Delta Dore Delta 8000 RF Manual

Delta Dore Modtager Delta 8000 RF

Læs gratis den danske manual til Delta Dore Delta 8000 RF (1 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Delta Dore Delta 8000 RF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

4/ ASSOCIATING THE WIRELESS GATEWAY WITH A PROGRAMMER,

SENSOR OR HOME AUTOMATION BOX

5/ ASSOCIATION OF THE WIRELESS GATEWAY AS THERMAL

INTEGRATOR

6/ DELETING ASSOCIATIONS

6.1 DELETING THE ASSOCIATION OF THE GATEWAY WITH A ROOM THERMOSTAT

❶ Press and hold the left hand side button for 3 seconds

until LED 1 ﬂ ashes, then release.

❷ Tap the left hand button repeatedly to select the channel

you want to delete.

❸ Press and hold the right hand side button for 30 seconds,

until both LEDs ﬂ ash for 2 seconds.

6.2 DELETING THE ASSOCIATION WITH A PRODUCT SUCH AS A PROGRAMMER, SENSOR OR HOME

AUTOMATION BOX

❶ Press and hold the right hand side button for 3 seconds

until LED 2 ﬂ ashes, then release.

❷ To select the channel you want to delete tap the right

hand side button repeatedly.

❸ Tap the left hand side button repeatedly the type of

product you want to delete.

❹ Press and hold the left hand side button for 30 seconds,

until both LEDs ﬂ ash for 2 seconds.

6.3 DELETING ALL THE ASSOCIATIONS TO THE GATEWAY

❶ Press simultaneously 30 seconds on the gateway-keys until

the 2 leds ﬂ ashes quickly, then release.

3/ ASSOCIATING THE GATEWAY WITH A WIRELESS ROOM THERMOSTAT

1/ LOCATION/MOUNTING

2/ CONNECTION

❶ Shut down the bus power supply.

❷ ❸ Open the unit door by pushing the pin using

a screwdriver.

❹ Attach the base with fasteners compatible with

the mount.

❺ Connect the bus to the terminal on the base.

❻ Close the cover and switch the system back on.

230V~

50 Hz

OFF

❶ On the gateway:

Press and hold the left hand side button for 3 seconds until LED 1 ﬂ ashes. Release.

4.1 ACTIVATING THE ASSOCIATION MODE

❶ Press and hold the right hand side button for 3 seconds On the gateway:

until LED 2 ﬂ ashes, then release.

❷ Tap the right hand side button repeatedly to select the

channel(s) to be associated. By default, all the channels will be

selected. The relevant LED(s) on the technical unit will ﬂ ash.

❸ Tap the left hand side button repeatedly to select the type

of product to be associated. LED 2 ﬂ ashes:

- 1 ﬂ ash ( ... ... ... ): Programmers (e.g.: Programmer, TYBOX 2000WT)

- 2 ﬂ ashes ( ... ... ): Sensors (e.g.: window/door magnetic contact, motion detector, outdoor T°)

- 3 ﬂ ashes ( ... ... ): Home automation box (e.g. TYDOM 1.0)

Then associate the product in question.

4.2 ASSOCIATING A PROGRAMMER

❹ On the programmer:

Turn the selector knob to , then press and hold

the 2nd button from the left for 3 seconds and release.

❺ The screen displays . Press OK to display theLn01

number of channels associated. Press and hold OK for

3 seconds to open the mode for ﬁ nding channels to

be associated.

❻ The display ﬂ ashes, indicating the number of

channels found.

❼ When the ﬂ ashing stops, press OK to conﬁ rm.

4.3 ASSOCIATING A SENSOR

❹ Press the relevant transmitter key (window/door magnetic contact,

motion detector, etc.) to conﬁ rm.

4.4 ASSOCIATING A HOME AUTOMATION BOX

❹ Conﬁ rm the association via the application dedicated to the

product (refer to the manual).

4.5 TO EXIT THE ACTIVE MODE

Check that the gateway LED 2 is no longer ﬂ ashing. The products are associated.

You can also exit the current mode by pressing the right hand button for 3 seconds.

❶ Set the product that will receive information from the gateway in 'thermal integrator' mode to standby

(e.g. TYBOX 2000 WT, refer to the manual).

❷ On the gateway, press and hold the 2 buttons simultaneously for 3 seconds. Both LEDs will ﬂ ash once.

❸ Check that the association has been completed successfully on the other product.

3 s

Bus

BUS 1 BUS 2

BUS

Radio/bus

gateway

Technical unit

To connect the Bus, use the cable supplied (2x0.75²,

length 1 m) or twisted pair cable with a minimum

section of 6/10th, max. length. 30 m :

- 4 wires maximum per terminal

- Ensure the wires are correctly connected

to + and - poles.

