171.892UK User Manual
Introduction
Thank you for choosing this Chord IEM16 UHF in-ear monitoring system. This professional system provides
high quality wireless foldback for accurate audio ference with full freedom of movement. Please read this re
manual before using this equipment in order to avoid damage through incorrect operation and to get the best
performance from your purchase.
Contents:
Please take care when unpacking this product. Inspect for any damage and ensure you have the following
components…
• UHF wireless transmitter
• Detachable BNC antenna
• UHF bodypack receiver
• Dual driver in-ear monitor headphones
• 19” rack-mounting kit
• Mains power adapter
• 2 x AA batteries
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by
qualified personnel before further use.
Avoid impact or heavy vibration to any of the components or over-stretching of the cables.
No user serviceable parts inside transmitter or receiver - refer servicing to qualified service personnel.
Safety
• Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as
stated on the adapter.
• Avoid ingress of water or particles into the transmitter or receiver
• Use alkaline or NiMH batteries in the bodypack receiver and remove if unused for long periods.
• Observe the correct polarity when replacing batteries
Placement
• Ensure good line-of-sight contact between transmitter and receiver for best reception
• Keep all components out of direct sunlight and away from heat sources.
• Do not place heavy objects on top of the receiver or transmitt er
• If rack-mounting, ensure adequate support and connection access for the transmitter unit.
• Keep the transmitter and receiver away from damp or dusty environments.
Cleaning
• Use a soft cloth with a neutral detergent to clean the body of th transmitter /or receiver. e and
• To avoid damage, do not use solvents to clean the components
• Sterile wipes may be used on in-ear headphones – be sure to avoid ingress of fluids into the nozzles
