Conair PG1000 Manual

Conair Ikke kategoriseret PG1000

Læs gratis den danske manual til Conair PG1000 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Conair PG1000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Respect the Ritual

™

BATTERY POWERED

Ear/Nose

TRIMMER

Instruction Booklet

For your safety and continued enjoyment of this product,

always read the instruction booklet carefully before using.

Model PG1000

IMPORTANT SAFETY

INSTRUCTIONS

READ ALL INSTRUCTIONS

BEFORE USING

FOR HOUSEHOLD

USE ONLY

KEEP AWAY FROM WATER

WARNING –

1. Use close supervision when the appliance is

used by, on, or near children or individuals with

certain disabilities.

2. Use appliance only for its intended use as

described in this manual. Use only attachments

recommended by the manufacturer.

3. Never operate the appliance if it is not work-

ing properly, has been dropped or damaged.

If appliance has fallen into water, do not

reach for it. Drain the water, let the unit dry, be

sure unit is off and then replace the battery.

4. Do not use the appliance with teeth missing

from the blades, as injury may result. Before

each use, make certain the blades are aligned

properly and oiled.

SAVE THESE

INSTRUCTIONS

TROUBLESHOOTING

There are several things to look for if your

trimmer fails to operate:

1. Be sure the trimmer is turned on.

2. Make sure that the battery is properly placed

in the battery compartment. Test the battery to

be sure it is working.

3. Check the blades to see if they are clogged

with hair clippings; if so, use a cleaning brush

to remove hair.

4. If the trimmer still fails to operate,

take or send it to a Conair Service Center

(see Warranty).

OPERATING

INSTRUCTIONS

1. To insert battery, remove compartment cover

by turning bottom piece of trimmer to the left,

then pulling straight down. (Fig. 1).

2. Insert an AA alkaline battery, positive terminal

downward. (If you are not going to use the

device for long periods of time or if the battery

is dead, remove the battery from the device.

This will increase the battery's life.)

3. After inserting the battery, align the arrow

with the notch on battery cover and turn to the

right to align with the circle. (Fig. 2).

Fig. 2 Fig. 1

*Do not use in the shower. To clean, simply

rinse trimmer blade under faucet.

4. Always purchase the correct size and grade

of battery most suitable for the intended use.

5. Clean the battery contacts and also those of

the device prior to battery installation.

6. Ensure the batteries are installed correctly

with regard to polarity (+ and -).

7. Store unused batteries in their original

packaging, away from metal objects that could

short-circuit them. Never short-circuit batteries.

8. Never dispose of batteries in fire, except

under conditions of controlled incineration.

Failure to observe this precaution may result in

an explosion. Never attempt to recharge primary

batteries, as this may cause leakage, fire,

or explosion.

9. This appliance is not a toy. Keep away

from children.

GETTING STARTED

TO SWITCH TRIMMER HEADS

Check that the device is turned off.

• Remove the cutting head of the device by

turning it to line up mark (

) with mark ( ).

Next pull the head of the device upward

(Fig. 3).

Fig. 4 Fig. 3

• Gently place the desired cutting head on the

device, then lock by turning the cutting head so

that the two marks line up (

and ) (Fig. 4).

TO TRIM YOUR MUSTACHE

Use the mustache comb to comb hair in the

direction of growth. Hold trimmer in an upright

position and bring the tip of the blade straight

into the mustache to trim.

TO TRIM NECKLINE & SIDEBURNS

Attach the detail trimmer attachment to the

trimmer handle. Hold the trimmer blade against

the skin at the length desired and move the

trimmer downward.

TO USE SHAVER ATTACHMENT

Shaving against the direction of your beard

growth, pull your skin tight with your fingers in

inaccessible areas to achieve optimum results

for a smooth, perfect look.

TO TRIM NOSE/EAR HAIR

Using the special circular cutting head for nose

and ears, gently insert the cutting head into the

nostril or ear and move it slightly back and forth

to cut the hair.

NOTE: To trim nose hair, insert trimmer at entry

of nostrils and start trimming the lower hairs

until no longer visible.

To trim ear hair, guide the trimmer around the

outer surface of the ear.

TAKING CARE OF YOUR TRIMMER

BLADE CARE

1. Brush away any loose hair that collects in

the blades.

2. Store trimmer in a safe location.

3. Sharpen or replace both blades at the same

time when servicing your trimmer.

4. Only use Conair

blades with this trimmer.

CLEANING YOUR TRIMMER

Make sure trimmer is off.

1. To remove the trimmer head for cleaning,

turn the head counterclockwise until the “I”

mark aligns with the arrow mark, then lift the

head gently.

2. Rinse the head only under water. For proper

functioning of the unit, the handle cannot touch

or be immersed in water (Fig. 5).

3. After cleaning, make sure to shake the head

dry before reattaching it to the body.

4. To reattach the head onto the body, align the

“I” mark on the head with the arrow mark on

the body and then turn clockwise until the “I”

aligns with the circle mark on the body (Fig. 4).

Fig. 5

TRIMMER FEATURES

1. Removable nose/ear cutting head

2. Detailer attachment

3. Shaver attachment

4. Storage pouch

LIMITED TWO-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your

unit free of charge for 24 months from the date

of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return the

defective product to the service center listed on

back, together with your purchase receipt and

$5.00 for postage and handling. California residents

need only provide proof of purchase and should call

1-800-3-CONAIR for shipping instructions. In the

absence of a purchase receipt, the warranty period

shall be 24 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR

LIABILITIES, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTY OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE,

SHALL BE LIMITED IN DURATION TO THE

24-MONTH DURATION OF THIS WRITTEN,

LIMITED WARRANTY. Some states do not allow

limitations on how long an implied warranty lasts,

so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR

ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES FOR BREACH OF THIS OR ANY

OTHER WARRANTY, EXPRESS OR IMPLIED,

WHATSOEVER. Some states do not allow the

exclusion or limitation of special, incidental, or

consequential damages, so the above limitation

may not apply to you.

This warranty gives you specific legal rights, and

you may also have other rights, which vary from

state to state.

Please register this product at:

www.conair.com/registration

Service Center

Conair Corporation

Service Department

7475 North Glen Harbor Blvd.

Glendale, AZ 85307

17PG028517

IB-15046

Produkt Specifikationer

Mærke:	Conair
Kategori:	Ikke kategoriseret
Model:	PG1000

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair PG1000 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Conair Manualer

Conair BC200NN Manual

26 September 2025

26 September 2025

26 September 2025

26 September 2025

26 September 2025

Conair MetalCraft HC7000 Manual

26 September 2025

26 September 2025

26 September 2025

25 September 2025

25 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Microchip PIC18F2620 Manual

25 Oktober 2025

Microchip RN240 Manual

24 Oktober 2025

Jane BLW Manual

24 Oktober 2025

Kanto PS200 Manual

24 Oktober 2025

Microchip PIC24HJ12GP201 Manual

24 Oktober 2025

Microchip TC4420 Manual

24 Oktober 2025

Calor Pure Force 3en1 DT8765 Manual

24 Oktober 2025

Hikvision DS-QAE1A40G1-VB Manual

23 Oktober 2025

Microchip HV2818 Manual

23 Oktober 2025

Microchip MIC2298 Manual

23 Oktober 2025