Fischer FZA 10 x 40 M 6/10 Manual

Fischer Ikke kategoriseret FZA 10 x 40 M 6/10

Læs gratis den danske manual til Fischer FZA 10 x 40 M 6/10 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Fischer FZA 10 x 40 M 6/10, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Installation Instructions fischer Zykon-Anchor

Push-through installation

FZA-D

Pre-positioned installation

FZA

FZA-I

Create a drill hole at right angles to the surface of the

anchor base with a hammer drill, using the correspond-

ing Zykon universal drill bit FZUB. The required drill

depth is reached once the FZUB depth stop meets the

concrete.

Clean drill hole;

blow out or clean with a vacuum cleaner.

Create a drill hole through the installation object at right

angles to the surface of the anchor base with a hammer

drill, using the corresponding Zykon universal drill bit

FZUB. The required drill depth is reached once the FZUB

depth stop meets the concrete.

Once the FZUB depth stop meets the concrete, create

the drill hole undercut by making circular swivelling

movements with the hammer drill while the ham-

mer mechanism is engaged. Press the hammer drill

firmly against the fixture; 1–2 swivelling movements

is sufficient for

∅

14 mm, with 3–5 movements for

∅

18 mm and

∅

22 mm.

Once the FZUB depth stop meets the concrete, create

the drill hole undercut by making circular swivelling

movements with the hammer drill while the hammer

mechanism is engaged. Press the hammer drill firmly

against the anchor base; 1–2 swivelling movements

is sufficient for

∅

14 mm, with 3–5 movements for

∅

18 mm and

∅

22 mm.

Clean drill hole;

blow out or clean with a vacuum cleaner.

Insert the anchor into the drill hole and then drive the

expansion sleeve in with hammer-set device FZE Plus,

using a manual hammer. The anchor sleeve sits

min. 1 mm behind the surface of the attachment (see

picture 5).

Mount installation object (e.g. anchor plate), washer and

nut or screw (for FZA-I) and apply installation torque

with torque spanner.

Mount installation object (e.g. anchor plate), washer and

nut or screw (for FZA-I) and apply installation torque

with torque spanner.

The thickness of the fixture have to fullfill the terms of

the related approval.

FZA

FZA-D

FZA-I

ETA-98/0004, FZA,

FZA A4, FZA C

* Approval Z-21.1-1646 covers the following anchor types:

FZA: FZA 10 x 40 M 6, FZA 12 x 40 M 8, FZA 14 x 40 M 10 in galvanised steel and stainless steel A4.

FZA-I: FZA 12 x 40 M 6 I, FZA 14 x 60 M 8 I, FZA 18 x 80 M 10 I in galvanised steel and stainless steel A4.

The anchor is correctly expanded if the green colour on

the thread of the tapered bolt is visible.

The anchor is correctly expanded if the green colour on

the thread of the tapered bolt is visible (FZA) or the

gap u (FZA-I) (when installed acc. to table 8, annex 7)

is fulfilled.

Insert the anchor into the drill hole and then drive the

expansion sleeve in with hammer-set device FZE Plus,

using a manual hammer. The anchor sleeve sits min.

1 mm behind the surface of the concrete (see picture 5).

Installing the FZA-I with internal thread the centring pin

FZE-I should be used additionally.

The regulations of the building-authority approvals ETA-98/0004 and respectively Z-21.1-1646 have to be observed.

From thread M10

Shock-tested/

BZS approval for

shock-resilient

fixings in civil

defence areas.

Z-21.1-1646

For extraordinary actions e.g. in

nuclear power plants. See approval

for anchor types*.

Integral depth stop The Zykon Universal drill FZUB drills a geometri cally

exact undercut drill hole in one operation without

tool change.

The FZUB fits into all hammer drills with “SDS-Plus”

chuck system and offers the same capacity and tool

life. A feature of this drill is its new geometrical form

and integral depth stop. These characteristics pro -

duce the simple and economical undercut drill hole.

