Kicker IX 406 Impulse Manual

Kicker Bilradio IX 406 Impulse

Læs gratis den danske manual til Kicker IX 406 Impulse (12 sider) i kategorien Bilradio. Denne vejledning er vurderet som hjælpsom af 62 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 31.5 anmeldelser. Har du et spørgsmål om Kicker IX 406 Impulse, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
Congratulations! You have just purchased one of the latest in a long line of exceptional car audio power
amplifiersfrom Stillwater Designs. Your KICKER Impulse was designed and engineered by the same team which
created many other international award winning KICKER components like the ZR, ZX, and XS-Series amps. It
contains a number of cutting-edge features to give you outstanding performance and dependability when
installed in a properly designed system.
Thanks for buying KICKER. Enjoy.
KICKER IMPULSE AMPLIFIER FEATURES
Separate electronic crossovers are built in for convenience and allow you to select full range or highpass for front
and rear channels as well as full range or lowpass for the sub output.
The Kicker Impulse IX406 Amplifier is 2 Ohm stable on all six channels; the sub out can be bridged to as low as 4
Ohm mono. For connection to the source , you have the option of low level RCA inputs or a high level input for
use with radios that don’t have RCA outputs.
Separate KICKEQ bass and treble controls give you the ability to boost low and high frequencies to tailor the music
to your taste.
Auto-resetting short circuit and overthermal protection circuits are incorporated to protect the amplifier from
failure due to extreme conditions.
State of the art circuitry including MOSFET power supply and glass epoxy circuit boards are used to ensure many
years of trouble free operation.
IX406
Six-Channel Power Amplifier
Wiring
The preferred method of bringing input signal in to the amplifier is with RCA cables from a quality tape or CD
player. A high (speaker) level input signal may also be used if your factory deck or aftermarket source does not
have low level RCA jacks. It is not recommended to mix high and low level inputs. Engine noise in the system will
probably result.
ome of the system possibilities are shown in the System Diagrams section of this manual.
When working with power connections always hook up the ground wire first and disconnect the ground wire last.
Never make any wiring changes with the amplifier powered up.
The chassis mounted fuse(s) are in place to protect the circuitry of the amplifier in the event of major trouble. An
in-line fuse must be installed within 18 inches of the battery to protect the power wire used to supply current to
the amplifier. For the Kicker Impulse IX406 amplifier a fuse value of 60A and 8 gauge power wire are recommended.
If the power wire is longer than 10 feet, it is recommended that the wire size be 4 gauge to reduce losses.
Any time that a power wire goes through a metal panel such as the firewall, or if there is any chance of abrasion,
it is necessary to use a grommet or other suitable form of protection to avoid shorts.
The ground wire should be at least 8 gauge, as short as possible and attached to the body of the vehicle. The
ground point must be free from paint and corrosion.
Mounting the IMPULSE Amplifier
After determining an appropriate mounting
location which provides good air circulation and
access to the end panel controls, use the supplied
screws and washers to firmly mount the amplifi-
er.The amplifier chassis can be used as a template
for the screw locations. Check to make sure that
the mounting screws will not damage any compo-
nents on the back side of the chosen mounting
surface.
If a vertical mounting surface is chosen, we rec-
ommend that the heatsink fins run vertically as
shown for improved cooling.

Produkt Specifikationer

Mærke: Kicker
Kategori: Bilradio
Model: IX 406 Impulse

Har du brug for hjælp?

Hvis du har brug for hjælp til Kicker IX 406 Impulse stil et spørgsmål nedenfor, og andre brugere vil svare dig


Bilradio Kicker Manualer

Kicker

Kicker KX300.4 Manual

4 Oktober 2024
Kicker

Kicker IX 406 Impulse Manual

22 September 2024
Kicker

Kicker DX500.1 Manual

12 September 2024
Kicker

Kicker IX 702 Impulse Manual

31 August 2024
Kicker

Kicker KX850.2 Manual

31 August 2024
Kicker

Kicker X50 Manual

23 August 2024
Kicker

Kicker zx 350 2 Manual

23 August 2024
Kicker

Kicker KX 400.4 Manual

22 August 2024
Kicker

Kicker ZX 300.1 Manual

22 August 2024
Kicker

Kicker kx 600 1 Manual

22 August 2024

Bilradio Manualer

Nyeste Bilradio Manualer

Krüger&Matz

Krüger&Matz KM2014 Manual

9 Juni 2025
Blow

Blow Pilot AVH-8624 Manual

9 Juni 2025
Krüger&Matz

Krüger&Matz KM2009 Manual

9 Juni 2025
Krüger&Matz

Krüger&Matz KM2004 Manual

9 Juni 2025
Vordon

Vordon York HT-930 Manual

8 Juni 2025
Carlinkit

Carlinkit CPC200-U2W Plus Manual

8 Juni 2025
Vordon

Vordon Jersey HT-800 Manual

8 Juni 2025
Peiying

Peiying PY-8288 Manual

7 Juni 2025
Boss

Boss MCK508WB Manual

7 Juni 2025
Peiying

Peiying PY-9348 Manual

6 Juni 2025