Boston Acoustics KIT-TE-45 Manual

Boston Acoustics Guitarforstærker KIT-TE-45

Læs gratis den danske manual til Boston Acoustics KIT-TE-45 (3 sider) i kategorien Guitarforstærker. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Boston Acoustics KIT-TE-45, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

KIT-TE-45

Tools needed

Small Phillips screwdriver

Big Phillips screwdriver

Soldering iron and solder

Wrench

Hammer

This model is used on more recordings than any other electric guitar. The direct and versa-

tile sound is yours after you have built this TE-45 kit. The mahogany body has a beautiful

ash veneer on top. The top has a luxurious dark ABS binding. The t of the maple neck with

pau ferro ngerboard is perfect. All ingredients for hours of inspiration. The neck is already

tted with frets and the neck and body are already aligned. All parts are included in the

package such as pickups, screws, potentiometers, switches, tuners and strings. Further-

more you can of course enjoy them with paint and/or specify the colour or gloss you want.

If you wish to continue viewing the wood grain, then the clear coat is an excellent choice to

emphasize the grain of the wood. The DIY guitar Boston is a fun, easy and creative way to

create your own unique guitar. The headstock is a so called half-paddle head, a blank

canvas ready to be formed to your own ideas!

body : mahogany with ash veneer top

neck : USA maple

ngerboard : pau ferro

pickups : 2 x single coil

hardware : chrome

Wood

First shape the headstock to your liking. Use les or saws and sanding paper to make your

headstock design neat and tidy. Make sure you remove all saw and sanding marks. This will

be your signature on this guitar, take your time!

Sanding and nishing

Take the loaded pickguard o your guitar. Sand the body and neck with 320 grit dry

sanding paper. After this step, use masking tape to guard those parts that you don’t want

to colour/nish. Always follow the instructions on your nishing product, be it staining,

spraying with aerosol cans or nishing in a spraying booth. After the body and neck have

been nished in the colour and gloss of your choice, and you have polished your guitar to

the desired result, it’s time to t the neck to the body.

The base of each guitar is the wood construction. The neck pocket in our kits is perfect.

There is no need to work the neck pocket other than maybe a simple sanding. Slide the

neck into the pocket and take the neckplate and the four big screws to fasten the neck.

Electronics

The pickguard of your TE-45 has been t with the neck pickup already. You only need to

thread the output wires to the appropriate cavity and solder them to the appropriate spot

on the switch. Now solder an earth wire to the top of the volume potentiometer and

thread that wire into the channel that leads to the spot underneath the bridge. This is an

earth connection to prevent earth hum. Remove some of the plastic insulation so the wire

is metal to metal with the bridge.

The bridge pickup has been xed to the bridge plate already. Thread that pickup’s wires to

the electronic cavity and solder to the switch. Install the bridge. The three screw holes are

already predrilled into the body. Solder both output wires (live and earth) to the output

chassis.

Check if both pickups and both the volume control and tone control work accordingly. If

everything works, you can close the electronic cavity and output cavity.

Hardware

Install the machine heads. Don’t forget the washers. Before drilling or punching a hole to

secure the machine heads, please align the machine heads on the back, so it looks neat

and tidy. Now fasten all screws and nuts. A loose washer or nut can cause unwanted reso-

nance.

If wanted, you can install the string retainer to keep the strings under the correct angle at

the nut.

Put the strings on and start tuning the guitar.

Now the guitar needs a set up. Once tuned to pitch, check the neck curve and adjust to

your preference with the trussrod key. Check the frets for level. If the frets are not level

enough to your liking, level and polish the frets. Now adjust the string height so the guitar

plays comfortably all over the neck and there is no string buzz. The string height at the

tremolo unit is set using the supplied small Allen wrench. The string height at the nut is set

by ling the string slots to the desired height.

Finish setting up with adjusting the intonation. Now you are ready. You have built your

TE-45 ! Have fun playing it!

Produkt Specifikationer

Mærke:	Boston Acoustics
Kategori:	Guitarforstærker
Model:	KIT-TE-45

Har du brug for hjælp?

Hvis du har brug for hjælp til Boston Acoustics KIT-TE-45 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Guitarforstærker Boston Acoustics Manualer

Boston Acoustics KIT-TE-45 Manual

5 Januar 2026

Boston Acoustics KIT-FV-15 Manual

3 Januar 2026

Boston Acoustics KIT-LP-45 Manual

2 Januar 2026

Boston Acoustics KIT-JB-15 Manual

2 Januar 2026

Boston Acoustics KIT-ST-35 Manual

2 Januar 2026

Boston Acoustics KIT-LP-15 Manual

2 Januar 2026

Guitarforstærker Manualer

Nyeste Guitarforstærker Manualer

Electro Harmonix Abrams 100 Manual

28 December 2025

Blackstar HT-1R MkII Manual

20 Oktober 2025

Blackstar Unity 250 Manual

19 Oktober 2025

Victory V4 The Kraken Manual

15 Oktober 2025

Electro Harmonix Crayon Manual

6 Oktober 2025

Electro Harmonix Battalion Manual

6 Oktober 2025

Electro Harmonix Signal Pad Manual

6 Oktober 2025

Electro Harmonix Analogizer Manual

6 Oktober 2025

Electro Harmonix Muff Overdrive Manual

6 Oktober 2025

Electro Harmonix Stereo Clone Theory Manual

5 Oktober 2025