Fantini Cosmi K55A Manual


Læs gratis den danske manual til Fantini Cosmi K55A (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Fantini Cosmi K55A, eller vil du spørge andre brugere om produktet?

Side 1/5
1
K55A-K65A
SELF-ADJUSTING HEATING CABLES
TO MAINTAIN THE TEMPERATURE
OF FLUIDS - HIGH TEMPERATURE SYSTEMS
Suitable for maintaining the
temperature of liquids in the pipes,
for example, domestic hot water
a temperature above 70°C,
thereby avoiding the formation of
Legionellosis bacteria
Optimisation of energy
consumption thanks to the self-
adjusting feature of the cable
HEATING CABLES
CODE Cable
length
Power Maximum
room
temperature
powered
Maximum
room
temperature
not powered
Minimum
installation
room
temperature
Maximum length
of the heating circuit
from the supply point
K55A100 100 m 9 W/m 55 °C 80 °C 100 °C -20 °C 130 m
K65A100 100 m 13 W/m 65 °C 80 °C 100 °C -20 °C 110 m
OPERATION
The heat emission varies automatically without
control thermostats being used. They are based
on the property of some polymers, with which the
conductors are insulated, to vary their resistance
according to the temperature which they are
subjected to;
Using a thermostat (L03BI1A) allows periodic
heating of the system to be guaranteed or to
maintain the system temperature constant.
HOMOLOGATION AND STANDARDS
CSTB
2
K55A-K65A - SELF-ADJUSTING HEATING CABLES TO MAINTAIN THE TEMPERATURE OF FLUIDS
HIGH TEMPERATURE SYSTEMS
INSTALLATION
The heating cable can be secured linearly according
to the diameter of the pipe;
The cable can be cut to the desired length directly
during installation;
Minimum bending radius: 27 mm;
The power of a metre of cable varies with the room
temperature;
The total power depends on the length of the
heating cable. The heating core is active along the
entire length of the cable, therefore, a cold tail end
must be created so as to have a section with cold
terminals (using the KIT2A);
Secure the cable to the pipe with the relevant fixing
tape K50 for steel pipes or K50AL for plastic pipes;
It is advisable to apply an insulating coating over
the heating cable for an effective system.
Ø PIPE INSULATION THICKNESS
mm
inches mm
10 1/2 19
20 3/4 19
25 1 19
32 1/4 25
40 1 1/2 30
50 2 40
60 2 1/5 50
The table shows the insulation thickness that is required to ensure
the temperature in stainless steel and galvanised steel pipes is
maintained with a minimum room temperature of +18°C and a
thermal conductivity coefficient of 0.035 W/m.
Power supply 230V-50Hz
Power delivered K55A100
22.5 W/m at 0°C
9 W/m at 55°C
K65A100
31.5 W/m at 0°C
13 W/m at 65°C
ELECTRICAL FEATURES
45
40
35
30
25
20
15
10
5
0
0 20 40 60 80 100
Pipe temperature °C
Power W/M
K65A
K55A


Produkt Specifikationer

Mærke: Fantini Cosmi
Kategori: Ikke kategoriseret
Model: K55A

Har du brug for hjælp?

Hvis du har brug for hjælp til Fantini Cosmi K55A stil et spørgsmål nedenfor, og andre brugere vil svare dig