Kramer VS-44H2A Manual

Kramer Skifte VS-44H2A

Læs gratis den danske manual til Kramer VS-44H2A (4 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Kramer VS-44H2A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

VS-44H2A Quick Start

P/N:

2900- 301078QS

Rev:

Scan for full manual

VS- 44H2A Quick Start Guide

This guide helps you install and use your VS-44H2A for the first time.

Go to www.kramerav.com/downloads/VS-44H2A to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s b in the ox

VS-44H2A 4K HDMI 4x4 Matrix Switcher

1 Set of rack ears

4 Rubber feet

Remote control transmitter with batteries

1 Power cord

1 Quick start guide

Step 2: Get to know your VS- 44H2A

# Feature Function

IR Sensor

Receives signals from the infrared remote-control transmitter.

IR LED

Lights yellow when receiving an IR signal.

2 ALL Button Press followed by an input button to connect the selected input to all outputs .

For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs.

OFF Button

Press after pressing an output button to disconnect the selected output from the inputs.

To disconnect all the outputs, press ALL followed by OFF.

4 IN Select Buttons (1 to 4) Press to select the input to switch after selecting an output (also used for storing machine

setups).

OUT Select Buttons (1 to 4)

Press to select an output to switch followed by an input.

STO Button

Press STO followed by an INPUT (1 to 4) button to store the current switching

configuration to the location corresponding to that INPUT number.

7 RCL Button Press RCL followed by the corresponding INPUT (1 to 4) button to recall the preset

switching configuration saved in that location.

LOCK Button

Press and hold to toggle the locking/release of the front panel buttons.

EDID Button

Press EDID + STO buttons to enter EDID mode.the

OUTPUT/INPUT 7-segment LED

Display

Displays the input currently switched to the output which is marked above each input.

# Feature Function

HDMI™ IN Connectors (1 to 4)

Connect to up to 4 HDMI sources.

S/PDIF OUT (coaxial) RCA

Connectors (1 to 4)

Connect to up to 4 digital audio acceptors.

HDMI OUT Connectors (1 to 4)

Connect to up to 4 HDMI acceptors.

14 BALANCED AUDIO OUT Terminal

Block Connectors (1 to 4)

Connect to up to 4 balanced stereo audio acceptors.

PROG USB Connector

Connect to a USB stick to perform firmware upgrades.

ETHERNET RJ- 45 Connector

Connect to a PC via a LAN.

RS- -232 9 pin D-sub Connector

Connect to a PC/serial controller.

IR IN 3.5mm Mini Jack Connector

Connect to an external IR receiver for controlling the device via IR remote controller

Covered by a cap. The 3.5mm jack at the end of the internal IR connection cable fits into

this opening.

Mains Power Connector and Fuse

Plug in the power cord.

Power Illuminated Switch

Turn the device on and off.

Step 3: VS-Install the 44H2A

To rack mount the machine attach both ear brackets (by removing the three screws from each side of ,

the machine and replacing those screws through the ear brackets) or place the machine on a table.

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your VS-44H2A. For best results, we recommend that

you always use Kramer high performance cables to connect AV equipment to the - VS-44H2A.

Connect the audio output

To a balanced

stereo audio

acceptor:

To an unbalanced

stereo audio

acceptor:

Produkt Specifikationer

Mærke:	Kramer
Kategori:	Skifte
Model:	VS-44H2A

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer VS-44H2A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Kramer Manualer

Kramer AFM-20DSP Manual

1 Februar 2025

Kramer VS-48UHD Manual

11 Januar 2025

Kramer VS-21DTP Manual

19 December 2024

Kramer VP-427UHD Manual

19 December 2024

Kramer WP-211X Manual

19 December 2024

Kramer KIT-500 Manual

19 December 2024

Kramer VP-461 Manual

19 December 2024

Kramer VP-774A Manual

18 December 2024

Kramer VS-8UFX Manual

24 August 2024

Kramer VS-44H2A Manual

19 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025