JUNG 1731DD Manual

JUNG Lysdæmper 1731DD

Læs gratis den danske manual til JUNG 1731DD (8 sider) i kategorien Lysdæmper. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om JUNG 1731DD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

LB management

LB managementLB management

Universal rotary dimmer LED

Universal rotary dimmer LEDUniversal rotary dimmer LED

Art. no.: 1731DD

Operating instructions

Operating instructionsOperating instructions

11 Safety instructions

Safety instructions

Safety instructionsSafety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the device or load.

Danger of electric shock. Always disconnect before carrying out work on the device or load.Danger of electric shock. Always disconnect before carrying out work on the device or load.

Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load

Danger of electric shock. Device is not suitable for disconnection from supply voltage. The loadDanger of electric shock. Device is not suitable for disconnection from supply voltage. The load

is not electrically isolated from the mains even when the device is switched off.

is not electrically isolated from the mains even when the device is switched off.is not electrically isolated from the mains even when the device is switched off.

Risk of destruction if the set operating mode and load type do not match. Set correct operating

Risk of destruction if the set operating mode and load type do not match. Set correct operatingRisk of destruction if the set operating mode and load type do not match. Set correct operating

mode when connecting or exchanging the load.

mode when connecting or exchanging the load.mode when connecting or exchanging the load.

Fire hazard. For operation with inductive transformers, each transformer must be fused on the

Fire hazard. For operation with inductive transformers, each transformer must be fused on theFire hazard. For operation with inductive transformers, each transformer must be fused on the

primary side in accordance with the manufacturer's instructions. Only safety transformers ac-

primary side in accordance with the manufacturer's instructions. Only safety transformers ac-primary side in accordance with the manufacturer's instructions. Only safety transformers ac-

cording to EN 61558-2-6 may be used.

cording to EN 61558-2-6 may be used.cording to EN 61558-2-6 may be used.

These instructions are an integral part of the product, and must remain with the end customer.

These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.

22 Intended use

Intended use

Intended useIntended use

– Switching and dimming of lighting

– Mounting in appliance box according to DIN 49073

– Operation with suitable cover

33 Product characteristics

Product characteristics

Product characteristicsProduct characteristics

Product characteristics

Product characteristicsProduct characteristics

– Device works according to the leading edge phase control or trailing edge phase control

principle

– Automatic or manual setting of the dimming principle suitable for the load

– Display of the set operating mode by means LED

– Operation without neutral conductor possible

– Switch-on via bulb-preserving soft start

– Switch on with last saved brightness or saved switch-on brightness

– Switch-on brightness can be saved permanently

– Minimum brightness can be saved permanently

– Connection of extensions possible

– Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest

– Electronic over-temperature protection

– Hotel card function

Power extension possible by means of power boosters.

44 Operation

Operation

OperationOperation

Switching light or adjusting brightness

Switching light or adjusting brightnessSwitching light or adjusting brightness

Operation on the main device or a rotary dimmer extension is identical.

1 / 8

82598633 13.03.2020

J0082598633

LB management

LB managementLB management

Universal rotary dimmer LED

Figure1: Switching light or adjusting brightness

￭ Press the setting knob briefly: Light switches on or off (Figure 1).

￭ Turn the setting knob quickly: Brightness is changed quickly (Figure 1).

￭ Turn the setting knob slowly: Brightness is changed slowly (Figure 1).

Switching the light on at minimum or maximum brightness

Switching the light on at minimum or maximum brightnessSwitching the light on at minimum or maximum brightness

Figure2: Switching on the light at minimum or maximum brightness

￭ Turn the setting knob by a quarter turn, then press the setting knob briefly: Light switches

on at minimum brightness or maximum brightness (Figure 2).

Save switch-on brightness

Save switch-on brightnessSave switch-on brightness

￭ Adjust the brightness.

￭ Press the setting knob for longer than 4 seconds.

Switch-on brightness is saved. The lighting switches briefly off and on again as confirma-

tion.

Delete switch-on brightness

Delete switch-on brightnessDelete switch-on brightness

￭ Press the setting knob briefly: Light switches on at the saved switch-on brightness.

￭ Press the setting knob for longer than 4 seconds.

The switch-on brightness is deleted. Switching on takes place at the last brightness value

set. For confirmation, the light is switched off briefly and switched on again.

Operation using 2-wire or 3-wire extension with button cover or push-button

Operation using 2-wire or 3-wire extension with button cover or push-buttonOperation using 2-wire or 3-wire extension with button cover or push-button

￭ Press briefly: Light switches on or off.

￭ Press long with the light switched off: Switch on at minimum brightness.

￭ Press long with the light switched on: Set brightness. The dimming operation stops at the

appropriate end value.

Push-button: The dimming direction is changed with each new long actuation.

￭ Press the button cover over the entire surface for longer than 4 seconds with the light

switched on:

Save switch-on brightness. The lighting switches briefly off and on again as confirmation.

2 / 8

82598633 13.03.2020

J0082598633