Celly TRAINERBEAT Manual

Celly Smartwatch TRAINERBEAT

Læs gratis den danske manual til Celly TRAINERBEAT (23 sider) i kategorien Smartwatch. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Celly TRAINERBEAT, eller vil du spørge andre brugere om produktet?

Side 1/23
Please read this manual and
pay attention to the safety
warnings before using the
product
Keep the manual to have the possibility
to consult it at a later time, or in case of
passing the product to a third party.
Esprinet S.p.A. can not in any way be
held responsible for injury or damage
improper use of the product.
e results of the functions offered are
for reference only, cannot be used to
determine the actual condition of the
human body, cannot be used for medical
testing purposes, not as a judgment on
the health of the body.
System and hardware requirement:
Android 4.4 or later / IOS 8.0 or later
Preparation:
the product must be activated by fully
charging it before first use. Press and
hold the power button. Next, be sure to
keep the device suciently charged.
Hook the connector to the body of the
product and insert into the USB port of a
charger to activate it (be careful to insert
it correctly and use the correct current).
Connection:
Verify that your phone meets the above
requirements.
Download the APP to connect.
Please search "FitPro" APP in the App
Store or Android store to scan the
following QR CODE
It is specified that the data controller
of personal data collected through the
App is FitPro by Shenzhen Jusheng
Intelligent Technology Co., Ltd.
Association:
Make sure your smartphone's wireless
functionality is turned on and open the
FitPro app.
Search and select T-BEAT and pair your
device.
Usage:
Once the device connects to the app, it
will synchronize the time. It will record
and analyze your activities, heart rate
and blood pressure.
Touch key - Press and hold the touch key:
switch interface - Single touch of the
touch key: enter
Bracelet functions: Time -> Pedometer
mode -> Trip distance mode -> Calorie
mode -> Heart rate mode -> Blood
pressure mode -> Oxygen saturation
mode -> Remote camera -> Messages
e device is waterproof but not
suitable for immersion in water.
Functions:
1. Time mode: display time, battery, date.
Press and hold the touch key to switch
between available interfaces
2. Pedometer: Automatically record the
number of steps
3. Distance traveled: automatically
records the distance traveled
4. Calories Mode: Displays calories
burned
5. Heart Rate Monitor: e device will
measure your heart rate. You can also
manually measure your heart rate via
APP. e page will display the most
recent measurement data.
6. Blood Pressure Monitor: e device
will measure your current blood pressure
situation. e page will show the latest
measurement data (measurement time is
about 20 seconds.
7. Oxygen Saturation Monitor: e
device will measure your blood oxygen
saturation levels. You can also manually
measure your oxygen saturation via APP.
e page will display the most recent
measurement data.
8. Sleep Monitor: Automatically
recognize your status and track your
entire sleep progress with analysis of
deep sleep and light sleep hours.
9. Call notifications: the bracelet will
vibrate when the phone rings.
10. Message notifications: the bracelet
will vibrate when the phone receives text
messages.
11. Weather forecast: the product is
able to promptly provide the weather
conditions of the place where you are.
12. Music control: Once you activate
music on your device, you can control and
manage songs from your smartwatch.
Questions and answers:
1. Can't find your device when pairing
your device?
(1) Make sure the wireless function is
turned on.
(2) Make sure the distance between your
phone and the device is no more than
0.5m.
(3) Make sure the device is charged. If
the problem persists after fully charged,
please contact us.
2. Can't connect the device with the app?
Restart your wireless or smartphone for
device pairing
3. e APP shows no data? Make sure
the battery is charged and the wireless
feature is turned on.
4. Wrong time? If the bracelet is low
power, the time may be wrong. Please
charge the bracelet and connect the
phone again.
If you wear a pacemaker or other
implanted electronic device, consult your
doctor before using the bracelet for the
following functions: heart rate, blood
pressure and oxygen saturation. e
optical sensor of the clock lights up green
and ashes. If you suffer from epilepsy
or are sensitive to ashing light sources,
please consult your doctor if you can
wear this product. e device tracks your
daily activities using sensors. is data
is meant to track your daily activities,
saturation, blood pressure, and calories,
but it may not be completely accurate.
e device, accessories, tracking sensors
and other relevant data are designed
for entertainment and fitness purposes,
not for medical purposes. ey are not
applicable to the diagnosis, monitoring,
treatment, or prevention of disease
or symptoms. e heart rate, blood
pressure and oxygen saturation data
are for reference only. We are not
by any data deviation.
Cleaning:
Do not use solvents, corrosive or
gaseous cleaners.
Safety Standards:
THE PRODUCT IS NOT SUITABLE FOR
IMMERSION IN WATER OR OTHER
LIQUIDS.
FitPro will act as the Data Controller
of personal data collected through
the use of the product. Esprinet SpA
will not have any access to personal
data and therefore Shenzhen Jusheng
Intelligent Technology Co., Ltd. will be
solely responsible for compliance with
the protection of personal data towards
users.
Do not touch the product or its
accessories with wet or damp hands
or other parts of the body. To prevent
malfunction or damage to the product
and/or battery or reduce its life, cause
overheating, fire, avoid accidental drops,
do not crush, puncture or exert a high
level of pressure on the product. Keep
away from moisture, water or other
liquids.
