JUNG 3093 TSM Manual

JUNG Ikke kategoriseret 3093 TSM

Læs gratis den danske manual til JUNG 3093 TSM (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om JUNG 3093 TSM, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/7
Push-button module with integrated BCU Standard / Universal
Universal push-button module with integrated BCU, 1-gang
Art.-No.: 3091 TSM
Universal push-button module with integrated BCU, 2-gang
Art.-No.: 3092 TSM
Universal push-button module with integrated BCU, 3-gang
Art.-No.: 3093 TSM
Universal push-button module with integrated BCU, 4-gang
Art.-No.: 3094 TSM
Universal push-button module with integrated BCU, 8-gang
Art.-No.: 3098 TSM
Universal push-button module with illuminated inscription field and integrated BCU, 1-gang
Art.-No.: 3091 TSML
Universal push-button module with illuminated incription field and integrated BCU, -gang
Art.-No.: 3092 TSML
Standard push-button module with integrated BCU, 1-gang
Art.-No.: 3071 TSM
Standard push-button module with integrated BCU, 2-gang
Art.-No.: 3072 TSM
Standard push-button module with integrated BCU, 3-gang
Art.-No.: 3073 TSM
Standard push-button module with integrated BCU, 4-gang
Art.-No.: 3074 TSM
Standard push-button module with integrated BCU, 8-gang
Art.-No.: 3078 TSM
Operationsmanual
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Electrostatic discharges can cause defects in the device. Use only the supplied plastic
screws.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper
understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database.
Planning, installation and commissioning of the device are carried out with the aid of KNX-
certified software. Full functionality with KNX commissioning software version ETS3.0d
onwards.
An updated version of the product database, technical descriptions and conversion programs
and other auxiliary programs are available on our Internet website.
Intended use
- Serving of user, e.g. light on/off, dimming, blinds up/down, brightness values,
temperatures, calling up and saving light scenes, etc.
- Installation in appliance box to DIN 49073
Product characteristics
- The push-button functions switching, dimming, controlling blinds, valuators, calling up
moods, etc., depending on the application selected
- Completion with button set
1/7
32558813
J:0082558813
19.06.2009
- A blue operation LED as an orientation light and to indicate the programming status
- Integrated bus coupling unit
Push button module standard:
- A red status LED for each control surface
Push button module Universal:
- One or two functions per control surface
- Push-button function or rockers function, vertical or horizontal
- Two red status LEDs for each control surface
- Optional with illuminated text field
Push-button module Universal 8-gang and Universal with illuminated inscription field:
- Room temperature detection
3 Operation
Serve function or user
Push button module Standard: Each operating button is divided into two halves, with a function
assigned to each of them. Operation depends on the specific function.
Push button module Universal: Depending on the programming, a control surface can have up
to three functions assigned to it – upper/left, lower/right, entire surface. Operation depends on
the specific function.
o Switching: Short press on the corresponding control surface.
o Dimming: Long press on the corresponding control surface. The dimming process ends
when the control surface is released.
o Move blinds: Long press on the corresponding control surface.
o Stop or adjust blinds: Short press on the corresponding control surface.
o Call up lighting scene: Short press on the corresponding control surface.
o Save lighting scene: Long press on the corresponding control surface.
o Set value, e.g. brightness or temperature setpoint: Short press on the corresponding
control surface.
4 Information for qualified electricians
4.1 Fitting and electrical connection
DANGER!
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live
parts in the working environment!
2/7
32558813
J:0082558813
19.06.2009
Push-button module with integrated BCU Standard / Universal

Produkt Specifikationer

Mærke: JUNG
Kategori: Ikke kategoriseret
Model: 3093 TSM

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG 3093 TSM stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret JUNG Manualer

JUNG

JUNG ZLLA5004M Manual

15 Juli 2025
JUNG

JUNG SC19 Manual

15 Juli 2025
JUNG

JUNG AL2539 Manual

15 Juli 2025
JUNG

JUNG 244-110 Manual

15 Juli 2025
JUNG

JUNG 1733DNE Manual

15 Juli 2025
JUNG

JUNG NRSCD0834 Manual

15 Juli 2025
JUNG

JUNG 1712DE Manual

15 Juli 2025
JUNG

JUNG CD2248 Manual

15 Juli 2025
JUNG

JUNG SIVM27 Manual

15 Juli 2025
JUNG

JUNG 506KO5EUD230 Manual

15 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Zoom

Zoom 9010 Manual

15 Juli 2025
Samsung

Samsung AR70F12D1BBXAP Manual

15 Juli 2025
CYP

CYP AU-D6-384 Manual

15 Juli 2025
Milwaukee

Milwaukee M18 FUEL ANGLER 2873-20 Manual

15 Juli 2025
CYP

CYP AU-11CA-4K22 Manual

15 Juli 2025
Krups

Krups KM4055 Manual

15 Juli 2025
DS18

DS18 TJ-SBAR Manual

15 Juli 2025
Inkbird

Inkbird INK-CO2W Manual

15 Juli 2025
DS18

DS18 BRO-CLPX/BK Manual

15 Juli 2025
DS18

DS18 SLG-AR6LD Manual

15 Juli 2025