- The gateway can be connected to either one of the

2 Bus terminals.

Before associating any of these products, the gateway has to be associated with a thermostat.

The sensors associated with the channel will also be deleted.

If the gateway is connected to a “metering version” technical unit.

WITH A PROGRAMMABLE ROOM

THERMOSTAT (PRT)

❷ Turn the selector

knob to , then press

and hold the 2nd

button from the left

for 3 seconds. Release

❸ The screen displays

Ln01. Press OK to

display the number of

associated products.

Press and hold OK for

3 seconds to open the

mode for ﬁ nding

products to be

associated.

❹ The display ﬂ ashes

indicating the number

of products found.

❺ When the ﬂ ashing

stops, press OK to conﬁ rm.

The LED 1 stops ﬂ ashing.

❻ The screen displays

CF20. Press OK, then

+ and - to select the

output to which the

room thermostat is to

be associated.

Conﬁ rm with OK.

❼ The screen displays . Select the transmitter CF21

and press OK.

❽ The screen displays Select the limitation CF22.

value and press OK to conﬁ rm.

To exit the active mode:

Press and hold the left hand side button for 3

seconds until LED 1 stops ﬂ ashing.

Release.

WITH A ROOM THERMOSTAT (RT)

❷ Press and hold the 1st and

4th button for 3 seconds.

Release.

❸ The display ﬂ ashes indicating

the number of products found.

When the ﬂ ashing stops,

press OK to conﬁ rm.

The LED 1 stops ﬂ ashing.

❹ The screen displays .CF20

Press OK, then + and - to select

the output to which the room

thermostat is to be associated.

Conﬁ rm with OK.

❺ The screen displays .CF21

Select the transmitter and

press OK.

❻ The screen displays .CF05

Select the thermostat type and press OK.

3 s

Output

number

1 to 16 depending on the

system.

Transmitter

type

0Underﬂ oor heating

1 Heater

2 Ceiling or ductable

(2) Thermostat

type

0 Zone thermostat

1 Master thermostat

(2)

CF05: the Master thermostat enables the

centralised use of ON/OFF and HEAT/COOL

(at least one Master thermostat is required in an

installation without a programmer).

Output nu-

mber

1 to 16 depending on the

system.

Transmitter

type

0Underﬂ oor heating

1 Heater

Limitation

in heating

percentage

From 10 to 100% in 10

increments (100%= No

limitation, by default).

TECHNICAL CHARACTERISTICS

• Supply by the bus, 24V

• Bus Input/output 2 wires

• Class III insulation

• X3D Transmission frequency:

868.7 MHz to 869.2 MHz

• Maximum radio power < 10 mW

• Receiver category II

• Radio range: 100 to 300 metres in an open ﬁ eld,

variable depending on the associated equipment

(the range can vary depending on the installation

conditions and the electromagnetic environment)

• Association capacity: 64 products max.

• Surface-mounted

• Dimensions: 54 x 120 x 25 mm

• Degree of protection: IP 44 - IK 04

• Operating temperature: 0 to +40°C

• Storage temperature: -10 to +70°C

• Installation in an environment with normal

pollution levels

3 s

DIP

3 s

30 s

3 s

30 s

3 s

www.deltadore.com

EN Radio receiver / Gateway

DELTA 8000 RF

Produkt Specifikationer

Mærke:	Delta Dore
Kategori:	Modtager
Model:	Delta 8000 RF

Har du brug for hjælp?

Hvis du har brug for hjælp til Delta Dore Delta 8000 RF stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Delta Dore Manualer

Delta Dore RF 7210 Manual

23 September 2025

Delta Dore Delta 8000 BT Manual

15 August 2024

Delta Dore Tyxia 4600 Manual

14 August 2024

Delta Dore Tybox RF 6700 FP Manual

14 August 2024

Delta Dore Tyxia 5612 Manual

13 August 2024

Delta Dore Tyxia 4801 Manual

13 August 2024

Delta Dore Tyxia 5610 Manual

13 August 2024

Delta Dore Tyxia 4620 Manual

13 August 2024

Delta Dore Tyxia 4860 Manual

12 August 2024

Delta Dore RF 6420 Manual

12 August 2024

Modtager Manualer

Nyeste Modtager Manualer

Taramp’s Smart 8 Bass Manual

3 November 2025

Winegard Boost XT Pro BT-1000 Manual

3 November 2025

Rockville RVT-1 Manual

3 November 2025

Topping L50 Manual

3 November 2025

Taramp’s Smart 5 Bass Manual

3 November 2025

Taramp’s T 12.000 Chipeo Manual

2 November 2025

Taramp’s BASS 1200 Manual

2 November 2025

Taramp’s BASS 8K Manual

2 November 2025

Khadas BT Magic Manual

2 November 2025

Hifonics BRUTUS BXX2400.1D Manual

2 November 2025