Draper DD1B Manual

Draper Måling DD1B

Læs gratis den danske manual til Draper DD1B (1 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Draper DD1B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com Email: sales@drapertools.com

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK 0622

DAMP

DETECTOR

34873 – DD1B INSTRUCTIONS FOR USE

1. Specication

4. Maintenance and Disposal

5. Explanation of Symbols

2. Health and Safety Information

3. Operating Instructions

Stock No. 34873

Part No. DD1B

Battery 9V, PP3

Read the instruction

manual

Warning!

Do not abandon in the

environment

Requires 1 x 9V battery

(not supplied)

Do not incinerate or throw

onto re

UK Conformity Assessed

European conformity

WEEE – Waste Electrical &

Electronic Equipment

Do not dispose of Waste Electrical &

Electronic Equipment in with domestic

rubbish

• Read this manual in full before using this product and retain these

instructions for future use.

• While this device is intended to detect moisture within surfaces, it should

not be used in wet atmospheric conditions.

• DO NOT immerse this device in water or allow the battery to come into

contact with liquids.

• DO NOT abuse, mutilate or burn the battery.

• Check the device carefully before use.

− DO NOT use this product if it is damaged in any way or there is evidence

of battery leakage.

3.1 Checking the Detector Before Use

This detector is highly sensitive and familiarity with the tones it emits is

essential for eective use. To hear the device’s response to dierent moisture

levels, hold the button on the right of the device and place the probes on the

palm of your hand, then on the back of your hand. The dierent moisture levels

are indicated by the change in pitch of the audible tone.

Important: Test the detector in this way before use. If the LED does not EVERY

light, or there is no audible signal, test or replace the battery.

3.2 Testing for Damp

To test for damp, touch the probes against the surface and press the button on

the device. If moisture is present, the detector will emit an audible tone. The

more moisture present, the higher the pitch of the tone.

Important: When testing softer surfaces, like wood, wallboard or plasterboard,

the probes should slightly penetrate the surface and pierce any layers of paint.

• NO AUDIBLE SIGNAL indicates that the area being tested is dry and not at

risk from damp and is therefore ready for decorating.

• SLOW CLICKING indicates slightly higher than normal levels of moisture.

− If this occurs, test a wider area and attempt to trace the source of the

moisture (see 3.3 Tracing Sources of Damp).

− Materials may need to be replaced if moisture persists at a consistent

level for prolonged periods.

• A HIGH PITCHED CONTINUOUS TONE indicates a high level of moisture in

the area being tested; take remedial action immediately.

Important: New plastering and fresh timberwork should be allowed to dry out

before decorating.

4.1 Cleaning and Storage

• Clean the product regularly using a dry cloth.

CAUTION! NEVER use aggressive chemicals to clean the product as these

may damage plastic or insulated parts.

• Remove the cap from the base of the device and t it over the probes if the

detector will not be used for prolonged periods.

• Store the product in a clean and dry location, out of reach of children.

4.2 Replacing the Battery

The detector is powered by a 9V PP3 type battery (not supplied). The LED

illuminates when the button is pressed if there is power to the device.

To replace the battery, slide the battery cover away from the rear of the device,

disconnect the battery from the contacts and install a new one in its place.

4.3 Disposal

At the end of its working life, or when it can no longer be repaired, dispose of

this product according to local regulations. Contact your local authority for

details of collection schemes in your area.

In all circumstances:

• DO NOT dispose of this product with domestic waste.

• DO NOT incinerate.

• DO NOT abandon in the environment.

• Dispose of the battery separately and in accordance with local regulations

or return it to your warranty agent or stockist for recycling.

• DO NOT burn or mutilate batteries as this may release toxic or corrosive

materials.

Original Instructions

Version 2 – June 2022

Important: The correct diagnosis of some damp problems is complex. If you

cannot trace the cause of damp, or are uncertain as to what remedial action to

take, always consult a specialist surveyor or damp treatment company.

Important: This detector may sometimes give a positive audible detection on

walls that have been successfully treated for rising damp. This is due to the

presence of moisture-absorbing salts that may be used as part of the

treatment.

3.3 Tracing Sources of Damp

Test the surface at regular intervals of approximately 100mm (4”) until the

highest pitched signal is heard or the detector is clicking fastest; this will

identify the dampest area. Continue to test around the dampest area to identify

the direction and spread of the damp from the source.

Produkt Specifikationer

Mærke:	Draper
Kategori:	Måling
Model:	DD1B

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper DD1B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Draper Manualer

Draper Expert 74307 Manual

2 Oktober 2025

Draper Expert 94079 Manual

2 Oktober 2025

Draper Expert 80859 Manual

2 Oktober 2025

Draper Expert 94255 Manual

1 Oktober 2025

Draper 99810 Manual

1 Oktober 2025

Draper Expert 07089 Manual

1 Oktober 2025

Draper 92224 Manual

1 Oktober 2025

Draper Expert 94078 Manual

1 Oktober 2025

Draper Expert 23708 Manual

1 Oktober 2025

Draper Expert 21250 Manual

24 September 2025

Måling Manualer

Nyeste Måling Manualer

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025

1 December 2025