Conair GS23N Manual

Conair Ikke kategoriseret GS23N

Læs gratis den danske manual til Conair GS23N (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Conair GS23N, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

fabric steamer

DUAL HEAT

™

Instruction Booklet

For your safety and continued enjoyment

of this product, always read the instruction

book carefully before using.

Model GS23

IMPORTANT

SAFETY

INSTRUCTIONS

When using electrical appliances, especially

when children are present, basic safety pre-

cautions should always be taken, including

the following:

READ ALL INSTRUCTIONS

BEFORE USING

DANGER - Any appliance is electrically

live even when the switch is off.

To reduce the risk of death by electric shock:

1. Always unplug appliance immediately

after using.

2. Do not place or store appliance where it can

fall or be pulled into a tub or sink.

3. Do not place in, or drop into water or other

liquids.

4. If an appliance falls into water, unplug it

immediately. Do not reach into the water.

WARNING -

To reduce the risk of burns,

electrocution, fire, or injury to persons:

1. This appliance should never be left un-

attended when plugged in.

2. Close supervision is necessary when

this appliance is used by, on, or near chil-

dren or individuals with certain disabilities.

Unsupervised use could result in fire or per-

sonal injury.

3. Use this appliance only for its intended use

as described in this manual. Do not use attach-

ments not recommended by the manufacturer.

4. Never operate this appliance if it has a

damaged cord or plug, if it is not work-

ing properly, or if it has been dropped or

damaged, or dropped into water. Do not

attempt to repair the appliance. Incorrect

reassembly or repair could cause a risk

of fire, electric shock, or injury to persons

when the appliance is used. Return the

appliance to an authorized service center

for examination and repair.

5. Keep the cord away from heated surfaces.

Do not allow cord to contact heated surfaces.

Do not pull or twist cord. Let appliance cool

completely before putting away. Loop cord

loosely around appliance when storing.

6. This appliance has a polarized plug (one

blade is wider than the other). As a safety

feature, this plug will fit in a polarized outlet

only one way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does not fit,

contact a qualified electrician. Do not attempt

to defeat this safety feature.

7. Never drop or insert any object into any

opening.

8. Do not use outdoors or operate where aero-

sol (spray) products are being used or where

oxygen is being administered.

9. Do not use an extension cord to operate

appliance.

10. Surfaces of this appliance may be hot

when in use. Do not let heated surfaces touch

eyes or skin.

11. Do not place the steam nozzle directly on

any surface or on the appliance power cord

while it is hot or plugged in.

12. Unplug this appliance before filling or

emptying. Do not overfill.

13. Do not operate steamer without properly

filling the water container.

14. Never yank cord to disconnect from

outlet; instead, grasp plug and pull to

disconnect.

15. Burns could occur from touching hot parts,

hot water, or steam. Use care when removing

water reservoir or when you turn a steam

appliance upside down – there may be hot

water in reservoir. Always position steamer

head away from you and any other person

when turning on.

16. To reduce likelihood of circuit overload, do

not operate another high wattage appliance on

the same circuit.

17. When installing or removing attachments,

please be sure the unit is off and no steam is

being released to avoid contact with hot water.

18. Use caution when installing or removing

an attachment as it may contain hot water

from condensation. Ensure that the attach-

ment is dry or cooled off to avoid contact with

hot water.

SAVE THESE

INSTRUCTIONS

IMPORTANT

FOR HOUSEHOLD USE ONLY

FILLING INSTRUCTIONS

1. Place the unit on its back on a flat and stable

surface.

2. While holding the water reservoir with one

hand, move the release switch up toward the

steam head nozzle.

3. Pull the reservoir out, away from the body.

4. Turn the reservoir over, revealing the rubber

inlet cover.

5. Open the inlet cover and fill the reservoir

with everyday tap water (filtered water may

reduce hard water problems).

6. Close the inlet cover and return the reser-

voir to its place, making sure that it is secure.

