Chapin 19149 Manual

Chapin Ikke kategoriseret 19149

Læs gratis den danske manual til Chapin 19149 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Chapin 19149, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

017659 (A) R0421

2. Extension wand and Nozzle Assembly

6-8136

Valve Kit

Kit de la válvula

Ensemble de soupape

6-8135

Dripless Shut-off

Cierre antigoteo

Arrêt anti-goutte

To attach nozzle directly to shut-off, unthread brass extension nut and metal rod. Assemble

valve seat (included), nozzle adapter and nozzle to the shut-off as shown in ﬁgure 2C. Note

orientation of valve seat. It will leak if assembled incorrectly.

6-6091

Hose Brown

Manguera

Castaño

Tuyau Bru

6-5943

Nozzle 1.0 GPM

Tobera

Buse

6-5797

Nozzle .5GPM

Tobera

Buse

6-6092

Hose Black

Manguera para trabajos

pesados Negro

Tuyau pour service

intense Noir

Metal

Rod

Brass Extension

Brass

Extension Nut

Metal Rod

Nozzle

Adapter

Shut-off to wand to nozzle assembly

Nozzle

Shut-off to nozzle assembly

Metal Rod

Valve Seat

Nozzle Adapter

Nozzle

2B 2C

The dripless shut-off comes assembled

as shown in ﬁgure 2A.

6-4629

Repair Parts Kit Gaskets and Seals (not included)

Juego de piezas de reparación, empaquetaduras y juntas (no incluido)

Kit de pièces de réparation, joints et garniture d’étanchéité (non inclus)

Sk-1154-1

WARNING: Improper use or failure to follow instructions can result in explosive failure causing serious

eye or other injury. For safe use of this product you must read and follow all instructions. Do not leave

a pressurized sprayer in the hot sun. Heat can cause pressure build-up resulting in possible explosion.

Do not store or leave solution in tank after use. Always wear goggles, gloves, long sleeve shirt, long pants

and full foot protection when spraying. Never use any tool to remove pump if there is pressure in sprayer.

Never stand with face or body over top of tank when pumping or loosening pump to prevent ejecting pump

assembly and/or solution from striking and injuring you. Never pressurize sprayer by any means other than

the original pump. Do not attempt to modify this sprayer. Replace parts only with manufacturer’s original

parts. Never spray ﬂammable, caustic, acidic, chlorine, bleach or other corrosive solutions or heat,

pressure, or gas producing chemicals. Always read and follow chemical manufacturer’s instructions

before use with this sprayer as some chemicals may be hazardous when used with this sprayer.

WARNING

Note: Your particular sprayer may not include all parts pictured above.

Nota: Es posible que este pulverizador en particular no incluya todas las partes que se ilustran arriba.

Remarque : Votre pulvérisateur particulier pourrait ne pas inclure toutes les pièces illustrées plus haut.

Parts, Piezas, Pièces

Congratulations!

You have just purchased a quality Chapin product.

Call us @ 1-800-950-4458 or www.chapinmfg.com

6-5373

Holster

Funda

Étui

P.O. Box 549 700 Ellicott St.

Batavia, NY 14021-0549 U.S.A.

1-800-950-4458 www.chapinmfg.com

5A5A

Lock

Position

5B5B

TO LOCK HANDLE: Push handle down to depress

coil spring and turn handle 1/4 turn clockwise,

then allow handle to raise into lock position.

5. Pressurizing and Spraying1. Hose to Tank

5C5C

TO RELEASE HANDLE:

Push down to depress

coil spring and turn

handle counterclock-

wise 1/4 turn, then lift

handle.

Pump until you feel

resistance.

TO UNLOCK PUMP: Turn

handle counterclockwise

until 3-prong clamp is

loose. Then rotate clamp

counterclockwise to

stop and lift out.

5D5D 5E

5E5E 5F

5F5F

TO LOCK PUMP: Place pump prongs down into

slots in funnel, turn clamp clockwise to furthest

position under bottom slot, then turn handle

clockwise until tightly locked and sealed in place.

