Earthworks Icon Pro Manual

Earthworks Mikrofon Icon Pro

Læs gratis den danske manual til Earthworks Icon Pro (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Earthworks Icon Pro, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

For more information, please visit

www.earthworksaudio.com or call 1-603-654-2433.

BROADCAST-QUALITY

XLR STREAMING MICROPHONE

ICON PRO

1 ICON Pro Microphone with Custom Triad Orbit Stand

1 3/8" Thread Adapter

YOUR PURCHASE INCLUDES

Thank you for purchasing the

Earthworks ICON Pro Streaming Microphone!

Before setting up the microphone, pull back all existing settings and EQ. By doing this, you will have a

baseline understanding of how our microphones sound, and will then be able to adjust accordingly.

Begin by removing all included components from the packaging. Make sure to mute any incoming

signal to speakers or headphones to avoid any loud “pops” when connecting.

Connect the microphone to an audio interface supplying 24-48V phantom power using a standard

XLR cable. Please allow one minute for the microphone to settle. (Plugging in the microphone while

phantom power is turned on will not damage the microphone, and will actually settle the microphone

faster.)

GETTING STARTED

SPECIFICATIONS

WARRANTY

All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at:

earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our

warranty/repair department by email at: returns@earthworksaudio.com.

NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/

received second-hand, please contact us via our website.

37 Wilton Rd. Milford, NH 03055

(603) 654-2433

sales@earthworksaudio.com

earthworksaudio.com

To guarantee your microphone provides years of performance, follow these guidelines:

• Avoid extreme heat and condensing humidity.

• Rough handling may damage the microphone even if no markings are visible.

• When not in use, keep the microphone in its case.

If you encounter issues while using your Earthworks Audio microphone, please make sure that:

• Your microphone is connected to an active power supply with phantom power on.

• Your microphone and XLR cable are well connected.

• The microphone is positioned at an appropriate distance from the sound source.

• External noise in your recording environment is kept to a minimum.

• Your recording space is at room temperature and free of dust.

If your issue persists after checking, please contact us via our website.

TROUBLESHOOTING

PROPER MAINTENANCE

ICON PRO

Frequency Response 20Hz-30kHz

Polar Pattern Cardioid

Diaphragm Size Small

Peak Acoustic Input 139dB SPL

Power Source 24-48v Phantom Power

Signal-to-Noise Ratio 79dB (A weighted)

Noise 15dB SPL (A weighted)

Dimensions L x D 5.137" x 1.6"

Weight 1.5lb (0.68kg)

Produkt Specifikationer

Mærke:	Earthworks
Kategori:	Mikrofon
Model:	Icon Pro
Type:	Podcast-mikrofon
Højde:	305 mm
Produktfarve:	Sort
Forbindelsesteknologi:	Ledningsført
LED-baggrundsbelysning:	Ja
Baggrundsfarve:	Rød/Grøn
Enhedsgrænseflade:	XLR-3
Indgangsspænding:	24 - 48 V
Mikrofon frekvens:	20 - 30000 Hz
Mikrofonretningstype:	Kardioid
Strømforbrug:	10 mA
Følsomhed (1 kHz):	20
Mikrofon total harmonisk forvrængning (THD):	3 %
Tilsvarende støjniveau:	16 dB
Maksimalt lydtrykniveau (1kHz):	139 dB