Chapin 81000A Manual


Læs gratis den danske manual til Chapin 81000A (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Chapin 81000A, eller vil du spørge andre brugere om produktet?

Side 1/20
Chapin International, Inc
P.O. Box 549 700 Ellicott St.
Batavia, NY 14021-0549 U.S.A.
1-800-950-4458 www.chapinmfg.com
RESIDENTIAL TURF SPREADER
Model 81000A
80 lb. Spreader
016313 R1220
Carefully Read These Instructions Before Use
WARNING
Use and Care Manual
DO NOT RETURN TO STORE
Call: 1-800-950-4458
www.chapinmfg.com
See website for warranty detail
Suggested Tools:
Wrench and/or Ratchet Set
Approximate assembly time is 5-10 minutes
Assembly Instructions
1E
Chapin Spreader Operators Manual - English
WARNING: IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT
IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.
Do not allow anyone to operate the broadcast spreader without proper instructions. Do not
permit children to operate the broadcast spreader. Wear protective eyewear and gloves when
handling and applying lawn and garden chemicals. Read the chemical label instructions and
warnings for handling and applying the chemicals you plan to spread – application settings
provided are only a guideline.
Auger is designed to work in forward motion. Excessive reverse motion could cause
binding. If resistance is felt while pulling spreader backwards, stop and clear salt
from auger.
WARNING
HANDLE ASSEMBLY
Assemble handle to uprights with Hex bolts and M6 nuts.
Tighten M6 nuts completely.
Note: If you frequently store your spreader with
the handle down, optional thumb screws are
provided for faster disassembling.


Produkt Specifikationer

Mærke: Chapin
Kategori: Ikke kategoriseret
Model: 81000A

Har du brug for hjælp?

Hvis du har brug for hjælp til Chapin 81000A stil et spørgsmål nedenfor, og andre brugere vil svare dig