FOR HELP USING TRI-LOCK PUMP SEE VIDEO

https://chapinmfg.com/pages/industrial-videos

6. Lock Off

For safety lock-off feature (no-spraying), push

trigger forward and rotate locking mechanism

into lock-off positionas shown in ﬁg. 6A.

7. To Release Pressure

1) With pump facing away, turn locked handle counterclockwise until air begins to escape. Do:

Stop turning handle when you hear air escaping.

2) Do: Stay away from the sprayer until all air has escaped.

8. Care, Storage and Maintenance

1) Do: Follow chemical manufacture’s instructions for cleaning. Rinse thoroughly with recommended solvent.

Follow Filling, Pressurizing and Spraying Instructions, except pump unit only 8-10 strokes. Be sure that the

wand and nozzle are thoroughly rinsed after each use.

2) Do: Open shut-off and allow recommended solvent to run through discharge assembly.

3) Do: Release pressure (Follow Pressure Release Instructions), remove pump and empty sprayer.

4) Do: Store sprayer tank upside down, with pump removed, in a warm dry location.

5) Do: Periodically oil pump by dropping 10-12 drops of light oil down pump rod through opening in cover.

6A6A

Lock

Trigger

3. Pre-Use Check

1) Do: Check tightness of hose nut to be sure hose is securely attached to the tank outlet.

2) Do: Inspect hose for deterioration, cracks, softness, or brittleness. If any of these conditions are

found, replace hose before using. Replace with original manufacturer’s parts only.

3) Do: Remove pump (see Filling, Pressurizing and Spraying Instructions), inspect interior and

exterior of tank for signs of deterioration of body and bottom. Any sign of deterioration indicates

possible tank weakening and could result in explosive bursting under pressure. If any of these

signs are found, discard tank immediately and replace. Do not attempt to patch leaks, etc., as

this could result in serious injury.

4) Do: Follow Filling, Pressurizing and Spraying Instructions, except use water only

(Pump plunger 10-20 strokes and inspect for leaks).

5) Do: Direct shut-off away from you and open to make sure discharge is not clogged.

6) Do: If unit passes this test, release pressure (see Pressure Releasing Instructions), empty tank,

and proceed with Filling, Pressurizing and Spraying Instructions.

7) Do: Inspect all metal parts including the wand, nozzle and ﬁttings for rust, corrosion and pitting.

If any of these conditions are found, replace affected part with original manufacturer’s part

before using.

4. Filling

1) Do: Turn pump handle counterclockwise and remove pump

2) Do: Prepare spray solution following all directions and safety warnings on chemical label.

3) Do: Fill tank to no more than the proper gallon marker. Do NOT: over ﬁll to accommodate pump.

4) Do: Check pump to make sure that no grass or dirt is stuck to barrel. Replace pump in tank and

tighten securely.

Attach the hose by screwing the swivel

nut clockwise and tightening to 37 in. lbs.

Refer to Pre-use check before using.

Produkt Specifikationer

Mærke:	Chapin
Kategori:	Ikke kategoriseret
Model:	19149

Har du brug for hjælp?

Hvis du har brug for hjælp til Chapin 19149 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Chapin Manualer

17 September 2025

27 August 2025

27 August 2025

26 August 2025

26 August 2025

22 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MuxLab 500439 Manual

5 November 2025

GVM BL160-II Manual

5 November 2025

Uniprodo UNI_ROLL_03 2in1 Manual

5 November 2025

Rockville SS6 Manual

5 November 2025

Silk'n VacuPedi FTC04 Manual

5 November 2025

MEPROLIGHT MCO PRO Manual

5 November 2025

XPG Battlecruiser II Manual

5 November 2025

Hosa USQ-110 Manual

5 November 2025

JMAZ Centipede Quadro Manual

5 November 2025

Lake People Mic-Amp F311-D Manual

5 November 2025