Elektrobock Pocket Home PH-SP1 Manual

Elektrobock Modtager Pocket Home PH-SP1

Læs gratis den danske manual til Elektrobock Pocket Home PH-SP1 (4 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Elektrobock Pocket Home PH-SP1, eller vil du spørge andre brugere om produktet?

Side 1/4
Version 11.02
Wireless receiver for control of
electric heating devices
- UNDER THE SWITCH -
PH-SP1
Operating instructions
Control of electric heating systems
Component of the PocketHome®system
Two-way radio communication at 433,92 MHz
The connected electric appliance is switched
according to the required temperature
The control unit PH-BSP is the pilot component
INSTALLATION
The device can only be installed by a person with adequate
qualification! The installation must be executed in
a voltage-free state!
Wiring diagram:
230 V/ 50 Hz
L
N
max.
16 A
L N
FUNCTION BUTTON ( R ) :
SHORT PRESSING (for
about1,5s) -coding.
LONG PRESSING (for about 5s)
-RESET deleting the code from
the memory (the green and red
LEDs flash simultaneously).
PH-SP1 is used for switching the heating device in connection
with the PH-BSP control unit. The big advantage is mounted
directly into the
installation box.


Produkt Specifikationer

Mærke: Elektrobock
Kategori: Modtager
Model: Pocket Home PH-SP1

Har du brug for hjælp?

Hvis du har brug for hjælp til Elektrobock Pocket Home PH-SP1 stil et spørgsmål nedenfor, og andre brugere vil svare dig