GENERAL CHARACTERISTICS
This 3½ digit multimeter is perfect for measuring DC and
AC voltage, DC current, resistance and diode. It also has a
continuity function and can be used as a logical tester. It is ideal
for work and home use as well.
specification
1. Displaying: 20 mm digit height LCD display
2. Max. Indication: 1999 (3 1/2) auto polarity indication
3. Sampling rate: approx. 3 times/ sec
4. Over Range Indication: displays "1"
5. Low Battery Indication: " " symbol displays.
6. Operation Environment: (0~40)°C, relative humidity
<80%
7. Power: 9V battery (NEDA1604/6F22 or equivalent)
8. Measurement: 115 × 60 × 30mm
(Length×Width×Height)
9. Weight: approx. 170 g (including a 9V battery)
THE FRONT PANEL
1. Display: 3½ digits, 7 segments, large LCD
2. „HOLD” button
During measurement press the button then xed a
measurement value in the display.
3. Backlight ON/OFF
4. Function and range switch
This switch selects the functions and the desired range. It also
turns the device on. To prolong battery life set it to OFF
when you are not using the device.
5. “10A” banana (wire) connector
Connect the red (positive) measuring wire into this connector
to measure 10A current.
6. “VΩmA” banana connector
Connect the red measuring wire into this connector to measure
every kind of voltage, resistance and current (except for 10A)
7. “COM” banana connector
Connect the black (negative) measuring wire here
TECHNICAL DATA
DC voltage
Range Resolution Accuracy
200mV 100uV
±1.0% +10D
2000mV 1mV
20V 10mV
200V 100mV
500V 1V
Overload protection: 600V DC
Input impedance: 1MΩ
AC voltage
Range Resolution Accuracy
200V 100mV
±2.0% +10D
500V 1V
Frequency range: 40Hz ~ 400Hz
Overload protection: 500V RMS
Input impedance: 1MΩ
Continuity test with audio signal
Range Description
A built-in beeper signals if the
resistance is below 70±30Ω
Measures the opening voltage of
the diode
Overload protection: 250V DC/AC peak value
DC current
Range Resolution Accuracy
200μA 0,1μA
±2.0% +5D
2000μA 1μA
20mA 10μA
200mA 100μA
10A 10mA ±3.0%+5D
Overload protection: 200mA/250V fuse
Max. input current: 10A (max. 6 sec.)
Resistance
Range Resolution Accuracy
200Ω 100mΩ
±2.0%+5D
2000Ω 1Ω
20KΩ 10Ω
200KΩ 100Ω
2MΩ 1KΩ
Max. open circuit voltage: 3V
Overload protection: 15 seconds maximum 250V RMS
