LiftMaster RSW12UL Manual


Læs gratis den danske manual til LiftMaster RSW12UL (38 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 159 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 80 anmeldelser. Har du et spørgsmål om LiftMaster RSW12UL, eller vil du spørge andre brugere om produktet?

Side 1/38
Model RSW12UL
THIS PRODUCT IS TO BE INSTALLED AND
SERVICED BY A TRAINED GATE SYSTEMS
TECHNICIAN ONLY.
This model is for use on vehicular passage
gates ONLY and not intended for use on
pedestrian passage gates.
This model is intended for use in Class I and II
vehicular swing gate applications.
Visit LiftMaster.com to locate a professional
installing dealer in your area.
This gate operator is compatible with MyQ®
and Security+ 2.0® accessories.
LiftMaster
300 Windsor Drive
Oak Brook, IL 60523
RESIDENTIAL DC
VEHICULAR SWING GATE OPERATOR
INSTALLATION MANUAL
Access installation and technical support
guides or register this product
Send it in by texting the
photo to 71403.
Take a photo of the camera
icon including the points ( ).
1.
2.
Acc
RSW12ULTECH
2
SAFETY 2
Safety Symbol and Signal Word Review ...................................................2
Usage Class ...............................................................................................3
UL325 Entrapment Protection Requirements ............................................3
Safety Installation Information ...................................................................4
Gate Construction Information ...................................................................5
INTRODUCTION 6
Carton Inventory ........................................................................................6
Operator Specifications ..............................................................................7
Site Preparation .........................................................................................8
Check Your Gate ........................................................................................8
INSTALLATION 9
Step 1 Determine Location for Concrete Pad and Operator .......................9
Step 2 Concrete Pad and Operator Attachment .......................................11
Step 3 Position the Gate Bracket .............................................................12
Step 4 Adjust the Operator Arm Length ...................................................12
Step 5 Secure the Operator Arm ..............................................................13
Step 6 Install Entrapment Protection .......................................................14
Step 7 Earth Ground Rod .........................................................................16
Step 8 Power Wiring ................................................................................16
Step 9 Dual Gate Setup ............................................................................18
Step 10 Install the Cover .........................................................................20
ADJUSTMENT 21
Limit and Force Adjustment .....................................................................21
Obstruction Test ......................................................................................22
PROGRAMMING 23
Remote Controls (Not Provided) .............................................................23
LiftMaster Internet Gateway (not provided) .............................................24
Erase All Codes ........................................................................................24
Erase Limits .............................................................................................24
Constant Pressure Override (CPO) ..........................................................24
Gate Hold Open Feature ...........................................................................24
To Remove and Erase Monitored Entrapment Protection Devices ...........24
OPERATION 25
Control Board Overview ...........................................................................25
Manual Disconnect ..................................................................................26
Reset Switch ............................................................................................26
Operator Alarm .......................................................................................26
Remote Control ........................................................................................26
ACCESSORY WIRING 27
External Control Devices ..........................................................................27
Locks .......................................................................................................28
Miscellaneous Wiring ...............................................................................28
MAINTENANCE 29
Important Safety Information ...................................................................29
Maintenance Chart ...................................................................................29
Batteries ...................................................................................................30
TROUBLESHOOTING 31
Diagnostic Codes .....................................................................................31
Diagnostic Codes Table ...........................................................................32
Control Board LEDs .................................................................................34
Troubleshooting Chart .............................................................................35
APPENDIX 38
Dual Gate Settings ...................................................................................38
Types of Installations ...............................................................................38
Step 1 Determine Location for Concrete Pad and Operator .....................39
Step 2 Concrete Pad and Operator Attachment .......................................39
Step 3 Shorten the Operator Arm ............................................................40
Step 4 Position the Gate Bracket .............................................................40
Step 8 Solar Panel(s) ...............................................................................41
Limit Setup with a Remote Control ..........................................................45
WIRING DIAGRAM 46
REPAIR PARTS 47
ACCESSORIES 48
WARRANTY 50
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
When you see these Safety Symbols and Signal Words on the following pages, they will alert
you to the possibility of if you do not comply with the warnings that Serious Injury or Death
accompany them. The hazard may come from something mechanical or from electric shock.
Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the possibility of
damage to your gate and/or the gate operator if you do not comply with the cautionary
statements that accompany it. Read them carefully.
IMPORTANT NOTE:
BEFORE attempting to install, operate or maintain the operator, you must read and fully
understand this manual and follow all safety instructions.
DO NOT attempt repair or service of your gate operator unless you are an Authorized
Service Technician.
MECHANICAL
ELECTRICAL
TABLE OF CONTENTS
SAFETY
Safety Symbol and Signal Word Review


Produkt Specifikationer

Mærke: LiftMaster
Kategori: Ikke kategoriseret
Model: RSW12UL

Har du brug for hjælp?

Hvis du har brug for hjælp til LiftMaster RSW12UL stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret LiftMaster Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer