Chord CM-50 Manual

Chord Ikke kategoriseret CM-50

Læs gratis den danske manual til Chord CM-50 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Chord CM-50, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

CM- 50

Item ref: 174.176 UK

Compressor Pedal

User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

Thank you for choosing a Chord effect pedal to give your instrument a new sound dimension. Please

read below for an explanation of the controls and to get the best results from your new effect.

Each Chord 50-series effect pedal is supplied with a 9V battery, which needs to be connected to the

battery clip inside the underside battery compartment. Carefully remove the plastic cover by squeezing

its clip and levering outwards. Clip back into place once the battery is fitted.

Controls and connections are described below.

The -50 is a compressor pedal that can be set to provide clean sustain and/or control peaks in the CM

guitar signal to keep the tone clean. The main function of the compressor is to reduce gain of a loud

signal and increase the gain of a low signal. This has the effect of reducing the attack (picking) of the

guitar string(s) and then gradually increasing gain as the string sound starts to fade out, making its

sound last longer (i.e. sustain). Th more Sustain that is added can reduce the overall output and so e

the Level control allows this to be corrected or even boosted for clean solos. The Attack control slightly

delays the effect of the compressor to allow picked or strummed notes to have more peak signal at the

start of each phrase, reinstating the attack of the guitar that would otherwise be compression. lost to

Unplug the guitar input jack to preserve the battery when not in use. If the pedal is not being used for

long periods, it is advised to remove the 9V battery. Optional external power can be from a 9Vdc

adaptor, centre-negative polarity with a rating of 100mA or higher recommended.

Optional 9V DC jack power input

Effect on/off indicator

Sustain - adjusts the level of compression applied

6.3mm jack output - to amplifier

Level - adjusts the output level

Attack - adjusts the speed of the compression effect

6.3mm jack input - from guitar

Effect on/off footswitch

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical

or Electronic equipment and should not be disposed with other household or commercial waste

at the end of its useful life. The goods must be disposed of according to your local council guidelines.

Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ

AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland

Produkt Specifikationer

Mærke:	Chord
Kategori:	Ikke kategoriseret
Model:	CM-50

Har du brug for hjælp?

Hvis du har brug for hjælp til Chord CM-50 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Chord Manualer

12 August 2025

11 August 2025

19 Marts 2025

3 Marts 2025

3 Marts 2025

4 September 2024

8 August 2024

30 Juli 2024

8 Marts 2024

30 Juni 2023

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ANCEL BD200 Manual

4 November 2025

Yamazen KSF-S34 Manual

4 November 2025

Hendi CombiTurbo 281277 Manual

4 November 2025

Uniprodo UNI_PBM_58 Manual

4 November 2025

Wimberley AP-603 Manual

4 November 2025

Essentiel B B-Hydro Brush Manual

4 November 2025

Cooler Master Mini 110 Manual

4 November 2025

ANCEL FX3300 ELITE Manual

4 November 2025

WALI AMM002-B Manual

4 November 2025

Eliminator Lighting Electro 64 BLED Manual

4 November 2025