If the product comes into contact
with water, moisture or other liquids,
do not use it to avoid electric shock
or damage. Keep the device dry and
away from moisture. Do not store or
expose the product to heat sources,
open ames, direct sunlight, radiators,
stoves, cooking appliances that are in
operation or otherwise hot, or other heat
sources such as the dashboard of your
car in summer. Never use the product
when moving from a cold to a warm
environment. Any condensation could
damage the product. Allow the product
to reach room temperature before
plugging it in and using it again. is
could take several hours. Do not place
the product in excessively hot or cold
environments, as extreme temperatures
may damage the device and reduce the
charging capacity and life of the device
and battery. Do not use the product if
it is damaged, emits smoke or smells
of burning. Do not wear the product
if it is overheated, it could cause skin
lesions. Some people may experience
allergic skin reactions to plastics, leather,
fibers and other materials resulting in
symptoms such as redness, swelling
and inammation after contact with
these components. If allergic reactions
should occur after wearing the device,
remove it immediately and consult your
doctor. Wear the device neither too
tight nor too loose, and leave enough
room for your skin to breathe. is way,
it will be comfortable on your wrist.
Disconnect all connected cables before
starting cleaning. Do not immerse the
product in water or other liquids. Do not
attempt to modify, repair or disassemble
the product. ere are no serviceable
parts inside the product. Never open
or disassemble it. Do not attempt to
disassemble and/or replace the battery.
Any changes or modifications to your
device could void the manufacturer's
warranty. Do not allow children or
people with disabilities to use electrical
products without supervision. Do not
allow children or pets to bite or swallow
the product or its accessories, as this
may cause serious injury. e radio waves
generated by the product may affect the
normal functioning of implanted medical
devices or personal medical devices
such as pacemakers and hearing aids.
If you use such devices, consult your
physician before using this product. Do
not use or store your device in areas
with high concentrations of dust or
airborne materials as they may cause
your device to malfunction. On aircraft,
ships and other means of transport,
the use of electronic devices could
interfere with electronic navigational
instruments. Comply with the provisions
of the transport service provider. Turn
off the device in potentially explosive
environments, such as gas stations
or near fuel. Do not store your device
near magnetic fields. Don't hold the
screen too close to your eyes. If you
experience discomfort, such as muscle
spasms, or become disoriented, stop
using the device immediately and
consult a physician. To avoid eye strain,
take frequent breaks when using the
device. Damage or poor performance
due to failure to follow the above
warnings and instructions may void
the product's warranty. Esprinet is not
responsible for performance problems or
incompatibilities caused by unauthorized
modification of system settings or
software.
Specifications:
Inputs: DC 5V/1A
Charging time: 4 hours
Battery life: 5 days
Battery type: Li-Polymer, 150mah/3.7V
(0.555Wh)
Software: PHY6222
Apps: FitPro
Frequency: 2.408-2.480GHz
Maximum radiated power: <20mW
Weight: 27.2g
Bracelet size: 24.5*4.5*0.7cm
Package content: Fitness tracker, user
manual and colored strap
User information for correct
disposal (Directive 2013/56/EU)
e crossed-out wheeled bin
symbol shown on the equipment or
on its packaging indicates that the
product at the end of its useful life,
including the non-removable battery,
must be collected separately from other
waste to allow proper treatment and
recycling. e safe use of this product
is guaranteed in compliance with the
following instructions, therefore it is
necessary to keep them and follow
them scrupulously throughout the life
of the product. e product does not
require technical maintenance, NEVER
DISASSEMBLE IT. e battery inside is
integrated and not replaceable. Do not
attempt to remove the built-in Li-ion/
Polymer battery yourself as it may cause
overheating, fire and injury. e battery
should only be removed by independent
qualified professionals who can safely
remove and dispose of it in accordance
with applicable laws. e user must
therefore deliver the equipment that
has reached the end of its life free of
charge to the appropriate municipal
centers for separate collection of
electrical and electronic waste, or return
it to the retailer, one by one, or free of
charge for devices with smaller external
dimensions. at 25cm. Adequate separate
collection for the subsequent sending
of the decommissioned equipment to
environmentally compatible recycling,
treatment and disposal helps to
avoid possible negative effects on the
environment and health and promotes
the reuse and/or recycling of the
materials it is made of the equipment.
Illegal disposal of equipment, batteries
and accumulators by the user involves
the application of the sanctions referred
to in current legislation.
is product complies with
RoHS directive 2011/65/EU
– 2015/863/EU. e Product
has the CE mark and therefore complies
with the safety standards established by
the European Union.
Esprinet SpA declares that the product
complies with directive 2014/53/EU. e
complete text of the EU declaration of
conformity is available at the following
Internet address: www.celly.com/
exchange/CELLY-SPA/Dichiarazioni_di_
conformita/TRAINERBEAT/DOC.pdf
Celly® is a trademark owned by Esprinet
S.p.A.
All brands are registered trademarks of
their respective owners.
Esprinet S.p.A., via Energy
Park 20, 20871 Vimercate
(MB) - Italy
Made in China.
User manual
FITNESS BRACELET
MODEL: : TRAINERBEAT
Rev00 - 08.2024
EN


