Epson M-Tracer MT500G II Manual

Epson Smartwatch M-Tracer MT500G II

Læs gratis den danske manual til Epson M-Tracer MT500G II (7 sider) i kategorien Smartwatch. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Epson M-Tracer MT500G II, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/7
Start Here
Type: MT500G II
Model: M-S751
© 2014 Seiko Epson Corporation
All rights reserved.
Printed in Japan, 12/14
Read these instructions before using your product.
This information is subject to change without notice.
Introduction
This product analyzes golf swings based on extensive measurements and scientic
analysis. The analysis results, which can be easily checked on your mobile device,
are useful in helping you improve your game.
The following mobile devices are supported:
• iPhone 5, iPhone 5s, iPhone 5c, iPhone 6, iPhone 6 Plus, iPod touch (5th
generation) with iOS 7 or later
• Mobile device running Android™ 4.0 or later with Bluetooth SPP
What’s in the Box
M-Tracer
Micro USB
charging cable
Strap Warranty
Attachment
L size
(3 marks)
M size
(2 marks)
S size
(1 mark)
The supplied micro USB cable is designed specically for this product. Only use it
to charge this product.
The strap comes attached to the M-Tracer.
Attachment Sizes:
Size Grip circumference
L 2.44~2.71 in. (62~69 mm)
M 2.28~2.40 in. (58~61 mm)
S 2.12~2.24 in. (54~57 mm)
1. Part Names and Functions
Status LED (blue and red)
The lamp ashes to indicate the status of the product.
For more details, see the in-app help.
Charging LED (orange)
On: Charging
O: Charging complete
Top View
Bottom View
Power button
Turns the power on/o
Micro USB charging port and cover
Open the cover to charge the device.
Reset button
Strap hole
Meaning of Status LEDs
Status Display
Turning on The blue LED turns on for one second and ashes
once every two seconds.
Communicating The blue LED ashes twice every two seconds.
Turning o The blue LED turns on and then turns o.
No battery power The red LED ashes once every 5 seconds.
When turning on, the blue LED is on for one second,
then the red LED ashes once.
Pairing mode The blue and red LED ash alternately.
Error The red LED ashes once a second.
Hardware error The red LED turns on for ve seconds and then
turns o for half a second repeatedly.
Please refer to the in-app help for additional information about the LED display.
2. Charging the Battery
Before using your product for the rst time, make sure the battery is fully charged. To charge
the product, insert the USB plug into a power source.
You can use:
• Optional USB AC adapter (part number: E12E204001)
• Computer (using a USB port)
Turn o the product before charging.
Micro charging USB cable
(AC adapter not included)
The orange LED turns on when the product is charging and off when charging is
complete.
NOTE
• Stop charging the product even when charging is not nished after 3 hours.
• The battery may not charge correctly if you are using a charger other than the specied
AC adapter.
• Charging may not nish if your computer is in Sleep or Stand-by mode.
• Connect the micro USB charging cable directly to your computer, not to a USB hub.
3.
Connecting to a Mobile Device
To use this product, you need to pair it to a mobile device using a Bluetooth
connection.
1 Place the product within 3 feet (1 m) of the mobile device.
2 With the product turned off, hold down the power button for at least five
seconds to turn on the product and enter pairing mode.
When the product is in pairing mode, the status LED ashes blue and red
alternately.
3 Turn on Bluetooth on your mobile device.
Example: [Settings] - [Bluetooth] - [ON]
4 On your mobile device, tap “MT + last 5 digits of the serial number” in the list
of detected Bluetooth devices.
(Example: MT12345)
When pairing is complete:
iOS, the status LED ashes blue twice every two seconds.
Android, the status LED continues ashing blue and red alternately. Your mobile
device displays “MT + last 5 digits of serial number” as a detected device.
NOTE
The serial number is printed on the sticker on the back of the product.
If you plan to use the product with different mobile devices, you’ll need to pair again.
4. Installing the Appl

Produkt Specifikationer

Mærke: Epson
Kategori: Smartwatch
Model: M-Tracer MT500G II

Har du brug for hjælp?

Hvis du har brug for hjælp til Epson M-Tracer MT500G II stil et spørgsmål nedenfor, og andre brugere vil svare dig


Smartwatch Epson Manualer

Epson

Epson Moverio BT-40 Manual

31 August 2024
Epson

Epson Moverio BT-45C Manual

2 August 2024
Epson

Epson Moverio BT-200 Manual

1 August 2024
Epson

Epson M-Tracer MT500G II Manual

28 Juli 2024
Epson

Epson BO-QC350 Manual

19 Juli 2024
Epson

Epson Moverio BT-35E Manual

8 Juli 2024
Epson

Epson Pulsense PS-100 Manual

14 November 2023
Epson

Epson Moverio BT-300 Manual

30 Juni 2023
Epson

Epson Moverio BT-45CS Manual

11 April 2023
Epson

Epson Moverio BT-35ES Manual

23 December 2022

Smartwatch Manualer

Nyeste Smartwatch Manualer

Celly

Celly Kidswatch4G Manual

16 Juni 2025
Sekonda

Sekonda Flex Plus 40667 Manual

15 Juni 2025
Celly

Celly TRAINERMATE2 Manual

15 Juni 2025
Tracer

Tracer SM6 Opal Manual

15 Juni 2025
Tracer

Tracer SMK12 Stellar Manual

15 Juni 2025
Sekonda

Sekonda Active Pro 30238 Manual

15 Juni 2025
Tracer

Tracer SM10S Leo Manual

14 Juni 2025
BEMI

BEMI Kizzo Manual

10 Juni 2025
BEMI

BEMI Play2 Manual

10 Juni 2025
BEMI

BEMI Exo Manual

9 Juni 2025