BPT003 is used for switching the heating device in connec-tion with the BPT010 or BPT710
thermostat. "CC
"CC
GREEN DIODE
(LED1)
RED DIODE
(LED1)
Child safety
FUNCTION
BUTTON
'6/$5*0/#6550/
4)03513&44*/(DPEJOH
-0/(13&44*/(GPSBCPVUT3&4&5
%FMFUJOHUIFDPEFGSPNUIFNFNPSZUIFHSFFOBOESFE
-&%TnBTITJNVMUBOFPVTMZ
1. Connect receiver in 230V/50 Hz socket
2. The green diode flashes on the receiver; thus the receiver is
ready for further setting.
3. Shortly press the FUNCTION BUTTON (see pic.2) for about
1.5 s (the green and red diode are flashing alternately).
4. Activate the receiver on the thermostat (transmitter)
according to the manual for the given transmitter (BPT010
or BPT710).
5. If the code has been learned correctly, theHSFFOBOESFE
EJPEFTnBTITJNVMUBOFPVTMZ
*/%*$"5*0/%*0%&4 5&$)/*$"-1"3".&5&34
-&% -&% '6/$5*0/
empty memory, code not learned
Code learnd
FLASHING ALTERNATELY= code learning mode
FLASHING SIMULTANEOUSLY= code has been learned
SIMULTANEOUS LONG FLASH= code was ERASED
relay switched
ERROR (if no signal is received from thetran-
smitter within approx. 6 hours, it switches tothe
2-min-ON / 8-min-OFF mode). LED flashes only if
the relay is on, i.e. for 2 minutes.
."%&*/$;&$)3&16#-*$
Pb
-&"%'3&&
Im Einklang mit RoHS
&-&,530#0$,$;TSP
Blanenská 1763
Kuřim 664 34
Tel.: +420 541 230 216
XXXFMCPDLD[
Power supply 230 V/ 50 Hz
Communication type two-way
Frequency 433,92 MHz
Sensitivity < - 95 dBm
Range 200 m (in free area), 25 m (in built-up area)
Output relay, max.16A/ 250 VAC
Protection IP40
Working temp. 0 to 40°C
Dimensions(LxBxH) 109 mm x 80 mm x 31mm
&91-"/"5*0/-*56/-*5'-"4)*/(
%&$-"3"5*0/0'$0/'03.*5:
We, ELEKTROBOCK CZ s.r.o., herewith declare that our
product BPT003 is in conformity with the basic requirements
and other respective provisions of the directive 1999/5/ES.
Issued: 1.04.2012
$&35*'*$"5&0'(6"3"/5&&
HVBSBOUFFQFSJPEGPSUIFQSPEVDUBNPVOUTUPZFBST
QSPEVDU/P
FYBNJOFECZ
EBUFPGTBMF
TUBNQPGTIPQ
4FOEUIFQSPEVDUGPSHVBSBOUFFBOEBGUFS
HVBSBOUFFTFSWJDFUPNBOVGBDUVSFSTBEESFTT
