
7. RCA analogue Line output
Connect analogue RCA interconnects to an amplifier.
8. USB-C a o and power inputudi
This is a USB-C input. It connects UNO to the computer or
phone audio source and can also be powered by it.
Plays up to 32-bit 384kHz PCM, DSD256 and is an MQA
Note: For use with PC it is necessary to download drivers.
Tip: For the required driver and all the latest firmware updates please visit our
website: https://i-audio.com/download-hub/
Thank you for purchasing the UNO. The UNO is a USB -audio
This button selects the following EQ modes. The colour of the
EQ mode LED on top (item 6) indicates the selection.
PowerMatch setting should be off for IEMs and on for
Warning: Due to the high power of UNO, before changing the PowerMatch setting,
always start off at a low volume level so that there is no risk of damage to your
headphones, speakers or your hearing. iFi audio is not responsible for any hearing or
equipment damage from misuse.
3. Power ON/OFF and Volume control
This is the power switch and volume control knob.
4. Audio Format LED (kHz)
The LED colour scheme indicates the audio format and sampling
frequency received by UNO from the music source.
Green PCM 44.1/48/88.2/96kHz
Yellow PCM 176.4/192/352.8/384kHz
5. S-Balanced 3.5mm headphone output
Connect 3.5mm stereo headphones. Compatible with both
TRS and TRRS confiurations.
The LED colour scheme indicates the UNO's EQ mode, please
Power supply requirement:
*12 months typical or as permitted/required by local reseller laws.
**Specifications are subject to change without notice.
Bit-Perfect DSD & DXD DAC by ESS
≥2.6V / 3.5V max. at 32 Ω / 300 Ω
≥211mW @ 32Ω; 39mW @ 300Ω
88 (3.5 x m x 81 26 m " x 2.8" x 1.0")