JUNG 1730DD Manual

JUNG Lysdæmper 1730DD

Læs gratis den danske manual til JUNG 1730DD (6 sider) i kategorien Lysdæmper. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om JUNG 1730DD, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
LB management
LB management
LB management
LB managementLB management
Standard rotary dimmer LED
Standard rotary dimmer LED
Standard rotary dimmer LED
Standard rotary dimmer LED
Standard rotary dimmer LEDStandard rotary dimmer LED
Art. no.: 1730DD
Operating instructions
Operating instructions
Operating instructions
Operating instructionsOperating instructions
1
1
1
11 Safety instructions
Safety instructions
Safety instructions
Safety instructionsSafety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or load.
Danger of electric shock. Always disconnect before carrying out work on the devise or load.
Danger of electric shock. Always disconnect before carrying out work on the devise or load.
Danger of electric shock. Always disconnect before carrying out work on the devise or load.Danger of electric shock. Always disconnect before carrying out work on the devise or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The loadDanger of electric shock. Device is not suitable for disconnection from supply voltage. The load
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.is not electrically isolated from the mains even when the device is switched off.
Risk of destruction if the set operating mode and load type do not match. Set correct operating
Risk of destruction if the set operating mode and load type do not match. Set correct operating
Risk of destruction if the set operating mode and load type do not match. Set correct operating
Risk of destruction if the set operating mode and load type do not match. Set correct operatingRisk of destruction if the set operating mode and load type do not match. Set correct operating
mode when connecting or exchanging the load.
mode when connecting or exchanging the load.
mode when connecting or exchanging the load.
mode when connecting or exchanging the load.mode when connecting or exchanging the load.
Fire hazard. For operation with inductive transformers, each transformer must be fused on the
Fire hazard. For operation with inductive transformers, each transformer must be fused on the
Fire hazard. For operation with inductive transformers, each transformer must be fused on the
Fire hazard. For operation with inductive transformers, each transformer must be fused on theFire hazard. For operation with inductive transformers, each transformer must be fused on the
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
cording to EN 61558-2-6 may be used.
cording to EN 61558-2-6 may be used.
cording to EN 61558-2-6 may be used.
cording to EN 61558-2-6 may be used.cording to EN 61558-2-6 may be used.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.
2
2
2
22 Intended use
Intended use
Intended use
Intended useIntended use
– Switching and dimming of lighting
– Mounting in appliance box according to DIN 49073
– Operation with suitable cover
3
3
3
33 Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
– Device works according to the leading edge phase control or trailing edge phase control
principle
– Automatic setting of the dimming principle suitable for the load
– Operation without neutral conductor possible
– Switch-on via bulb-preserving soft start
– Switch on with last saved brightness or saved switch-on brightness
– Switch-on brightness can be saved permanently
– Minimum brightness can be saved permanently
– Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
– Electronic over-temperature protection
Power extension possible by means of power boosters.
1 / 6
82598713 04.12.2018
J0082598713
LB management
LB management
LB management
LB managementLB management
Standard rotary dimmer LED
4
4
4
44 Operation
Operation
Operation
OperationOperation
Switching light or adjusting brightness
Switching light or adjusting brightness
Switching light or adjusting brightness
Switching light or adjusting brightnessSwitching light or adjusting brightness
Figure1: Switching light or adjusting brightness
￭ Press the setting knob briefly: Light switches on or off (Figure 1).
￭ Turn the setting knob quickly: Brightness is changed quickly (Figure 1).
￭ Turn the setting knob slowly: Brightness is changed slowly (Figure 1).
Switching the light on at minimum or maximum brightness
Switching the light on at minimum or maximum brightness
Switching the light on at minimum or maximum brightness
Switching the light on at minimum or maximum brightnessSwitching the light on at minimum or maximum brightness
Figure2: Switching on the light at minimum or maximum brightness
￭ Turn the setting knob by a quarter turn, then press the setting knob briefly: Light switches
on at minimum brightness or maximum brightness (Figure 2).
Save switch-on brightness
Save switch-on brightness
Save switch-on brightness
Save switch-on brightnessSave switch-on brightness
￭ Adjust the brightness.
￭ Press the setting knob for longer than 4 seconds.
Switch-on brightness is saved. The lighting switches briefly off and on again as confirma-
tion.
Delete switch-on brightness
Delete switch-on brightness
Delete switch-on brightness
Delete switch-on brightnessDelete switch-on brightness
￭ Press the setting knob briefly: Light switches on at the saved switch-on brightness.
￭ Press the setting knob for longer than 4 seconds.
The switch-on brightness is deleted. Switching on takes place at the last brightness value
set. For confirmation, the light is switched off briefly and switched on again.
5
5
5
55 Information for electrically skilled persons
Information for electrically skilled persons
Information for electrically skilled persons
Information for electrically skilled personsInformation for electrically skilled persons
5.1
5.1
5.1
5.15.1 Fitting and electrical connection
Fitting and electrical connection
Fitting and electrical connection
Fitting and electrical connectionFitting and electrical connection
DANGER!
Mortal danger of electric shock.
Mortal danger of electric shock.
Mortal danger of electric shock.
Mortal danger of electric shock.Mortal danger of electric shock.
Disconnect the device. Cover up live parts.
Disconnect the device. Cover up live parts.
Disconnect the device. Cover up live parts.
Disconnect the device. Cover up live parts.Disconnect the device. Cover up live parts.
2 / 6
82598713 04.12.2018
J0082598713

Produkt Specifikationer

Mærke: JUNG
Kategori: Lysdæmper
Model: 1730DD

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG 1730DD stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lysdæmper JUNG Manualer

JUNG

JUNG 1252UDE Manual

3 August 2024
JUNG

JUNG UD1755REG Manual

31 Juli 2024
JUNG

JUNG UD1255REG Manual

31 Juli 2024
JUNG

JUNG 247.07EB Manual

30 Juli 2024
JUNG

JUNG 1724DEB Manual

25 Juli 2024
JUNG

JUNG 1730DD Manual

13 Januar 2024
JUNG

JUNG CD5544.03V Manual

24 November 2023
JUNG

JUNG 1724DM Manual

28 Oktober 2023
JUNG

JUNG 1271LEDDE Manual

17 September 2023
JUNG

JUNG 1731DD Manual

8 September 2023

Lysdæmper Manualer

Nyeste Lysdæmper Manualer

InterBar

InterBar 8010 Manual

29 Januar 2025
Vimar

Vimar 20175 Manual

15 December 2024
Vimar

Vimar 19147 Manual

15 December 2024
Vimar

Vimar 19595.0 Manual

15 December 2024
Vimar

Vimar 16603.120.B Manual

15 December 2024
Vimar

Vimar 16604 Manual

15 December 2024
Vimar

Vimar 16609 Manual

15 December 2024
Vimar

Vimar 16625.B Manual

15 December 2024
Vimar

Vimar 16604.120.B Manual

15 December 2024
Vimar

Vimar 16601.B Manual

15 December 2024