GETTING TO KNOW YOUR STEAMER

Dual heat–

Slide switch to adjust

temperature to Low or High

9-ft. power cord

Red power

light indicator

Water reservoir

release switch

Easy-to-ﬁll

water reservoir

Steam trigger with built-in

switch for constant steam

Green ready

light indicator

Creaser

Brush

3 removable attachments

Soft Cushion Brush

OPERATING

INSTRUCTIONS

1. Plug the unit into the electrical outlet.

2. The power light will light up (red). Allow

one or two minutes for the unit to warm up.

The appliance is ready to use when the ready

light goes on (green).

3. Holding the steam jets away from you and

anyone else in the room, engage the trig-

ger. Steam should now be released from the

steam jets. To have continuous steam, just

move switch down so you will have continu-

ous steam without having to hold the trigger.

Always have steam facing away from you

or anyone in the room.

4. When first using the device, test on an old

cloth, as there may be sediment left from the

manufacturing process or transportation.

5. On the back of the steamer there is a

sliding switch for high and low settings. High

is for heavier and badly wrinkled fabric and

provides faster, hotter, less visible steam.

Low setting should be used for delicate fabrics

like silk, in combination with soft cushion brush

attachment.

6. To stop the flow of steam, release the

trigger or lower the switch.

7. Unplug the device when it is not in use.

STEAMING TIPS

1. To prepare your fabric for steaming, brush

it with the soft cushion brush attachment. This

will loosen the fibers and allow better steam

penetration.

2. Hang your garment or fabric.

3. Pass the steam jets just above the fabric

where the wrinkles are. It may take a few

passes to remove the wrinkles completely.

4. After use, unplug steamer and empty any

remaining water from the tank to avoid leakage.

5. CAUTION: When hanging garment on

a door while steaming, be careful not to

damage the door with steam

LIMITED ONE-YEAR WARRANTY

Conair will repair or replace (at our option) your

unit free of charge for 12 months from the date

of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return

the defective product to the service center

listed on back that is nearest you, together

with your purchase receipt and $3.00 for

postage and handling. California residents

need only provide proof of purchase and

should call 1-800-366-0937 for shipping

instructions. In the absence of a pur-

chase receipt, the warranty period shall be

12 months from the date of manufacture.

ANY IMPLIED WARRANTIES, INCLUDING

BUT NOT LIMITED TO THE IMPLIED

WARRANTY OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE,

SHALL BE LIMITED IN DURATION TO THE

12-MONTH DURATION OF THIS WRITTEN,

LIMITED WARRANTY. Some states do not

allow limitations on how long an implied

warranty lasts, so the above limitations may

not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF

THIS OR ANY OTHER WARRANTY, EXPRESS

OR IMPLIED, WHATSOEVER. Some states do

not allow the exclusion or limitation of special,

incidental, or consequential damages, so the

above limitation may not apply to you. This

warranty gives you specific legal rights, and

you may also have other rights, which vary

from state to state.

Service Centers

Conair Corporation Conair Corporation

Service Department Service Department

150 Milford Road 7475 N. Glen Harbor Blvd.

East Windsor, NJ 08520 Glendale, AZ 85307

For information on any Conair products, call

1-800-3-CONAIR or visit us on the web at

www.conair.com

Please register this product at:

www.conair.com/registration

East Windsor, NJ 08520

Glendale, AZ 85307

Made in China

11PA121686

IB-10893

Produkt Specifikationer

Mærke:	Conair
Kategori:	Ikke kategoriseret
Model:	GS23N

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair GS23N stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Conair Manualer

Conair SW9280MS Manual

3 November 2025

Conair BC200NN Manual

26 September 2025

26 September 2025

26 September 2025

26 September 2025

26 September 2025

Conair MetalCraft HC7000 Manual

26 September 2025

Conair MDF2R Manual

26 September 2025

Conair HS79CR Manual

26 September 2025

Conair CR510R Manual

25 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Schlage FC21 Manual

10 December 2025

Schlage B581 Manual

10 December 2025

Zurn LK4405 Manual

10 December 2025

Waterstone 1202H Manual

9 December 2025

ALNO MC21344 Manual

9 December 2025

Bobrick B-8226 Manual

9 December 2025

Schlage J54DOV Manual

9 December 2025

Planet ITS-5216-8P4T-WV Manual

9 December 2025

4smarts SkyTag Duos Manual

9 December 2025

Biostar BIW88-AHS Manual

9 December 2025