Kicker KX 800.4 Manual
Læs nedenfor 📖 manual på dansk for Kicker KX 800.4 (12 sider) i kategorien Bilradio. Denne guide var nyttig for 23 personer og blev bedømt med 3.9 stjerner i gennemsnit af 12 brugere
Side 1/12
Congratulations! You have just purchased the latest in amplifier tech-
nology to carry the famous KICKER name. Your KICKER KX series
amplifier is designed and built to give you years of powerful and trou-
ble-free performance. This installation manual contains valuable infor-
mation on how to get the most out of your new KX series amplifier.
Thanks for buying KICKER. Enjoy!
KX Amplifier Features
Low Impedance Operation Stable into 2 ohm stereo or 4 ohm mono loads.
SORT Protection Circuitry (Short circuit, Over-voltage, Reverse polarity,
Thermal) Protects amplifier from accidents and undesired operation.
MOSFET Power Supply Provides high efficiency operation.
KickBass Variable bass boost circuit which provides up to 18 dB of boost at 40
Hz.
Built-In Variable Crossover 12 dB High pass or Low pass variable from 50-
200 Hz. Defeatable for full range operation.
High & Low level inputs Allows connection to various sources such as: after-
market stereo, factory radio, DVD Player, Video Cassette Player, etc..
Custom tooled gold plated connectors Assure maximum power transfer
and damping.
SAMS (Stereo And Mono Simultaneously) Amplifier will operate into a bridged
mono load and a stereo load at the same time.
Remote Bass Level Control Dash mounted for maximum control.
(Not included in the KX300.4)
Two Year Warranty When
purchased from and installed by
an Authorized
KICKER Dealer.
KX300.4 / KX600.4 / KX800.4
2
With the shroud removed, you now have access to the four mounting holes in
the mounting feet and all wiring connections. Drill 4 holes using a 7/64” drill bit
and use the supplied #8 screws to mount the amplifier.
REMOVE REMOVE
REMOVE
REMOVE
Mounting Instructions
When selecting a location to mount your Kicker amplifier be sure it is struc-
turally sound and that there are no items behind the area that could be dam-
aged by the screws. Check for brake lines, fuel lines, gas tanks, or wiring harness-
es etc.
All amplifiers generate heat under normal operation. Be sure to choose a loca-
tion that allows adequate ventilation for the amplifier. Also consider that the air
temperature inside an automobiles trunk can reach upwards of 140 degrees
fahrenheit. An amplifier mounted here may require additional cooling tactics
such as fans or venting to allow cool operation. If possible, mounting the amp in
the passenger compartment will allow cooler operation.
Remember that the controls on top of the amp will need to be accessible for
adjustment later. Keep this in mind as you choose your amplifier’s mounting
location.
Now that you are ready to mount your amplifier, use the supplied 3mm allen
wrench to remove the amplifier shroud. This will give you access to the mount-
ing holes in the amplifier and all wiring connections.
Produkt Specifikationer
| Mærke: | Kicker |
| Kategori: | Bilradio |
| Model: | KX 800.4 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Kicker KX 800.4 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bilradio Kicker Manualer
4 Oktober 2024
22 September 2024
12 September 2024
31 August 2024
31 August 2024
23 August 2024
23 August 2024
22 August 2024
22 August 2024
22 August 2024
Bilradio Manualer
- Bilradio Zenec
- Bilradio Xblitz
- Bilradio Audison
- Bilradio Raveland
- Bilradio Ultimate
- Bilradio Kunft
- Bilradio Smart
- Bilradio Sencor
- Bilradio Autovision
- Bilradio SPC
- Bilradio Manta
- Bilradio Twister
- Bilradio SilverCrest
- Bilradio RetroSound
- Bilradio Macrom
Nyeste Bilradio Manualer
19 Februar 2025
19 Februar 2025
19 Februar 2025
11 Februar 2025
1 Februar 2025
30 Januar 2025
30 Januar 2025
30 Januar 2025
28 Januar 2025
21 Januar 2025