Neumann LH 47 Manual

Neumann højttalerstøtte LH 47

Læs gratis den danske manual til Neumann LH 47 (2 sider) i kategorien højttalerstøtte. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Neumann LH 47, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

LH 47

Mounting manual

Important safety and mounting instructions

• Have the product mounted by a specialist.

• Due to his/her technical training, know-how and experience as well

as knowledge of relevant provisions, regulations and standards, the

specialist must be able to assess assigned tasks, recognize poten-

tial hazards and ensure appropriate safety measures. The following

safety and mounting instructions are addressed to this specialist.

•

Read and follow the safety and mounting instructions, keep these

instructions and always include them when passing the LH 47 on

to third parties.

•

Also read and follow the installation instructions contained in the

operating manual of the mounted loudspeaker.

• When mounting, observe and follow the local, national and interna-

tional regulations and standards.

•

Only mount loudspeakers in combination with other accessories from

the Neumann mounting hardware range to the LH 47 (see below).

•

Only mount one loudspeaker with a maximum weight of 65 kg

(143.3 lbs) to the LH 47.

•

Do not install the LH 47 in locations where it is exposed to externally

generated vibrations.

• Always use the original supplied parts.

In the following you will be asked to combine other acces-

sories from the Neumann mounting hardware range with the

LH 47. Download the PDF file “Hardware Mounting Matrix”

from www.neumann.com. Only combine the Neumann moun-

ting hardware as specified in the “Hardware Mounting Matrix”.

•

First attach a Neumann mounting hardware that features a cylinder-

shaped holder (e.g. LH 43, 45, 46) to a vertical or horizontal surface.

Follow the safety and mounting instructions contained in the operat-

ing manual of the selected mounting hardware.

Horizontal surfaces must be able to carry the weight of all parts

used plus the weight of the loudspeaker. With vertical surfaces,

you additionally have to consider the leverage.

•

Fasten your loudspeaker to a Neumann mounting hardware that is

also suitable for mounting to the LH47 (e.g. LH25, LH 42, LH61, refer

to the “Hardware Mounting Matrix”). Follow the safety and mount-

ing instructions contained in the operating manual of the selected

mounting hardware.

•

Next attach the LH 47 to the mounting hardware/loudspeaker

combination (see fi . 1).

–

If di erent mounting positions are possible, choose mounting

points that minimize leverage when the loudspeaker is tilted.

– Tighten the nuts with a torque of 20Nm.

•

Now mount the LH 47 onto the cylinder-shaped holder F of the

Neumann mounting hardware. To do so, proceed as shown in fi .2.

CAUTION!

Danger of injury and material damage

due to dropping of the loudspeaker

Unless the LH 47 is properly fastened to the cylinder-shaped

holder, the loudspeaker together with the mounting hardware

can drop down.

Have the loudspeaker held by a second specialist who is

physically able to do so. The requirements mentioned ear-

lier also apply to this specialist.

When mounting the loudspeaker, provide a sufficien addi-

tional protection against dropping.

– Position the locking ring of the cylinder-shaped holder F in the

upper position and tighten the 4 Allen screws so that the locking

ring cannot work loose and fall o .

– Place the LH 47 onto the cylinder-shaped holder F as shown in

 gs. 2, 3 and 4.

– Loosen the 4Allen screws of the locking ring (see  g. 5a).

– Lower the locking ring into position (see  g 5b).

– Tighten the 4 Allen screws with a torque of 15Nm. The LH 47 is

now properly fastened to the cylinder-shaped holder F.

•

Use safety wires to additionally protect the loudspeaker and the

mounting hardware against dropping. The safety wires, rope ter-

minations and coupling links must comply in their dimensioning

and condition with the regulations and standards of the country in

which they are used and must reliably prevent dropping of a load

of 65 kg (143.3 lbs).

• Make sure that ...

– you use both screws C

to fasten the LH 47 to suitable Neumann

mounting hardware;

–

the surface to which you fasten the Neumann mounting hardware

cannot tip over or drop down;

–

the LH 47, the associated mounting hardware and the loudspeaker

cannot tip over or drop down, even if the power or audio cables

are pulled;

–

you check every 3 months if all screws are properly tightened and

if the LH 47 and associated mounting hardware, additional fasten-

ing elements, as well as the loudspeaker are in proper condition.

In case of any damage or any deviation from the safety and mounting

instructions, immediately dismount the loudspeaker, the LH 47 and

the additional mounting hardware used.

Delivery includes

A: 1 x LH 47 mounting

adapter plate

B: 4 x washers

C: 2 x M8x25 screws

D: 2 x lock washers

E: 2 x M8 nuts

Specification

Weight 250 g (0.6 lbs)

Dimensions 16 x 145 x 80 mm

(H x W x D)

⅝” x 5 ¾” x 3 ⅛”

(H x W x D)

Max. load 65 kg (143.3 lbs)

Guarantee

For the current terms and conditions of the product guarantee please

visit www.neumann.com.

GEORG NEUMANN GMBH · LEIPZIGER STR. 112 · 10117 BERLIN · GERMANY 10/15 · 544942/ A02

TEL +49 (0)30 / 41 77 24-0 · FAX -50 · HEADOFFICE@NEUMANN.COM · WWW.NEUMANN.COM

Mounting Adapter Plate

Example/Beispiel/

Exemple/Ejemplo:

LH 25

4 5

15 Nm

20 Nm

Example:

LH25

Produkt Specifikationer

Mærke:	Neumann
Kategori:	højttalerstøtte
Model:	LH 47

Har du brug for hjælp?

Hvis du har brug for hjælp til Neumann LH 47 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

højttalerstøtte Neumann Manualer

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

højttalerstøtte Manualer

Nyeste højttalerstøtte Manualer

Sonorous SP 600 Manual

27 Februar 2025

Axis TC1601 Manual

20 Februar 2025

SoundTube SM1290 Manual

20 Februar 2025

Nubert BS-652 Manual

5 Februar 2025

NeoMounts NS-SHELF100 Manual

14 Januar 2025

Sonos Arc Ultra Wall Mount Manual

14 Januar 2025

Omnitronic STS-1 Manual

31 December 2025

Omnitronic EUMO-2 Manual

31 December 2025

Konig & Meyer 24496 Manual

30 December 2025

Bowers Wilkins FS-700 S3 Manual

30 December 2025