Chord SPM 5000 MkII Manual

Chord Modtager SPM 5000 MkII

Læs gratis den danske manual til Chord SPM 5000 MkII (5 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Chord SPM 5000 MkII, eller vil du spørge andre brugere om produktet?

Side 1/5
SPM 5000 MK II
POWER AMPLIFIER MANUAL
Chord Electronics Limited
Made in England by:
Chord Electronics Limited, The Pump House, Farleigh Bridge, Farleigh Lane, East Farleigh, Kent.
ME16 9NB. United Kingdom.
Tel: 44(0)1622-721444 Fax: 44(0)1622-721555
OPERATING INSTRUCTIONS
INSTALLATION
Your amplier should be positioned to ensure a free flow of air over the rear heat sink and through
the upper and lower grilles. When driven continuously at well above average listening levels, the
temperature on the heat sink may exceed 50
oC. This is not a fault, but an indication of the need for
adequate ventilation.
Please ensure that the IEC mains lead is correctly terminated.
UK/EUROPE Brown = LIVE = Black USA/CANADA
Blue = NEUTRAL = White
Yellow/Green = EARTH = Green
THE SPM 5000 MUST BE EARTHED AT ALL TIMES VIA ITS OWN MAINS LEAD.
FAILURE TO DO THIS MAY BE HAZARDOUS.
CE This unit complies with EN 50081-1 & IEC 801/2
It has come to light that, in some European
countries a hum may occur if Pre and Power
Ampliers are connected to mains wall sockets
which do not have an earth. Please ensure
that, if this is the case, the pre and power
amps are connected via a multi-way mains
block which contains an earth point at each
socket outlet. This is to ensure that the chassis
metalwork of each item is connected together
and Chord Electronics Limited firmly
recommend that an earthing method for the
building is implemented.


Produkt Specifikationer

Mærke: Chord
Kategori: Modtager
Model: SPM 5000 MkII

Har du brug for hjælp?

Hvis du har brug for hjælp til Chord SPM 5000 MkII stil et spørgsmål nedenfor, og andre brugere vil svare dig