JL Audio Stealthbox SB-POL-GNRLSPKR/MX650 Manual

JL Audio Ikke kategoriseret Stealthbox SB-POL-GNRLSPKR/MX650

Læs gratis den danske manual til JL Audio Stealthbox SB-POL-GNRLSPKR/MX650 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 77 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 39 anmeldelser. Har du et spørgsmål om JL Audio Stealthbox SB-POL-GNRLSPKR/MX650, eller vil du spørge andre brugere om produktet?

Side 1/5
Thank you for choosing a JL Audio Stealthbofor your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your
authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble and reassemble
your vehicle properly. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
If you choose to perform the installation yourself, it is absolutely
vital that the Stealthbox® be properly mounted to the vehicle
according to these instructions. Failure to mount the enclosure
properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the
enclosure caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a
collision or sudden deceleration.
INSTALLATION
DIFFICULT Y:
ESTIMAT ED TIME:
1-2 HOURS
Continued on Next Page
25
OUT
OF
SB-POL-GNRLSPKR/MX650 INSTR_SKU# 011502
I N S T A L L A T I O N G U I D E
for the
SB-POL-GNRLSPKR/MX650
SKU# 94657
2016 & Up Polaris General
Enclosure Type: Sealed
Driver Type: MX650-CCX-SG-TLD-B
Nominal Impedance: 4 ohms
Continuous Power Handling: 60 watts (RMS method)
I N C LU D E D H AR D WA R E / W I R I N G I N FO R M AT I O N
Continued on Next Page
Page 2 • JL Audio, Inc., 2017
SB-POL-GNRLSPKR/MX650 INSTR_SKU# 011502
Note: For optimum performance, JL Audio recommends applying the included Foam Strips (or sound damping material) to surrounding plastic panels to reduce unwanted vibrations.
(hardware pictured for one)
Wire Size Wire Color Use
16 AWG Red/Stripe Speaker Positive (+)
Black/Stripe Speaker Negative (-)
20 AWG
Red Not Used
Green Not Used
Blue LED Positive (+)
Yellow LED Negative (-)
BOM ID DescriptionQty SKU
1 2 152414 Wire Harness (10’)
2 2 153729 1/4 - 20 x 1” Serrated Flange Head Bolt
3 2 153817 1/4” Stainless Steel Flat Washer
4 2 153815 1/4 - 20 Nylon Insert Locknut
- 1 150778 Fuse & Fuse Holder Kit (not shown)
- 1 150249 Foam Tape (not shown)
LED Wire Connections
For short-circuit protection, install a supplied fuse holder onto EACH
speaker’s BLUE (+12V) LED power connection lead.
Connect all BLUE (+12V) leads together (parallel) and connect to a
switched +12V supply. Connect all YELLOW (GRD) leads together and
connect to a negative ground or to the NEGATIVE battery post.
We recommend activating the speakers’ LEDs thru a lighting circuit that
supplies +12V via an existing switch. If an existing switched circuit is
not available, you may install a dedicated toggle/rocker style switch that
will supply positive (+12V) power. Fuse this connection according to how
many LED circuits you have (LED circuits x 150A).
[ D ]GN
LED
[+12V]
lue
ellow
lue
ellow
Blue
Yellow
Blue
Yellow
LED
Fuse
Fuse
Fuse
Diagram shows one speaker pair of
LED circuits connected in parallel.


Produkt Specifikationer

Mærke: JL Audio
Kategori: Ikke kategoriseret
Model: Stealthbox SB-POL-GNRLSPKR/MX650

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio Stealthbox SB-POL-GNRLSPKR/MX650 stil et spørgsmål nedenfor, og andre brugere vil svare dig