Electro Harmonix Pico POG Manual


Læs gratis den danske manual til Electro Harmonix Pico POG (4 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 53 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 27 anmeldelser. Har du et spørgsmål om Electro Harmonix Pico POG, eller vil du spørge andre brugere om produktet?

Side 1/4
User Manual
Polyphonic Octave Generator
Welcome to the Electro-Harmonix Pico POG,
Polyphonic Octave Generator. Just like the Micro
and Nano POGs, the Pico POG generates both high
and low octave signals, which you can mix with your
dry signal. Whether you play single notes, arpeggios,
or full chords, the Pico POG will track every note or
chord you play with precision. The Pico POG also
features a TONE knob to allow tonal sculpting of your
octaves and, in Tone mode, your dry signal as well.
Operating Instructions
Insert the output plug from the supplied 9VDC AC
adapter into the power jack at the top of the Pico
POG. The Pico POG must be powered to pass signal,
even in bypass—the Pico POG features buffered
analog bypass. Connect an instrument cable from
your instrument to the Input jack. Connect an
instrument cable between the Output jack and a
suitable amplifier. Click the footswitch to engage
the Pico POG and light the LED.
N Y D S PC
8
9
1 2
5
6
6
3 4
7
Power Suppy Requirements: Voltage: 9VDC Current: 100mA Polarity: Center-Negative
This device comes equipped with an Electro-Harmonix 9.6DC-200 power supply. Use of the wrong adapter or a
plug with the wrong polarity may damage the device and void the warranty. Do not exceed 10.5VDC on the power
plug. Power supplies rated for less than 100mA may cause the device to act unreliably.


Produkt Specifikationer

Mærke: Electro Harmonix
Kategori: Hi-Fi system
Model: Pico POG

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Pico POG stil et spørgsmål nedenfor, og andre brugere vil svare dig