Electro Harmonix Nano POG Manual

Electro Harmonix Hi-Fi system Nano POG

Læs gratis den danske manual til Electro Harmonix Nano POG (4 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Electro Harmonix Nano POG, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

NANO POG

Polyphonic Octave Generator

Congratulations on your purchase of the NANO POG Polyphonic Octave

Generator. The NANO POG can simultaneously generate multiple octaves from

your input signal. Whether you play single notes, arpeggios, or full chords, the

NANO POG will precisely track every note or chord that you play. With the NANO

POG, you can mix together your dry signal with two different octaves (one above

and one below your original note) to create totally new, inspiring tones.

- CONTROLS –

DRY Knob – Controls the output volume of the DRY signal at the EFFECT OUT

jack. The DRY signal is the signal present at the INPUT jack. As this knob is

turned clockwise, the volume of the DRY signal at the EFFECT OUT Jack

increases.

SUB OCTAVE Knob – Controls the output volume of the SUB OCTAVE signal.

The SUB OCTAVE signal is one octave below the original input signal, or half the

frequency. As this knob is rotated clockwise, the volume of the SUB OCTAVE

signal increases.

OCTAVE UP Knob – Controls the output volume of the OCTAVE UP signal. The

OCTAVE UP signal is one octave above the original input signal, or twice the

frequency. The volume of the OCTAVE UP signal increases as this knob is rotated

clockwise.

FOOTSWITCH and LED – The footswitch selects whether the NANO POG is

engaged or in buffered bypass mode. When the effect is engaged, the LED is lit.

INPUT Jack – This ¼” jack is the audio input for the NANO POG. The input

impedance is 2M.

EFFECT OUT Jack – This ¼” jack outputs the NANO POG effect. The output

impedance at this jack is 700.

DRY OUT Jack – This ¼” jack outputs a buffered version of the input signal.

The output impedance at this jack is 500. Note: The DRY Knob does not

control the volume at the DRY OUT Jack. DRY OUT is always identical to the

input signal, with no change in volume.

Produkt Specifikationer

Mærke:	Electro Harmonix
Kategori:	Hi-Fi system
Model:	Nano POG

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Nano POG stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hi-Fi system Electro Harmonix Manualer

Electro Harmonix 8 Step Program Foot Controller Manual

6 Oktober 2025

Electro Harmonix Pico POG Manual

24 August 2024

Electro Harmonix White Finger Manual

18 August 2024

Electro Harmonix Micro POG Manual

13 August 2024

Electro Harmonix Nano POG Manual

10 August 2024

Electro Harmonix H.O.G.2 Manual

10 August 2024

Electro Harmonix Clockworks Manual

9 August 2024

Electro Harmonix Soul Preacher Manual

8 August 2024

Electro Harmonix POG 2 Manual

8 August 2024

Electro Harmonix Tone Corset Manual

7 August 2024

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer

Energy Sistem Classy Manual

15 December 2025

Energy Sistem Tower 5 g2 Manual

10 December 2025

Walrus Audio DFX-1 Manual

10 December 2025

FiiO M27 Manual

6 December 2025

Morel Sopran 622 Manual

5 December 2025

Reflexion HIF2084IR Manual

1 December 2025

Fantech MITHRIL ANC TX4 Manual

29 November 2025

Reflexion HRA1881 Manual

29 November 2025

Fantech WAVE 16 TW16 Manual

29 November 2025

Fantech WAVE 15 TW15 Manual

29 November 2025