Conair ITH93 Manual

Conair Ikke kategoriseret ITH93

Læs gratis den danske manual til Conair ITH93 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Conair ITH93, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Model ITH93

I N F R A

I N F R A R E D T H E R M O M E

R E D T H E R M O M E

R E D T H E R M O M E T E R

T E R

I N F R A R E D T H E R M O M E T E R

FOREHEAD

Instruction

Booklet

For your safety

and continued

enjoyment of

this product,

always read the

instruction

booklet carefully

before using.

TROUBLESHOOTING AND

DISPLAY ERROR MESSAGES

Battery voltage

is too low

System

error

Measured

temperature

is too high

Measured

temperature

is too low

Replace battery

as soon

as possible

Contact your

local dealer

Stop measurement

SYMBOL REASON SOLUTION

CLASSIFICATION

• Internally powered equipment

• Type BF applied part: Probe

• IP22

• Not category AP / APG equipment

• Mode of operation: continuous operation

KEY TO SYMBOLS

Indicates a hazardous situation which, if not

avoided, could result in death or serious injury

Indicates a hazardous situation which, if not

avoided, may result in minor or moderate injury

Addresses practices not related to personal

injuries, such as product and/or property

damage

Do not dispose of this product in municipal

waste. Collection of such waste separately

for special treatment is necessary

Refer to instruction manual/booklet

Degree of protection against harmful ingress of

particulate matter and water.

Serial number

The package should be protected from rain

The package contains fragile products; please

handle with care

Transport package should be upright

The maximum stacking layer of the same

package; 5 means the layer limit

PRODUCT SPECIFICATIONS

Measure range: 89.6˚–109.4˚F (32˚–43˚C)

Accuracy: ±0.4˚F, 96.8˚F~102.2˚F (±0.2˚C

36–39˚C), outside the range

±0.5˚F±0.3˚C

Resolution: 0.1˚F/0.1˚C

Unit: ˚F/˚C (the default unit is ˚F/0.1˚F)

Measure time: 1 second

Measure distance: 0–2 inch from the center of

forehead between the eyebrows

Memory: 32 sets memories

Work

environmental: Temperature 50˚–104˚F (10˚–40˚)

Relative humidity ≤ 85%RH

Atmospheric pressure 70~106KPa

Storage

environmental: Temperature: -4˚–+131˚(-20˚–+55˚C)

Relative humidity ≤93%RH

Atmospheric pressure 70–106KPa

Power AA(1.5Vx2),d.c.3V

Product size 109.6mm x 44mm x 152.9mm

Product weight 95g (not including batteries)

SUPPLIER’S DECLARATION OF CONFORMITY

Brand: Conair

Model No.: ITH93

Description: Infrared Forehead Thermometer

Responsible Party: Conair Corporation, 150 Milford

Road, East Windsor, NJ 88520

(609) 426-1300

Standards: FCC Part 15 Subpart B, ANSI C63.4-2014

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause unde-

sired operation.

Date of issue:

FCC MARKINGS:

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

CAUTION: Any changes or modifications not expressly

approved by Conair Corporation, the manufacturer of

this product and the party responsible for compliance,

could void the user’s authority to operate the equip-

ment. This thermometer is not a toy

LIMITED THREE YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your unit

free of charge for 36 months from the date of

purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return the

defective product to the service center listed, together

with your purchase receipt and $7.00 for shipping

and handling. California residents need only provide

proof of purchase and should call 1-800-3-CONAIR

for shipping instructions. In the absence of a pur-

chase receipt, the warranty period shall be 36 months

from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS,

OR LIABILITIES, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED

IN DURATION TO THE 36-MONTH DURATION

OF THIS WRITTEN, LIMITED WARRANTY.

Some states do not allow limitations on how

long an implied warranty lasts, so the above

limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH

OF THIS OR ANY OTHER WARRANTY,

EXPRESS OR IMPLIED, WHATSOEVER.

Some states do not allow the exclusion or

limitation of special, incidental, or consequential

damages, so the above limitation may not apply

to you. This warranty gives you specific legal rights,

and you may also have other rights, which vary from

state to state.

Belter model number TE-93

Shenzhen Belter Health Measurement and

Analysis Technology Co.,Ltd.

702/704, Block C,

Tsinghua Unis Science

No.13 Langshan Rd,

Hi-Tech Industrial Park(north). Nanshan District, 518057

Shenzhen

People’s Republic of China

SERVICE CENTER

Conair Corporation

Service Department

1 Cummings Point Rd.

Stamford, CT 06902

203-351-9000

For information on any Conair product, call

1-800-3-CONAIR or visit us on the web at

www.conair.com

Please register this product at

www.conair.com/registration

Made in China

20PA074606 IB-16937

Produkt Specifikationer

Mærke:	Conair
Kategori:	Ikke kategoriseret
Model:	ITH93

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair ITH93 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Conair Manualer

Conair BC200NN Manual

26 September 2025

26 September 2025

26 September 2025

26 September 2025

26 September 2025

Conair MetalCraft HC7000 Manual

26 September 2025

26 September 2025

26 September 2025

25 September 2025

25 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Microchip PIC18F2620 Manual

25 Oktober 2025

Microchip RN240 Manual

24 Oktober 2025

Jane BLW Manual

24 Oktober 2025

Kanto PS200 Manual

24 Oktober 2025

Microchip PIC24HJ12GP201 Manual

24 Oktober 2025

Microchip TC4420 Manual

24 Oktober 2025

Calor Pure Force 3en1 DT8765 Manual

24 Oktober 2025

Hikvision DS-QAE1A40G1-VB Manual

23 Oktober 2025

Microchip HV2818 Manual

23 Oktober 2025

Microchip MIC2298 Manual

23 Oktober 2025