One operation:

cylindrical drilling – swivel undercut.

SDS-Plus chuck system

Drilling and setting tools Suitable for fixing types Material: zinc plated, passivated steel,

Qty.

   stainless steel A4 and high corrosion-resistant steel 1.4529

per

Type Art. No. Bolt anchor Through anchor Internally-threaded anchor pack

 FZUB10x40 60622 FZA10x40M6 –––––––– –––––––– 1

 FZUB12x40 60623 FZA12x40M8 –––––––– FZA12x40M6I 1

 FZUB12x50 60627 FZA12x50M8 FZA12x50M8D/10 FZA12x50M6I 1

 FZUB12x60 60625 –––––––– FZA12x60M8D/10 –––––––– 1

 FZUB12x80 60626 –––––––– FZA12x80M8D/30 –––––––– 1

 FZUB14x40 60624 FZA14x40M10 –––––––– –––––––– 1

 FZUB14x60 60628 FZA14x60M10 –––––––– FZA14x60M8I 1

 FZUB14x80 60629 –––––––– FZA14x80M10D/20 –––––––– 1

 FZUB14x100 60630 –––––––– FZA14x100M10D/40 –––––––– 1

 FZUB18x80 60634 FZA18x80M12 –––––––– FZA18x80M10I 1

 FZUB18x100 60632 –––––––– FZA18x100M12D/20 –––––––– 1

 FZUB18x130 60633 –––––––– FZA18x130M12D/50 –––––––– 1

 FZUB22x100 60636 FZA22x100M16 –––––––– FZA22x100M12I 1

 FZUB22x125 60638 FZA22x125M16 FZA22x125M16D/25 FZA22x125M12I 1

 FZEPlus10

 44637 FZA10x...M6 –––––––– –––––––– 1

 FZEPlus12 44638 FZA12x...M8 FZA12x...M8D FZA12x...M6I 1

 FZEPlus14 44639 FZA14x...M10 FZA14x...M10D FZA14x...M8I 1

 FZEPlus18 44640 FZA18x...M12 FZA18x...M12D FZA18x...M10I 1

 FZEPlus22 44641 FZA22x...M16 FZA22x...M16D FZA22x...M12I 1



The correct installation of fischer Zykon anchors in accordance with the official

approval is possible only with the following original fischer Zykon tools.

Setting tool

FZE Plus

Zykon Universal drill FZUB

withoutcentringpin

Produkt Specifikationer

Mærke:	Fischer
Kategori:	Ikke kategoriseret
Model:	FZA 10 x 40 M 6/10

Har du brug for hjælp?

Hvis du har brug for hjælp til Fischer FZA 10 x 40 M 6/10 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Fischer Manualer

Fischer TherMax 16/170 M12 Manual

30 Juli 2025

Fischer FIS DB SL Pro Manual

19 Juli 2025

Fischer FIS DB S Pro Manual

19 Juli 2025

Fischer TherMax 10/140 M6 Manual

16 Juli 2025

Fischer TherMax 10/160 M8 Manual

16 Juli 2025

Fischer FIS P 300 T Manual

18 Juni 2025

Fischer FZA 10 x 40 M 6/10 Manual

18 Juni 2025

Fischer FIS EM Plus 1500 S Manual

18 Juni 2025

Fischer FIS EM Plus 390 S HWK big Manual

17 Juni 2025

Fischer FIS RC II 360 S Manual

17 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Adj Event Bar Q4 Manual

14 August 2025

Bartscher A114003 Manual

14 August 2025

Swann SRNHD-888MSDWB2 Manual

14 August 2025

Adj Flashback 4 Manual

14 August 2025

Panduit FO6CB Manual

14 August 2025

Renkforce RF-WAT-300 Manual

14 August 2025

American Audio ETR 1000R Manual

14 August 2025

Swann SWIFI-MPRST Manual

14 August 2025

American Audio SENSE8 Manual

14 August 2025

Adj Vortex 1200 Manual

14 August 2025