Elite Saker Plus SK200XVW2 Manual

Elite Projektionslærred Saker Plus SK200XVW2

Læs gratis den danske manual til Elite Saker Plus SK200XVW2 (5 sider) i kategorien Projektionslærred. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Elite Saker Plus SK200XVW2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Rev.082615 1 www.elitescreens.com

Electric Wall/Ceiling Projection Screen

Saker

SakerSaker Plus

Plus

Plus Plus Series

Series

Series Series

User’s Guide

Important Safety & Warning Precautions

Make sure to read this user’s guide and follow the procedures below.

Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra

Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens.

Unapproved changes or modications (except for cutting the power cord for hardwire installations) to this

unit are prohibited and will void your warranty. For more information, please contact our Technical Support

Department at (877) 511-1211 Ext. 604.

 Please retain this user’s guide for future reference.

 To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the

manufacturer.

 Handle the unit carefully during transportation to avoid any damages.

 To ensure safe and reliable operation, direct connection to a properly grounded power source is

advised.

 The power outlet supplying power to the unit should be close to the unit and easily accessible.

 Do not install the unit on uneven or inclined surfaces.

 Do not put heavy objects on the power cord and position it properly to avoid creating a trip

obstacle.

 Never overload the power cord to prevent an electric shock or re due to a loose contact or a short

circuit.

 There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself.

No one except authorized technicians can open and make repairs to this unit.

 Make sure the power source this unit is connected to has a continuous power ow.

 If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to

avoid overheat.

 Do not handle the power plug when your hands are wet or your feet are in contact with water.

Do not use this unit under the following circumstances.

 Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.

 Avoid direct Sunshine, rain shower and moisture.

 Keep away from re sources and high temperature to prevent this device from overheating.

 Cut o the power supply rst before transportation or maintenance.

 Fully disconnect from the power supply when the unit is not in use for a long period of time, as

should be done with any other electric household appliance.

 To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is

obvious damage or if there are any evident broken parts.

Rev.082615 2 www.elitescreens.com

WARNING

The Screen’s Top Black Drop is already set to its maximum drop distance. There is extra top black NO

drop in the roller. Please be aware of this as it will void the limitation of your warranty.

Individual modications to this product are prohibited and will void the warranty with the manufacturer.

Please contact Elite Screens Customer Service for any questions.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that the interference will not occur on a particular installation. If this

equipment causes harmful interference to radio or television reception, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures.

 Reorient or relocate the receiving antenna of the device which may be causing the

interference.

 Increase the separation between the screen and the device’s receiver.

 Connect the equipment into a dierent power outlet other than the device.

Pre-Installation

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.

3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign

particles such as dust, sawdust, and/or liquids.

NOTE

Regardless of the mounting method, the screen should be securely supported so that the vibration or

pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure

that the fasteners used are of adequate strength and suitable for the installation location.

Hardware Parts List

Please make sure all parts listed below are included before proceeding with the installation.

A.M10*Suspended Hook x 4 pcs

B. 20cm*Bubble leveler x1pc

Produkt Specifikationer

Mærke:	Elite
Kategori:	Projektionslærred
Model:	Saker Plus SK200XVW2

Har du brug for hjælp?

Hvis du har brug for hjælp til Elite Saker Plus SK200XVW2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Projektionslærred Elite Manualer

Elite Saker Plus SK200XVW2 Manual

15 August 2024

Projektionslærred Manualer

Nyeste Projektionslærred Manualer

Da-Lite Cinema Vision Manual

1 Oktober 2024

Da-Lite Perm-Wall 78676 Manual

26 September 2024

Draper Clarion Manual

22 September 2024

Pyle PRJSM1006 Manual

19 September 2024

Draper Luma 207008 Manual

6 September 2024

EPV PGF106WH1-A4K Manual

5 September 2024

EPV PGF84WH1 Manual

5 September 2024

KHOMO GEAR GER-1252 Manual

4 September 2024

KHOMO GEAR GER-1273 Manual

4 September 2024

Draper DR230109 Manual

4 September 2024