Neumann LH 46 Manual

Neumann højttalerstøtte LH 46

Læs gratis den danske manual til Neumann LH 46 (4 sider) i kategorien højttalerstøtte. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Neumann LH 46, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

LH 46

Mounting manual

Important safety and mounting instructions

• Have the product mounted by a specialist.

• Due to his/her technical training, know-how and experience as well

as knowledge of relevant provisions, regulations and standards, the

specialist must be able to assess assigned tasks, recognize poten-

tial hazards and ensure appropriate safety measures. The following

safety and mounting instructions are addressed to this specialist.

•

Read and follow the safety and mounting instructions, keep these

instructions and always include them when passing the LH46 on

to third parties.

•

Also read and follow the installation instructions contained in the

operating manual of the mounted loudspeaker.

• When mounting, observe and follow the local, national and interna-

tional regulations and standards.

•

Do not install the LH46 in locations where it is exposed to externally

generated vibrations.

• Always use the original Neumann supplied parts.

•

Mount the LH46 in combination with other accessories from the

Neumann mounting hardware range to loudspeakers with a maxi-

mum weight of 60 kg (132.3 lbs).

Download the PDF file “Hardware Mounting Matrix” from

www.neumann.com. Only combine the Neumann mounting

hardware as specified in the “Hardware Mounting Matrix”.

CAUTION!

Danger of injury and material damage due to dropping of

the mounting plate A and the inner tube of the telescopic

tube D

Unless the mounting plate A of the LH46 is properly attached to

a strong horizontal surface and the inner tube of the telescopic

tube D is secured in place with screws, these parts can drop down.

When mounting, have the mounting plate A and the inner tube

of the telescopic tube D held by a second specialist who is phy-

sically able to do so. The requirements mentioned earlier also

apply to this specialist.

•

Attach the mounting plate A of the LH 46 to a strong horizontal

surface.

– The surface must be able to carry the weight of the loudspeaker

plus the weight of all parts used. Calculate the weight and addi-

tionally consider the leverage.

–

Use fastening elements (not supplied) that are sufficien y dimen-

sioned for the calculated weight and suitable for the material of

the surface.

–

Use all 8 mounting points of the mounting plate A to attach the

LH 46 to the horizontal surface.

•

Use at least one hex head screw C to secure the inner tube of the

telescopic tube D against dropping (see fi . 1).

•

Place the telescopic tube D onto the mounting cylinder B and fasten

the telescopic tube to the mounting cylinder using 4 of the hex head

screws C.

•

To do so, use the 5 mm Allen key G and tighten the screws with a

torque of 15Nm (see fi .1).

•

Only adjust and secure the height of the telescopic tube when a

load is not attached:

–

To prevent the inner tube from accidentally slipping out of the

telescopic tube, always hold the inner tube with one hand when

adjusting the height.

– Loosen the hex head screw C which secures the inner tube of the

telescopic tube.

–

Pull the inner tube out of the telescopic tube to adjust the desired

height.

–

Secure the desired height with 2 of the hex head screws C and

tighten the screws with a torque of 15Nm.

• Attach additional Neumann mounting hardware that is suitable for

use with the LH 46 to your loudspeaker (see the “Hardware Moun-

ting Matrix”).

–

Also read and follow the safety and mounting instructions contai-

ned in the operating manuals of the selected Neumann mounting

hardware.

–

Only tilt the loudspeaker when it is properly fastened to the LH46

and to additional Neumann mounting hardware, and when it is

secured.

• Mount the loudspeaker plus additionally attached hardware to the

telescopic tube D. To do so, proceed as follows:

CAUTION!

Danger of injury and material damage

due to dropping of the loudspeaker

Unless the additional hardware is properly fastened to the

telescopic tube D, the loudspeaker together with the mounting

hardware can drop down.

Have the loudspeaker held by a second specialist who is phy-

sically able to do so. The requirements mentioned earlier also

apply to this specialist.

When mounting the loudspeaker, provide a sufficien additi-

onal protection against dropping.

–

Loosen the 4 Allen head boltsF of the locking ringE, position

the locking ring in the upper position and tighten one of the 4

Allen head bolts F so that the locking ringE cannot work loose

and fall off.

– Place the loudspeaker plus additionally attached hardware onto

the telescopic tube D as shown in figs. 3, 4 and 5

– Loosen the previously tightenedAllen head boltF of the locking

ring E (see fi . 6) and lower the locking ring E (see fi .7).

–

Tighten the previously loosened Allen head boltF so that the

locking ring E is fi ed loosely in the lower position.

– Rotate the loudspeaker in the desired direction.

–

Tighten the 4 Allen head boltsF of the locking ringE with a torque

of 15Nm. The loudspeaker with attached additional hardware is

now properly fastened to the LH 46.

•

Use safety wires to additionally protect the loudspeaker and the

mounting hardware against tipping/dropping. The safety wires, rope

terminations and coupling links must comply in their dimensioning

and condition with the regulations and standards of the country in

which they are used and must reliably prevent tipping/dropping of

the attached loudspeaker and mounting hardware.

• Make sure that ...

–

the LH 46, the associated mounting hardware and the loud-

speaker cannot tip over or drop down, even if the power or audio

cables are pulled;

–

you replace the safety wires and coupling links by new ones when

they have prevented tipping/dropping;

–

you check every 3 months if all screws are properly tightened

and if the LH46 and associated mounting hardware, additional

fastening elements, safety wires and coupling links, as well as the

loudspeaker are in proper condition.

In case of any damage or any deviation from the safety and mounting

instructions, immediately dismount the loudspeaker, the LH46 and

the additional mounting hardware used.

GEORG NEUMANN GMBH · LEIPZIGER STR. 112 · 10117 BERLIN · GERMANY

TEL +49 (0)30 / 41 77 24-0 · FAX -50 · HEADOFFICE@NEUMANN.COM · WWW.NEUMANN.COM

10/15 · 549182/A 02

Adjustable Ceiling Drop Adapter

Produkt Specifikationer

Mærke:	Neumann
Kategori:	højttalerstøtte
Model:	LH 46

Har du brug for hjælp?

Hvis du har brug for hjælp til Neumann LH 46 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

højttalerstøtte Neumann Manualer

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

højttalerstøtte Manualer

Nyeste højttalerstøtte Manualer

Sonorous SP 600 Manual

27 Februar 2025

Axis TC1601 Manual

20 Februar 2025

SoundTube SM1290 Manual

20 Februar 2025

Nubert BS-652 Manual

5 Februar 2025

NeoMounts NS-SHELF100 Manual

14 Januar 2025

Sonos Arc Ultra Wall Mount Manual

14 Januar 2025

Omnitronic STS-1 Manual

31 December 2025

Omnitronic EUMO-2 Manual

31 December 2025

Konig & Meyer 24496 Manual

30 December 2025

Bowers Wilkins FS-700 S3 Manual

30 December 2025