston Acoustics KIT-ST-35 Manual

2 Januar 2026

Boston Acoustics KIT-LP-15 Manual

2 Januar 2026

Guitarforstærker Manualer

Nyeste Guitarforstærker Manualer

Electro Harmonix Abrams 100 Manual

28 December 2025

Blackstar HT-1R MkII Manual

20 Oktober 2025

Blackstar Unity 250 Manual

19 Oktober 2025

Victory V4 The Kraken Manual

15 Oktober 2025

Electro Harmonix Crayon Manual

6 Oktober 2025

Electro Harmonix Battalion Manual

6 Oktober 2025

Electro Harmonix Signal Pad Manual

6 Oktober 2025

Electro Harmonix Analogizer Manual

6 Oktober 2025

Electro Harmonix Muff Overdrive Manual

6 Oktober 2025

Electro Harmonix Stereo Clone Theory Manual

5 Oktober 2025