Chapin 6-9213 Manual

Chapin Ikke kategoriseret 6-9213

Læs gratis den danske manual til Chapin 6-9213 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Chapin 6-9213, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Chapin International, Inc

P.O. Box 549 700 Ellicott St.

Batavia, NY 14021-0549 U.S.A.

1-800-950-4458 www.chapinmfg.com

2.0 GPM 12V DIAPHRAGM PUMP

Model 6-9213

017630 R0421

Carefully Read These Instructions Before Use

WARNING

INSTRUCTION MANUAL

DO NOT RETURN TO STORE

Call: 1-800-950-4458

www.chapinmfg.com

See website for warranty detail

Instrucon Manual - English

1. Alway choose the dryest location away from any source of heat. If an enclosure is

needed, special instructions for cooling the motor may be necessary. Consult Chapin

Customer service 1-800-950-4458.

2. The pump may be mounted horizontally with the outlet port on the right when viewed

from the pump end or with the pump above the mount, or vertically with the pump above

or below the motor.

3. Keep the pump from extreme high or low (freezing) temperatures while in operation.

Follow a recommended operating ambient temperature of 32˚ F to 115˚ F).

Plumbing:

1. Use suction hose on inlet of pump. Flexible tubing is required with proper pressure

rating. (Minimum of 3/8” I.D.)

2. To prime, ﬁrst relieve all pressure from the outlet port.

3. Install an inline sediment ﬁlter (50 mesh) to keep foreign debris out of the system. If

a check valve is needed, use valve rated with a cracking pressure of no more than 2 PSI

(0.14 bar).

4. Always install tubing to maintain a unincumbered path to avoid crimping. Use 90’ elbow

ﬁttings if necessary.

5. Always mount pump before other components to avoid introducing particles to the

water. This will prevent possible pump damage or failure from foreign debris.

Electrical:

1. This pump is designed for intermittent operation. There should be downtime in between

use. Do not run indeﬁnitely. Consult Chapin Customer service 1-800-950-4458.

2. Always use proper power supply to avoid pump damage or failure.

3. Pump and motor specs are based on an alternator charged battery (13.2 VDC).

4. Use a sufﬁcient battery supply power. Some smaller ATV and lawn tractor batteries

may affect pump performance due to low voltage and amp ratings. Consult battery

manufacturer’s speciﬁcations for proper compatibility.

Mounting:

Mount your pump in an optimal location

Installation Recommendations

Produkt Specifikationer

Mærke:	Chapin
Kategori:	Ikke kategoriseret
Model:	6-9213

Har du brug for hjælp?

Hvis du har brug for hjælp til Chapin 6-9213 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Chapin Manualer

27 August 2025

27 August 2025

26 August 2025

26 August 2025

22 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

QSC RMXa Manual

13 September 2025

Tineco Floor One S2 Series Manual

13 September 2025

Tineco Floor One S3 Breeze Manual

13 September 2025

Tineco Floor One S5 Steam Manual

13 September 2025

Osram VX500-CB Manual

13 September 2025

Zelmer ZTS7990 Manual

13 September 2025

Osram VX250-SP Manual

13 September 2025

Vello CB-800 Manual

13 September 2025

Ibm System Storage ProtecTIER TS7620 Manual

13 September 2025

Ibm System Storage N6250 Manual

13 September 2025