LiftMaster HCT10 Manual


Læs gratis den danske manual til LiftMaster HCT10 (61 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 150 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 75.5 anmeldelser. Har du et spørgsmål om LiftMaster HCT10, eller vil du spørge andre brugere om produktet?

Side 1/61
COMMERCIAL 24VDC HIGH TRAFFIC
OVERHEAD DOOR AND GATE OPERATOR
WITH BATTERY BACKUP
Model HCTDCUL
INSTALLATION MANUAL
LiftMaster
300 Windsor Drive
Oak Brook, IL 60523
HCTDCUL
Motor Unit
HCT08
8 Foot Rail
HCT10
10 Foot Rail
HCT12
12 Foot Rail
HCT14
14 Foot Rail
HCT16
16 Foot Rail
HCTDCULTECH
Access installation and technical support
guides or register this product
Send it in by texting the
photo to 71403.
Take a photo of the
camera icon including
the points ( ).
1.
2.
THIS PRODUCT IS TO BE INSTALLED AND
SERVICED BY A TRAINED TECHNICIAN ONLY.
This model is for use on vehicular passage
gates or commercial doors ONLY and not
intended for use on pedestrian passage gates.
Install the operator at least 8 feet (2.4 m) above
the floor.
This model is intended for use in Class II, III and
IV vehicular trolley gate or commercial door
applications.
Visit LiftMaster.com to locate a professional
installing dealer in your area.
This gate/door operator is compatible with
MyQ® and Security+ 2.0® accessories.
2
TABLE OF CONTENTS
SAFETY
Safety Symbol and Signal Word Review
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
When you see these Safety Symbols and Signal Words on the following pages, they will alert
you to the possibility of if you do not comply with the warnings that Serious Injury or Death
accompany them. The hazard may come from something mechanical or from electric shock.
Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the possibility of
damage to your gate and/or the gate operator if you do not comply with the cautionary
statements that accompany it. Read them carefully.
IMPORTANT NOTE:
BEFORE attempting to install, operate or maintain the operator, you must read and fully
understand this manual and follow all safety instructions.
DO NOT attempt repair or service of your gate operator unless you are an Authorized
Service Technician.
MECHANICAL
ELECTRICAL
SAFETY 2
Safety symbol and signal word review ....................................................2
Usage Class ..............................................................................................3
UL325 Entrapment Protection Requirements ...........................................3
Safety Installation Information ..................................................................4
Gate Construction Information ..................................................................5
INTRODUCTION 6
Carton Inventory .......................................................................................6
Operator Specifications .............................................................................7
Overview of Typical Installation ................................................................8
INSTALLATION 9
Important Installation Instructions ............................................................9
Step 1 Connect Rail to Operator .............................................................10
Step 2 Install Vented Plug ......................................................................11
Step 3 Determine Location for Operator .................................................11
Step 4 Mount the Operator .....................................................................12
Step 5 Install Entrapment Protection ......................................................13
WIRING 15
Step 6 Power Wiring ...............................................................................15
Step 7 Connect Batteries and Attach Antenna.........................................16
ADJUSTMENT 17
Limit and Force Adjustment ....................................................................17
Obstruction Test .....................................................................................18
OPERATOR OVERVIEW 19
PROGRAMMING 20
Remote Controls (Not Provided) ............................................................20
LiftMaster Internet Gateway (Not Provided) ...........................................21
Erase All Codes .......................................................................................21
Erase Limits ............................................................................................21
Constant Pressure Override (CPO) .........................................................21
Gate Hold Open Feature ..........................................................................21
To Remove and Erase Monitored Entrapment Protection Devices ..........21
Limit Setup with a Remote Control .........................................................22
OPERATION 23
Gate/Door Operator Setup Examples ......................................................23
Control Board Overview ..........................................................................24
Reset Button ...........................................................................................25
Operator Alarm .......................................................................................25
Adjsutable Open Speed ...........................................................................25
Remote Control .......................................................................................25
Manual Disconnected ..............................................................................26
ACCESSORY WIRING 27
External Control Devices .........................................................................27
External Reset Button .............................................................................27
Miscellaneous Wiring ..............................................................................28
EXPANSION BOARD 30
Expansion Board Overview .....................................................................30
Auxiliary Relay 1 and 2 ...........................................................................31
Wiring Accessories to the Expansion Board ...........................................32
MAINTENANCE 33
Important Safety Instructions .................................................................33
Maintenance Chart ..................................................................................33
Batteries ..................................................................................................33
TROUBLESHOOTING 34
Diagnostic Codes ....................................................................................34
Diagnostic Codes Table ..........................................................................35
Control Board LEDs ................................................................................37
Troubleshooting Chart ............................................................................38
WIRING DIAGRAM 41
REPAIR PARTS 42
ACCESSORIES 43
WARRANTY 45


Produkt Specifikationer

Mærke: LiftMaster
Kategori: Ikke kategoriseret
Model: HCT10

Har du brug for hjælp?

Hvis du har brug for hjælp til LiftMaster HCT10 stil et spørgsmål nedenfor, og andre brugere vil svare dig