Kicker KX400.2 Manual

Kicker Bilradio KX400.2

Læs gratis den danske manual til Kicker KX400.2 (12 sider) i kategorien Bilradio. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Kicker KX400.2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Congratulations! You have just purchased the latest in amplifier tech-

nology to carry the famous KICKER name. Your KICKER KX series

amplifier is designed and built to give you years of powerful and trou-

ble-free performance. This installation manual contains valuable infor-

mation on how to get the most out of your new KX series amplifier.

Thanks for buying KICKER. Enjoy!

KX Amplifier Features

NEW for 2002 Radically advanced chassis with removable chassis shroud.

Low Impedance Operation Stable into 2 ohm stereo or 4 ohm mono

loads.

SORT Protection Circuitry ( ver-voltage, Short circuit, O Reverse polarity,

Thermal) Protects amplifier from accidents and undesired operation.

MOSFET Power Supply Provides high efficiency operation.

KickBass Variable bass boost circuit which provides up to 18 dB of boost at 40

Hz.

Built-In Variable Crossover 12 dB High pass or Low pass variable from 50-

200 Hz. Defeatable for full range operation.

High & Low level inputs Allows connection to various sources such as:

aftermarket stereos, factory radios, DVD players, Video Cassette Player, etc.

PAST P A S T(re mp ignal ransfer) Output RCA jacks to pass the incoming signal to

another amplifier or component.

Custom tooled gold plated connectors Assure maximum power transfer

and damping.

SAMS S A M S( tereo nd ono imultaneously) Amplifier will operate into a bridged

mono load and a stereo load at the same time.

Remote Bass Level Control Dash mounted for maximum control.

Three Year Warranty When

purchased from and installed by

Authorized

KICKER dealer.

KX300.2 / KX400.2 / KX500.2 /

KX800.2

Mounting Instructions

When selecting a location to mount your Kicker amplifier be sure it is struc-

turally sound and that there are no items behind the area that could be dam-

aged by the screws. Check for wiring, brake lines, fuel lines, gas tanks, etc.

All amplifiers generate heat under normal operation. Be sure to choose a loca-

tion that allows adequate ventilation for the amplifier. Also consider that the air

temperature inside an automobile’s trunk can reach upwards of 140 degrees

fahrenheit. An amplifier mounted here may require additional cooling needs

such as fans or venting to allow cool operation. If possible, mounting the amp in

the passenger compartment will allow cooler operation.

Remember that the controls on top of the amp will need to be accessible for

adjustment later. Keep this in mind as you choose your amplifier’s mounting

location.

Now that you are ready to mount your amplifier, use the supplied 3mm allen

wrench to remove the amplifier shroud. This will give you access to the mount-

ing holes in the amplifier and all wiring connections.

Remove Remove

With the shroud removed, you now have access to the four mounting holes in

the mounting feet and all wiring connections. Drill 4 holes using a 7/64” drill bit

and use the supplied #8 screws to mount the amplifier.

Produkt Specifikationer

Mærke:	Kicker
Kategori:	Bilradio
Model:	KX400.2

Har du brug for hjælp?

Hvis du har brug for hjælp til Kicker KX400.2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bilradio Kicker Manualer

Kicker KX300.4 Manual

4 Oktober 2024

Kicker IX 406 Impulse Manual

22 September 2024

Kicker DX500.1 Manual

12 September 2024

Kicker IX 702 Impulse Manual

31 August 2024

Kicker KX850.2 Manual

31 August 2024

Kicker X50 Manual

23 August 2024

Kicker zx 350 2 Manual

23 August 2024

Kicker KX 400.4 Manual

22 August 2024

Kicker ZX 300.1 Manual

22 August 2024

Kicker kx 600 1 Manual

22 August 2024

Bilradio Manualer

Nyeste Bilradio Manualer

Vordon Pilot AC-920 Manual

15 Juni 2025

Manta RS4508 Manual

15 Juni 2025

Krüger&Matz KM2014 Manual

9 Juni 2025

Blow Pilot AVH-8624 Manual

9 Juni 2025

Krüger&Matz KM2009 Manual

9 Juni 2025

Krüger&Matz KM2004 Manual

9 Juni 2025

Vordon York HT-930 Manual

8 Juni 2025

Carlinkit CPC200-U2W Plus Manual

8 Juni 2025

Vordon Jersey HT-800 Manual

8 Juni 2025

Peiying PY-8288 Manual

7 Juni 2025