Chapin 19099 Manual

Chapin Ikke kategoriseret 19099

Læs gratis den danske manual til Chapin 19099 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Chapin 19099, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

6. Lock Off

For safety lock-off feature (no-spraying), push

trigger forward and rotate locking mechanism

into lock-off positionas shown in ﬁg. 6A.

7. To Use Special Valve to Pressurize Sprayer

SET COMPRESSOR REGULATOR AT 50 PSI.

To pressurize sprayer by using the special valve ﬁrst remove plastic

cap from the tire valve stem. Pressurize the sprayer by using a

standard air chuck connected to an air compressor as you would

inﬂating a tire on a car. After pressurizing the sprayer replace

plastic cap on the tire valve to avoid getting dirt in the valve.

8. To Release Pressure

1) Do: To release pressure in the sprayer just pull the ring on the

relief valve until all pressure is released from the sprayer.

2) Do: Stay away from the sprayer until all air has escaped.

9. Care, Storage and Maintenance

1) Do: Follow chemical manufacture’s instructions for cleaning. Rinse thoroughly with recommended solvent.

Follow Filling, Pressurizing and Spraying Instructions, except pump unit only 8-10 strokes. Be sure that the

wand and nozzle are thoroughly rinsed after each use.

2) Do: Open shut-off and allow recommended solvent to run through discharge assembly.

3) Do: Release pressure (Follow Pressure Release Instructions), remove pump and empty sprayer.

4) Do: Store sprayer tank upside down, with pump removed, in a warm dry location.

5) Do: Periodically oil pump by dropping 10-12 drops of light oil down pump rod through opening in cover.

6-8135

Dripless Shut-off

Cierre antigoteo

Arrêt anti-goutte

5. Pressurizing and Spraying, continued

5A5A

5C5C

Lock

Position

5B5B

TO RELEASE HANDLE:

Push down to depress

coil spring and turn

handle counterclock-

wise 1/4 turn, then lift

handle.

TO UNLOCK PUMP: Turn

handle counterclockwise

until 3-prong clamp is

loose. Then rotate clamp

counterclockwise to

stop and lift out.

5D5D 5E

5E5E

Pump until you feel

resistance.

5F5F

7A7A

8A8A

Metal

Rod

Brass Extension

Brass

Extension Nut

Nozzle

Adapter

Nozzle

Metal Rod

Valve Seat

Nozzle Adapter

Nozzle

2B 2C

6-8136

Valve Kit

Kit de la válvula

Ensemble de soupape

6-8301

.8 GPM Nozzle Assembly

Conjunto de boquilla de .8 GPM

Assemblage de buse .8 GPM

017670 (A) R0421

6-6092

Hose Black

Manguera para trabajos pesados Negro

Tuyau pour service intense Noir

6-4646

Repair Parts Kit Gaskets and Seals (not included)

Juego de piezas de reparación, empaquetaduras y juntas (no incluido)

Kit de pièces de réparation, joints et garniture d’étanchéité (non inclus)

Sk-1154-1

WARNING: Improper use or failure to follow instructions can result in explosive failure causing serious

eye or other injury. For safe use of this product you must read and follow all instructions. Do not leave

a pressurized sprayer in the hot sun. Heat can cause pressure build-up resulting in possible explosion.

Do not store or leave solution in tank after use. Always wear goggles, gloves, long sleeve shirt, long pants

and full foot protection when spraying. Never use any tool to remove pump if there is pressure in sprayer.

Never stand with face or body over top of tank when pumping or loosening pump to prevent ejecting pump

assembly and/or solution from striking and injuring you. Never pressurize sprayer by any means other than

the original pump. Do not attempt to modify this sprayer. Replace parts only with manufacturer’s original

parts. Never spray ﬂammable, caustic, acidic, chlorine, bleach or other corrosive solutions or heat,

pressure, or gas producing chemicals. Always read and follow chemical manufacturer’s instructions

before use with this sprayer as some chemicals may be hazardous when used with this sprayer.

WARNING

Note: Your particular sprayer may not include all parts pictured above.

Nota: Es posible que este pulverizador en particular no incluya todas las partes que se ilustran arriba.

