EXSYS EX-62035M-SFP Manual

EXSYS Ikke kategoriseret EX-62035M-SFP

Læs gratis den danske manual til EXSYS EX-62035M-SFP (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om EXSYS EX-62035M-SFP, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Redundant power supply possible to reduce operational failure.
ATTENTION!
Please pay attention to the correct polarity!
Never connect the power supply to the terminal block
while it is switched on!
Never connect the negative terminal to the earth of the
unit. (EGND)
6
5
AUFBAU
CONNECTORS & STATUS LED HARDWARE INSTALLATION
Switzerland:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
Italy:
EXSYS Italia Srl
Via Belvedere, 45/B
I 22100 Como -
www.exsys.it
Anleitun
E 62035M SF
Der wohl kleinste industrietaugliche 10 Port Gigabit Web Managed Switch EX SFP - - -62035M-
bietet trotz seiner geringen Aussenmaße volle Gigabit Leistung an allen Ports. Die beiden SFP-
Slots ermöglichen die Einbindung in ein Glasfaser Netzwerk. Passende SFP Transceiver sind - -
als Zubehör erhältlich. Dank dem robusten Metallgehäuse und dem erweiterten
Betriebstemperaturbereich von 40°C bis 80°C ist er für eine Vielzahl von Anwendungen auch in -
rauen Umgebungen geeignet. Die Stromversorgung erfolgt über den Terminal Block (12-
48VDC) und kann zur Verminderungen von Betriebsausfällen auch redundant erfolgen.
Kompatibilität: Gigabit Ethernet 10/100/1000Base T -
Betriebssysteme: Alle Betriebssysteme
Anschlüsse: 8x RJ45 Buchse, 2 SFP Slot 1x Terminal Block 12 48VDC - x -, -
Lieferumfang: SFP, DIN Rail Kit, Wandmontagehalterung, EX-62035M- -
Anleitung
12- -48V T Block für optional
erhältliches Netzteil
Status LEDs 8x RJ45
100/1000 Mbit/s
2x SFP Slot
100/1000 Mbit/s
Status LEDs
12V to 48V T Block:-
RJ45 Port:
Switch off the power supply before disconnecting modules or wires.
The propper power supply voltage is indicated on the product label. Check the voltage of your
power source to ensure you are using the correct voltage. use a voltage higher than DO NOT
what is specified on the product.
SFP Transceivers are a Class 1 Laser/LED product.
To avoid causing serious damage to your eyes, do not stare directly into the
laser beam.
NOTICE & CLEANING
Please read the following installation instructions.
1. 62035M -Install the EX - - SFP on a mounting rail using the DIN Rail kit.
2. If required, insert optional SFP transceivers into the SFP slots.
3. Connect your network devices to the switch using a network cable.
4. If required, connect the fiber optic cable for the connection to the media converter or switch
to the SFP transceiver(s) used.
CAUTION! Do not look directly into the laser beam of the fiber optic connector!
5. Connect the power connector of the optionally available power supply to the terminal block
and switch on the power supply.
6. After the power is turned on, the PWR indicator lights up. If the indicator does not light up,
check that it is connected to the power supply correctly.
7. When all cables are connected correctly, the indicators light up according to the port status
of the LEDs (page 5).
SFP slot:
ATTENTION!
SFP Transceivers are a Class 1 Laser/LED product.
To avoid causing serious damage to your eyes, do not
stare directly into the laser beam.
Link / Activity LED
PoE LED
Status LEDs:
LED Name Color LED Function
Link (ACT) Yellow
On: Linked
Flashing: Data Transmission
Speed (SPD) Green
On: 1000 Mbit/s
Off: 10/100 Mbit/s
FX 9+10
Green
On: Fiber linked
Flashing: Data Transmission
SYS Green
Flashing: System is running
Off: System failure / Switch off
PWR Green
On: Switch is powered
Off: No power supply connected
FX 10 LED
To clean the device, please use only a dry, non fibrous cloth and remove the dirt with light -
pressure. In the area of the connections, please make sure that no fibers of the cloth are left in
the socket.
Attention! Never use a moist or wet cloth for cleaning!
PWR LED
FX 9 LED
SYS LED
87654321
RJ45 Port
Pin Signal Pin Signal Pin Signal
1 BI_DA+ 4 BI_DC+ 7 BI_DD+
2 BI_DA 5 BI_DC 8 BI_DD - - -
3 BI_DB+ 6 BI_DB -
BESCHREIBUNG & TECHNISCHE DATEN
MANAGEMENT
Make sure that the IP addresses of the switch and the PC are in the same network segment to
access the switch via the web. The default IP address of the switch is .192.168.1.6
Open your browser, type the switch's IP address 192.168.1.6 in the address bar and press
'Enter'.
In the user login pop up window, enter the following username and password.-
Username: admin
Password: admin
After confirming your login, you will be taken to the main page of the switch, where you can
change the settings to suit your needs.
≠
V-
V -V+ V -V+

Produkt Specifikationer

Mærke: EXSYS
Kategori: Ikke kategoriseret
Model: EX-62035M-SFP

Har du brug for hjælp?

Hvis du har brug for hjælp til EXSYS EX-62035M-SFP stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret EXSYS Manualer

EXSYS

EXSYS EX-44344 Manual

23 September 2025
EXSYS

EXSYS EX-44343 Manual

23 September 2025
EXSYS

EXSYS EX-45032IS Manual

24 Juli 2025
EXSYS

EXSYS EX-42034 Manual

24 Juli 2025
EXSYS

EXSYS EX-1311VIS Manual

24 Juli 2025
EXSYS

EXSYS EX-47925 Manual

24 Juli 2025
EXSYS

EXSYS EX-47200 Manual

23 Juli 2025
EXSYS

EXSYS EX-1305 Manual

23 Juli 2025
EXSYS

EXSYS EX-40032 Manual

23 Juli 2025
EXSYS

EXSYS EX-1332HMV Manual

23 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MSW

MSW PROPULLATOR 2500MH Manual

3 November 2025
ANCEL

ANCEL HD3200 Manual

3 November 2025
Lantronix

Lantronix C3220 Manual

3 November 2025
Cooler Master

Cooler Master MasterBox MB511 Manual

3 November 2025
Klarstein

Klarstein La Palma 750 Smart Manual

3 November 2025
ANCEL

ANCEL AD610 Elite Manual

3 November 2025
ErgoAV

ErgoAV ERIWA1-01W Manual

3 November 2025
QOLIXm

QOLIXm YQAWSL-6A4U Manual

3 November 2025
ANCEL

ANCEL AJ400 Manual

3 November 2025
Emerson

Emerson ITL9907RE Manual

3 November 2025