Chord VGW1 Manual
Chord
Ikke kategoriseret
VGW1
Læs gratis den danske manual til Chord VGW1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 66 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 33.5 anmeldelser. Har du et spørgsmål om Chord VGW1, eller vil du spørge andre brugere om produktet?
Side 1/4
VGW1
VHF Guitar Wireless System
Item ref: 171.848UK
User Manual
Version 1.3
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
171.848UK User Manual
Introduction:
Thank you for choosing the Chord F-series wireless system. This professional wireless set provides an instrument VHF VH
radio system for freedom of movement without loss of audio quality. Please read this manual before using this equipment
in order to avoid damage through incorrect operation and to get the best performance from your purchase.
Contents:
Please take care when unpacking this product. Inspect for any damage and ensure you have the following components…
• VHF wireless receiver
• Mains power adapter
• 6.3mm to 3.5mm instrument jack lead
• 6.3mm mono jack lead
• 9V battery, PP3
Warning:
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by qualified
personnel before further use.
Avoid impact or heavy vibration to any of the components.
No user serviceable parts inside transmitter or receiver - refer servicing to qualified service personnel.
Safety
• Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as stated on the
adapter.
• Avoid ingress of water or particles into the transmitter(s) or receiver
• Use alkaline or NiMH batteries in the transmitter(s) and remove if unused for long periods.
• Observe the correct polarity when replacing batteries
Placement
• Keep all components out of direct sunlight and away from heat sources.
• Do not place heavy objects on top of the receiver or transmitter(s)
• If rack-mounting, secure the receiver to a 1U rack tray and do not place heavy equipment above the receiver.
• Keep the transmitter(s) and receiver away from damp or dusty environments.
Cleaning
• Use a soft cloth with a neutral detergent to clean the body of the beltpack transmitter and receiver.
• Lightly damp sterile wipes may be used on the beltpack for hygiene purposes
• To avoid damage, do not use solvents to clean the components
Produkt Specifikationer
| Mærke: | Chord |
| Kategori: | Ikke kategoriseret |
| Model: | VGW1 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Chord VGW1 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Chord Manualer
12 August 2025
11 August 2025
19 Marts 2025
3 Marts 2025
3 Marts 2025
4 September 2024
8 August 2024
30 Juli 2024
8 Marts 2024
30 Juni 2023
Ikke kategoriseret Manualer
- Exibel
- Senco
- OneConcept
- Scandes
- Globe
- JETI
- Klarstein
- HammerSmith
- HEDD
- ETiger
- Netsys
- Skandika
- CDA
- Sandia Aerospace
- Biohort
Nyeste Ikke kategoriseret Manualer
15 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025
15 August 2025