Remarque : Votre pulvérisateur particulier pourrait ne pas inclure toutes les pièces illustrées plus haut.

Parts, Piezas, Pièces

Congratulations!

You have just purchased a quality Chapin product.

Call us @ 1-800-950-4458 or www.chapinmfg.com

6-5373

Holster

Funda

Étui

19099

2. Extension wand and Nozzle Assembly

To attach nozzle directly to shut-off, unthread brass extension nut and metal rod. Assemble valve

seat (included), nozzle adapter and nozzle to the shut-off as shown in ﬁgure 2C. Note orientation of

valve seat. It will leak if assembled incorrectly.

Metal Rod

Shut-off to wand to nozzle assembly

Shut-off to nozzle assembly

The dripless shut-off comes

assembled as shown in ﬁgure 2A.

1. Hose to Tank

3. Pre-Use Check

1) Do: Check tightness of hose nut to be sure hose is securely attached to the tank outlet.

2) Do: Inspect hose for deterioration, cracks, softness, or brittleness. If any of these conditions are found, replace

hose before using. Replace with original manufacturer’s parts only.

3) Do: Remove pump (see Filling, Pressurizing and Spraying Instructions), inspect interior and exterior of tank for

signs of deterioration of body and bottom. Any sign of deterioration indicates possible tank weakening and

could result in explosive bursting under pressure. If any of these signs are found, discard tank immediately and

replace. Do not attempt to patch leaks, etc., as this could result in serious injury.

4) Do: Follow Filling, Pressurizing and Spraying Instructions, except use water only (Pump plunger 10-20 strokes

and inspect for leaks).

5) Do: Direct shut-off away from you and open to make sure discharge is not clogged.

6) Do: If unit passes this test, release pressure (see Pressure Releasing Instructions), empty tank, and proceed

with Filling, Pressurizing and Spraying Instructions.

7) Do: Inspect all metal parts including the wand, nozzle and ﬁttings for rust, corrosion and pitting. If any of these

conditions are found, replace affected part with original manufacturer’s part before using.

4. Filling

1) Do: Turn pump handle counterclockwise and remove pump

2) Do: Prepare spray solution following all directions and safety warnings on chemical label.

3) Do: Fill tank to no more than the proper gallon marker. Do NOT: over ﬁll to accommodate pump.

4) Do: Check pump to make sure that no grass or dirt is stuck to barrel. Replace pump in tank and tighten securely.

TO LOCK PUMP: Place

pump prongs down into

slots in funnel, turn clamp

clockwise to furthest

position under bottom slot,

then turn handle clockwise

until tightly locked and

sealed in place.

6A6A

Lock

Trigger

TO LOCK HANDLE: Push handle down

to depress coil spring and turn handle

1/4 turn clockwise, then allow handle to

raise into lock position.

P.O. Box 549 700 Ellicott St.

Batavia, NY 14021-0549 U.S.A.

1-800-950-4458 www.chapinmfg.com

5. Pressurizing and Spraying

FOR HELP USING TRI-LOCK PUMP SEE VIDEO

https://chapinmfg.com/pages/industrial-videos

Attach the hose by screwing the swivel

nut clockwise and tightening to 37 in. lbs.

Refer to Pre-use check before using.

Produkt Specifikationer

Mærke:	Chapin
Kategori:	Ikke kategoriseret
Model:	19099

Har du brug for hjælp?

Hvis du har brug for hjælp til Chapin 19099 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Chapin Manualer

17 September 2025

27 August 2025

27 August 2025

26 August 2025

26 August 2025

22 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ANCEL BM200 PRO Manual

3 November 2025

Ikea SPRETGRÄS 805.895.76 Manual

3 November 2025

ANCEL BM200 Manual

3 November 2025

JSAUX SP0210 Manual

3 November 2025

EtherWAN SmartE Manual

3 November 2025

Hikvision DS-TMG022 Manual

3 November 2025

Hendi 229583 Manual

3 November 2025

Witt HP 18 Manual

3 November 2025

Physa PHY-WU_03 Manual

3 November 2025

Beverage-Air Cross Temp CT2HC-1G Manual

3 November 2025