Epcom X67-R Manual

Epcom Ikke kategoriseret X67-R

Læs gratis den danske manual til Epcom X67-R (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Epcom X67-R, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Operation and Maintenance

To be able to manipulate the equipment, it is necessary to connect

the harness of the lightbar with the harness of the X303 controller,

making sure they are correctly connected until a click is heard.

It is recommended to periodically check the mounting bolts to

avoid any accidents.

Use mild soap and a soft cloth to clean the plastic

covers.

Note: Do not use gasoline or other organic solvents to clean the

plastic cover, otherwise they will crack or become opaque.

Content

•Lightbar X67RB 1 Pz

• Controller X 1 Pz 303

• 1 Pz Hook Mount

We are not responsible:

1) .Hits or scratches during use

2) If they use the wrong voltage.

3) By using a chemical to perform some maintenance

and / or cleaning of the equipment.

User Manual

Lightbar

X67RB

INTRODUCTION

Thank you for choosing our lightbar, which managesX67RB

70 Brilliant LED Gen III (Generation III); In order to meet your

needs and ensure excellent performance.

The X67RB lightbar, handles the highest LED technology, high

brightness, low power consumption and long service life.

Please read the manual before installing the lightbar, toX67RB

avoid damage due to improper use.

Technical Data

• Voltage: 12VDC

• Co : 12 A Max nsumption

• -40 55°C Temperature：～

• : 13 Flash Patterns

• Dim sions: 1en 18cm x 34cm x 12cm

Power Supply Connnection

• Red Cable: VCC

• Black Cable: GND

C X 3 ontroller 30

Selector 1.- 4 : Has positions

1. Lightbar OFF

2. Turn on 1 red module and 1 blue module both from

the rear.

3. Turn on 1 red module and 1 blue module on the front;

2 red modules and 2 blue modules on the back.

4. They light 2 red modules and 2 blue modules on the front;

3 red modules and 3 blue modules on the back of the bar.

Switch 1.- Allows changing the type of lights pattern.

Switch 2.- It allows to light the left alleyway light.

Switch 3.- It allows to turn on the penetration lights.

Switch 4.- It allows to light the right alleyway light.

Selector 2.- This selector allows you to manipulate the Signal

master of the lightbar, it has 4 positions:

1. Sig l Master Turn OFF na

2. Addressing from right to left

3. Addressing from left to right

4. Addressing the center out

Produkt Specifikationer

Mærke:	Epcom
Kategori:	Ikke kategoriseret
Model:	X67-R

Har du brug for hjælp?

Hvis du har brug for hjælp til Epcom X67-R stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Epcom Manualer

Epcom X67-R Manual

29 August 2024

Epcom X303N Manual

29 August 2024

Epcom XLL-1088-RB Manual

29 August 2024

29 August 2024

29 August 2024

29 August 2024

29 August 2024

29 August 2024

29 August 2024

29 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025

Garritan Harps Manual

14 Juni 2025

Marshall CV-H20-HF Manual

14 Juni 2025

Aiphone IXW-MAA Manual

14 Juni 2025

Rival HM-743 Manual

14 Juni 2025

Lutec Avony Manual

14 Juni 2025

Giordani G-SAFE & PLAY Manual

14 Juni 2025

Gourmia GAF799 Manual

14 Juni 2025

Arendo 307503 Manual

14 Juni 2025

Hughes & Kettner Tube 100 Manual

14 Juni 2025