Lancom GS-3152X Manual

Lancom Skifte GS-3152X

Læs gratis den danske manual til Lancom GS-3152X (1 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Lancom GS-3152X, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

TECHNICAL DATA

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This docu-

ment contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111580/0120

Hardware

Power supply Internal power supply unit (100–240 V, 50-60 Hz, 1 A max.)

Power consumption Max. 65 W

Environment Temperature range 0–40° C; humidity 10–90 %, non-condensing

Housing Robust metal housing, 1 HU with removable mounting brackets for 19“ installation,

442 x 44 x 300 mm (W x H x D)

Number of fans 1

Interfaces

ETH

SFP+

A 48 TP Ethernet ports 10 / 100 / 1000 Mbps

A 4 SFP+ ports 1 / 10 Gbps

A 52 concurrent ports in total

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with

Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of

Conformity is available at the following Internet address: www.lancom-systems.com/doc

Package Content

Manual Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Mounting brackets Two 19” brackets for rack mounting;

If an additional rear support surface is required for more stable mounting of the switch, please use the

LANCOM Switch Rack Mount L250, item no.: 61432, which is available as an accessory.

Cable IEC power cord 230 V, serial configuration cable 1.5 m

MOUNTING AND CONNECTING THE DEVICE

Reset

Configuration interface (Console)

Connect the configuration interface via the included serial

configuration cable to the serial interface of the device you want to

use for configuring / monitoring the switch.

TP Ethernet interfaces

Use Ethernet cables to connect the interfaces 1 to 48 to your PC or

a LAN switch.

SFP+ interfaces

Insert suitable LANCOM SFP modules into the SFP+ inter-

faces 49 to 52. Choose cables which are compatible with the

SFP modules and connect them as described in the module’s

documen tation.

Power connector (device back side)

Supply power to the device via the power connector. Please use

the IEC power cable supplied or a country-specific LANCOM

Power Cord.

Please observe the following when setting up the device

A The mains plug of the device must be freely accessible.

A For devices to be operated on the desktop, please attach the adhesive rubber

footpads.

A Do not rest any objects on top of the device and do not stack multiple devices.

A Keep the ventilation slots on the side of the device clear of obstruction.

A Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

If an additional rear support surface is required for more stable mounting of the switch, please use the

LANCOM Switch Rack Mount L250.

A Please note that support for third-party accessories (SFP and DAC) is not provided.

LANCOM GS-3152X

Quick Reference Guide

Cloud-ready

d 10 G SFP+ ports

Off Port inactive or disabled

Blue Link 10 Gbps

Blue, blinking Data transfer, link 10 Gbps

Green Link 1 Gbps

Green, blinking Data transfer, link 1 Gbps

c TP Ethernet ports

Off Port inactive or disabled

Green Link 1000 Mbps

Green, blinking Data transfer, link 1000 Mbps

Orange Link ≤ 100 Mbps

Orange, blinking Data transfer, link ≤ 100 Mbps

b Reset button

Pressed until all port

LEDs are off

Device restart

Pressed until all port

LEDs glow permanently

Configuration reset and device restart

a System LED

Off Device powered off

Green Device operational

Red Hardware error

b dca

b ca

Reset

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

Produkt Specifikationer

Mærke:	Lancom
Kategori:	Skifte
Model:	GS-3152X
Vekselstrømsindgangsspænding:	110 - 230 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	442 mm
Dybde:	300 mm
Højde:	44 mm
Vægt:	4100 g
Brugervejledning:	Ja
Produktfarve:	Sort
Formfaktor:	1U
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Driftstemperatur (T-T):	0 - 40 °C
Sikkerhedsalgoritmer:	SNMPv3, SSH, SSL/TLS
Husmateriale:	Metal
Hurtig start guide:	Ja
Kabler inkluderet:	AC, Serial
Certificering:	CE, FCC
Strømforbrug (maks.):	65 W
Netværksstandarder:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Harmoniseret systemkode (HS):	85176990
Firmware kan opgraderes:	Ja
Strøm over Ethernet (PoE):	Ingen
Switch-type:	Administreret
Switch lag:	L3
10G understøttelse:	Ja
Spanning tree protokol:	Ja
VLAN understøttelse:	Ja
Port-spejlning:	Ja
Antal VLAN'er:	4096
Link aggregering:	Ja
Kobber ethernet kabelteknologi:	10BASE-T, 100BASE-T, 1000BASE-TX
Broadcast stormkontrol:	Ja
Vituelle LAN funktioner:	Port-based VLAN, Tagged VLAN, Voice VLAN
Basis omskiftning RJ-45 Ethernet porte, antal:	48
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
Port til konsol:	RJ-45
Adgangskontrolliste (ACL):	Ja
Godkendelse:	Guest VLAN, MAC-based authentication, Port-based authentication
MAC adresselabel:	32000 entries
Switch kapacitet:	176 Gbit/sek.
Jumbo Frames support:	Ja
Jumbo rammer:	10240
Stativ-montering:	Ja
Antal blæsere:	1 blæser(e)
Gigabit Ethernet (kobber) porte, antal:	48
Strømforsyning inkluderet:	Ja
DHCP funktioner:	DHCP client, DHCP relay, DHCP server
Rack monteringskit:	Ja
SSH/SSL support:	Ja
Antal SFP + modulslots:	4
Statisk rute:	Ja
Godkendelsestype:	AAA
GARP VLAN registreringsprotokol (GVRP):	Ja
IGMP proxy:	Ja