Draper MM100 Manual

Draper Måling MM100

Læs gratis den danske manual til Draper MM100 (2 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Draper MM100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

MOISTURE METER

43618 – MM100 INSTRUCTIONS FOR USE

Original Instructions

Version 3 – August 2022

1. Scope

This product is designed to measure the moisture level in

sawn timber, paper, cardboard and hardened materials

such as mortar, concrete and plaster. It may also be used to

measure the ambient temperature. Part of our core range,

this product is suitable for regular use by enthusiasts and

tradespersons alike.

Important: This product is intended as a guide only. For

precise results, specially engineered equipment should be

used.

Read this manual in full before attempting to use this

product and retain it for later use. Always use the latest

version of the manual.

2. Specication

Stock No. 43618

Part No. MM100

Measurement range:

Wood: 6–42%

Hardened

materials: 0.2–2%

Ambient

temperature: 0–40°C (32–140°F)

Accuracy:

 Wood: ±2%at<30% ±4%at≥30%

Hardened

 materials: ±0.1%at<1.4% ±0.2%at≥1.4%

Power supply: 1.5V (4 x LR44, supplied)

Gross weight: 0.05kg

Dimensions: W 40 x H 80 x D 20mm

Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 Website: drapertools.com

General Enquiries: +44 (0) 23 8026 6355 Email: sales@drapertools.com

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK 0822

3. Warranty

Should the tool develop a fault, return the complete tool to

your nearest distributor or contact Draper Tools directly.

Proof of purchase must be provided.

If, upon inspection, it is found that the fault occurring is

due to defective materials or workmanship, repairs will be

carried out free of charge. This warranty covers parts and

labour for 12 months from the date of purchase. However,

if the tools are hired out, the warranty period is 90 days

from the date of purchase.

This warranty does not apply to any consumable parts,

batteries or normal wear and tear, nor does it cover any

damage caused by misuse, careless or unsafe handling,

alterations, accidents, or repairs attempted or made by any

personnel other than the authorised Draper Tools repair

agent.

For full details, visit drapertools.com/warranty

4. Health and Safety Instructions

• DO NOT use this product in wet atmospheric

conditions.

• Check the device carefully before use.

− DO NOT use this product if it is damaged in any

way or there is evidence of battery leakage.

− If battery acid comes into contact with your eyes

orskin,ushwithplentyofcleanwaterandseek

immediate medical attention.

• Use this product only for its intended purpose and do

not modify it in any way.

• DO NOT immerse this device in water or allow the

battery to come into contact with liquids.

• DO NOT abuse, mutilate or burn the battery.

• Keep this product out of reach of children.

5. Operating Instructions

5.1 Installing the Battery

This product is powered by 4 x LR44 batteries (supplied).

To install the batteries, remove the battery compartment

cover from the back of the device using a small PH-type

screwdriver and insert the batteries, observing the correct

polarity.

5.2 Powering On and Mode Selection

To switch on the device, press and release the SET/ON

button once. Pressing the button again illuminates the

display backlight for three seconds.

To select a mode, hold the SET/ON button for three

secondsuntilthemodesymbolbeginstoash.Pressthe

button again to switch between modes:

Wood measurement mode

Hardened materials measurement mode

°C

Temperature measurement mode (Celsius)

°F

Temperature measurement mode (Fahrenheit)

The chosen mode will activate after three seconds of

inactivity.

5.3 Taking a Measurement

In either temperature mode, the ambient temperature is

read automatically and displayed with the chosen units.

For wood or hardened materials measurements, press both

probes against the target material and apply pressure. The

moisture percentage is displayed after approximately one

second.

Important: The material type or the temperature of the

surfacemayaectthereading.Moisturelevelsmay

change over time.

5.4 Other Display Symbols

The following symbols or readings may also appear on the

display:

Low battery; replace the batteries before next use

Out of operating range

5.5 Powering O

Thedeviceswitchesoautomaticallyunderthefollowing

conditions:

• Wood and materials modes: Inactivity or no change

in reading for 15 seconds

• Temperature modes: 15 seconds after mode

selection

• Any mode: 15 seconds after the low battery icon

appears

6. Maintenance and Disposal

• Clean this device using a dry cloth ONLY.

• Keep the sensors clean at all times.

• Store the product in a clean and dry location, out of

reach of children.

• Replace the probe cover after use and remove the

batteries before storing the product for extended

periods.

For repair and replacement options, please contact the

Draper Tools Product Helpline for details of your nearest

authorised agent.

At the end of its working life, dispose of the product

responsibly and in line with local regulations. Recycle

where possible.

• DO NOT dispose of this product with

domestic waste; most local authorities

provide appropriate recycling facilities.

• Dispose of batteries separately and

responsibly; DO NOT burn or mutilate

batteries as this may release toxic or

corrosive substances.

7. Explanation of Symbols

Read the instruction manual

Warning!

Donotincinerateorthrowontore

LCD

LCD display

Requires 4 x LR44 batteries

UK Conformity Assessed

European conformity

WEEE – Waste Electrical & Electronic

Equipment

Do not dispose of this product with domestic waste

Produkt Specifikationer

Mærke:	Draper
Kategori:	Måling
Model:	MM100

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper MM100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Draper Manualer

Draper Expert 21250 Manual

24 September 2025

Draper Expert 22230 Manual

23 September 2025

23 September 2025

23 September 2025

23 September 2025

23 September 2025

23 September 2025

Draper Expert 22278 Manual

23 September 2025

Draper 24701 Manual

23 September 2025

Draper 99752 Manual

23 September 2025

Måling Manualer

Nyeste Måling Manualer

Tektronix MSO46 Manual

24 September 2025

Eastron SDM320C-LR Manual

23 September 2025

Hikmicro Mini2 Manual

22 September 2025

Hikmicro Mini 2 Plus Manual

22 September 2025

REV EMT707CTLA Manual

22 September 2025

Rigel Medical SafeTest 60 Manual

21 September 2025

Rigel Medical Citrex H3 Manual

21 September 2025

Rigel Medical UNI-SiM Manual

21 September 2025

Rigel Medical PatSim 200 Manual

21 September 2025

Rigel Medical VenTest 800 Manual

21 September 2025