Produkt Specifikationer

Mærke: Celly
Kategori: Smartwatch
Model: TRAINERBEAT
Kode for international beskyttelse (IP): IP67
Bredde: 245 mm
Dybde: 45 mm
Vægt: 27.2 g
Brugervejledning: Ja
Opladningstid: 4 t
Batterikapacitet: - mAh
Skærm diagonal: - "
Skærmopløsning: - pixel
Wi-Fi: Ingen
Bluetooth: Ja
USB-port: Ja
FM radio: Ja
Batteriteknologi: Lithium polymer (LiPo)
Markedspositionering: SmartWatch
Armbånd, materiale: Silikone
Near Field Communication (NFC): Ingen
Batterilevetid: 5 dage
Indbygget kamera: Ingen
Batterilevetid (maks.): - t
Batteritype: Indbygget batteri
Understøttede mobile operativsystemer: Android 7.1, Android 7.1.2, Android 10, Android 8.0, Android 10.0, Android 8.1, Android 11.0, Android 9.0, Android 12.0, Android 13.0, iOS 8.0, iOS 8.1, iOS 8.2, iOS 8.3, iOS 8.4, iOS 10.0, iOS 8.8, iOS 11.0, iOS 9.0, iOS 11.4, iOS 9.1, iOS 12, iOS 9.2, iOS 13, iOS 9.3, Android 4.4, iOS 13.4, Android 5.0, iOS 14, Android 5.1, iOS 14.5, Android 6.0, iOS 15, Android 7.0, iOS 16
GPS (satellit): Ingen
Mobil netværksforbindelse: Ingen
Tilslutning af hovedtelefoner: Nej
Urkassens størrelse: - mm
Urkassens farve: Sort
Bånd, farve: Sort
Form: Rektangulær
Lukketype: Enkelt spænde stroppespænde
Aftagelig rem: Ja
Pulsmåler: Ja
Blodtryksmonitor: Ja
Blodiltsensor: Ja
Kørt distance: Ja
Kalorieforbrænding: Ja
Skridttæller: Ja
Aktivitetstracker: Ja
Søvnkvalitet: Ja
Musikkontrol: Ja
Tykkelse: 7 mm
SMS meddelelser: Ja
Ladespænding: 5 V
Opkaldsmeddelelser: Ja
Spænde farve: Sort
Understøttede applikationer: FitPro
Fjernbilledtagning: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Celly TRAINERBEAT stil et spørgsmål nedenfor, og andre brugere vil svare dig




Smartwatch Celly Manualer

Smartwatch Manualer

Nyeste Smartwatch Manualer

Denver

Denver SWG-345 Manual

31 Oktober 2025
Nilox

Nilox NXSWONAIR Manual

30 Oktober 2025
Bauhn

Bauhn AFTWS-0825 Manual

8 Oktober 2025
Honor

Honor Band 10 Manual

4 Oktober 2025
Suunto

Suunto Race 2 Manual

3 Oktober 2025
Realme

Realme Watch S Manual

3 Oktober 2025
Garmin

Garmin HRM 200 Manual

2 Oktober 2025
SuperSonic

SuperSonic SC-61SW Manual

1 Oktober 2025