Neumann LH 61 Manual

Neumann højttalerstøtte LH 61

Læs gratis den danske manual til Neumann LH 61 (3 sider) i kategorien højttalerstøtte. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Neumann LH 61, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

LH 61

Mounting manual

Important safety and mounting

instructions

• Read and follow the safety and mounting instructions, keep these

instructions easily accessible and always include them when pas-

sing the LH 61 on to third parties.

• Also read and follow the installation instructions contained in the

operating manual of the studio monitor to be mounted.

• When mounting, follow the local, national and international regu-

lations and standards.

Intended use

The LH 61 is a holder for mounting a studio monitor on a ceiling or a

stand and providing optimal orientation. The LH 61 is only suitable

for 2-way studio monitors and must only be used indoors in clean, dry

rooms such as studios.

To properly mount the LH61 together with a studio monitor, you need

additional Neumann accessories (see the “Mounting Hardware Mat-

rix” at www.neumann.com) and additional fastening elements for

mounting on a ceiling, which are not included with delivery.

The LH 61 must not be used for other purposes or in other environ-

ments. In case of any damage or any deviation from the safety and

mounting instructions, immediately dismount the studio monitor and

the LH61.

Required qualiﬁcations

Only skilled personnel may attach the LH61 to the studio monitor

and mount it on a ceiling or stand. Due to his/her technical training,

know-how and experience as well as knowledge of relevant provisi-

ons, regulations and standards, the specialist must be able to assess

assigned tasks, recognize potential hazards and ensure appropriate

safety measures.

Safety instructions for mounting

• Mount only one LH 61 to one studio monitor, as described in these

assembly instructions.

• If the studio monitor is heavy, ﬁnd a second person to help carry

out the work; during the work, place the studio monitor on a ﬂat,

stable surface that can support its weight.

• Place something soft underneath the studio monitor so that you do

not scratch its surface while performing the work.

• Always use the enclosed original accessories.

• The ceiling or stand must be able to support the weight of the stu-

dio monitor and all accessories used, such that no parts will fall

even if someone pulls hard on the power or audio cables. When cal-

culating the weight, also take into account the additional leverage.

• When mounting the LH61 on a ceiling, use fastening elements (not

included with delivery) that are suciently dimensioned to ensure

that the entire weight is held securely.

• Mount the LH61 and the attached studio monitor on a ﬂat, non-slip

surface or on a suitable stand.

• Attach the angle piece to the ceiling or stand. If necessary, use

additional Neumann accessories (e.g. LH29 or LH43 in combina-

tion with LH47).

• Then attach the mounting bracket and the brace for the vertical inc-

lination adjustment to the angle piece and hook the studio monitor

into the LH61. Then adjust the studio monitor to the desired inc-

lination.

• Tighten all screws by hand. Once you have ﬁnished mounting and

aligning the studio monitor, ensure that all screws are ﬁrmly tigh-

tened.

• Take additional measures to ensure that the LH61 and the attached

studio monitor cannot fall. Use safety wires that are suciently

dimensioned for the weight to be secured.

• Every 3 months, check that all screws are properly tightened and

that the LH 61, the studio monitor and the ceiling or stand to which

the LH 61 is fastened are in the proper condition.

• Replace the safety wire once it has already prevented the studio

monitor from falling once.

Delivery includes

A: 1 x mounting bracket

B: 1 x brace for vertical inclination adjustment

C: 1 x angle piece

D: 2 x metal washers, M6

E: 2 x Allen screws, M8x12

F: 6 x Allen screws, M6x12

G: 1 x Allen key, 5mm

H: 1 x Allen key, 4mm

Speciﬁcations

Weight 1.2kg

Dimensions when assembled approx. 193x78x284mm (H x W x D)

Max. load 10kg

Warranty

For the current terms and conditions of the warranty, please visit

www.neumann.com.

   ·  .  ·   ·  / · /

  () /   - ·  - · @. · ..

Produkt Specifikationer

Mærke:	Neumann
Kategori:	højttalerstøtte
Model:	LH 61

Har du brug for hjælp?

Hvis du har brug for hjælp til Neumann LH 61 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

højttalerstøtte Neumann Manualer

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

højttalerstøtte Manualer

Nyeste højttalerstøtte Manualer

Sonorous SP 600 Manual

27 Februar 2025

Axis TC1601 Manual

20 Februar 2025

SoundTube SM1290 Manual

20 Februar 2025

Nubert BS-652 Manual

5 Februar 2025

NeoMounts NS-SHELF100 Manual

14 Januar 2025

Sonos Arc Ultra Wall Mount Manual

14 Januar 2025

Omnitronic STS-1 Manual

31 December 2025

Omnitronic EUMO-2 Manual

31 December 2025

Konig & Meyer 24496 Manual

30 December 2025

Bowers Wilkins FS-700 S3 Manual

30 December 2025